Product Communities

We are scheduled for the AWS data center migration in mid August. Can anyone that has already been through the migration give their feedback on how that went, issues they faced, gotchas to have in mind prior to the outage? We’ve gone through Marketo’s documentation but some of it is a little vague. In addition if anyone can answer any of the questions below that will be helpful:Does anyone have any screenshots of what the pages / forms (embedded or otherwise) look like during the outage?Did you get a notification when the migration was completed? They offer to cache embedded forms - what is the benefit of this? Would this allow the forms to stay visible and receive submissions to be processed later or does it just mean they would stay visible. Did the migration get completed within the window they gave or was it longer / shorter?  Other than updating IP Addresses were there any changes that might impact webhooks, endpoints etc that we might be missing?We are also recaching out to Marke

Hi All, I ran the dispatcher utility in local and it auto-runs as part of web-tier in build stage too.Ideally one would expect same inconsistencies but there was a difference in my case. Local Validator - PS C:\Users\admin\Downloads\aem-sdk-dispatcher-tools-2.0.274-windows\bin> .\validate.cmd 'C:\projA\dispatcher\src'opt-in USE_SOURCES_DIRECTLY marker file detectedPhase 1: Dispatcher validatorCloud manager validator 2.0.892026/09/07 19:41:48 The following warnings were found: Did not find ServerAlias '*.adobeaemcloud.net' in any vhost file Did not find ServerAlias '*.adobeaemcloud.com' in any vhost file2026/09/07 19:41:48 The following suggestions are proposed: C:\projA\dispatcher\src\conf.d\enabled_vhosts\aem_publish.vhost: file is not a symlink, all files inside "enabled_vhosts" and "enabled_farms" should be symlinks2026/09/08 19:41:48 The following errors were found in the httpd config: C:\projA\dispatcher\src\conf.d\enabled_vhosts\aem_publish.vhost: link points to invalid lo

Hi Team,We are using:AEM 6.5 LTS Adobe Target AEP Web SDK (Alloy) AEM ↔ Target integration (activities are successfully created in Target)We have an AEM Targeted Parsys on a page to target the content based on the audience. The activity is successfully synchronized to Adobe Target and is Live.However, personalized content never displays. The component always renders the default content.ObservationsThe rendered HTML contains:<div class="mboxDefault" data-target-applied="fallback">and AEM generates maekup:mboxDefine(...)CQ_Analytics.TestTarget(...) Web SDK BehaviorThe page sends an Alloy request: {"decisionScopes": ["__view__"]} and Target returns propositions successfully.Returned activity IDs:xxxxxHowever, our activity:123456 is never returned in the proposition response.Activity DetailsActivity Type: XT Status: LiveAdditional FindingsThe browser does not have at.js loaded:typeof adobe?.targetreturns: undefinedbut Alloy is loaded:typeof alloyreturns:function QuestionIs the OOTB A

We're evaluating Ataccama and Celonis for metadata validation and asset completeness checks in our AEM DAM environment as part of our governance strategy.If anyone has experience integrating either tool with AEM, I'd appreciate insights on:Integration approach and any technical challenges encountered How you're leveraging these tools for metadata quality monitoring Any lessons learned or recommendations for implementationAny pointers or case studies would be helpful!

We are planning our JVM configuration for an AEM 6.5 LTS on-premises environment and are evaluating whether to continue using G1 GC or move to Generational ZGC (JDK 21).Has anyone deployed AEM 6.5 LTS in production with Generational ZGC? If so:How has it performed compared to G1 GC? Did you observe any improvements in GC pause times, throughput, or overall system responsiveness? Were there any challenges related to AEM, Oak, workflows, indexing, replication, or large content repositories? Would Adobe recommend G1 GC or Generational ZGC for production AEM 6.5 LTS deployments on JDK 21?Any real-world experiences, recommendations, or Adobe guidance would be greatly appreciated.

Hello,For my XT Activity in Target I assigned the Goal Metric to a calculated metric created in Analytics. When I use the A4T panel in Analytics conversions are always 0. When I view Reports in Target we see the conversionsAre calculated metrics unable to be used in A4T?Thank you

I’m in the midst of setting up Target Recommendations. We do not have an ecommerce site. Our use case is to recommend articles that visitors might want to read based on previous behaviours (e.g. previously viewed article categories, etc).I have reviewed the steps to set up the Catalog, i.e. Feeds, and currently working on that. This post is about the next step - Capturing user behaviour. I am using these instructions:How Do I Implement Recommendations Activities? | Adobe TargetHow Do I Use Adobe Analytics with Target Recommendations? | Adobe Targetproducts | Adobe AnalyticsFrom reviewing these and other instructions, I believe that I need to set up the products variable. We are using Wen SDK.Questions:I believe I need to add something to the schema to receive information about articles that visitors are reading. Which Field Group do I need to use?Commerce Details (Description: Commerce data such as product information (SKU, name, quantity), and standard cart operations (order, checkout

Hello Adobe Experience League team,I would like to submit an original Adobe Experience Manager case study for consideration in the Perspectives section:“When a new Oak index slows unrelated AEM queries”The article covers Oak index scope, unintended query-plan changes, SQL-2 EXPLAIN examples, and validation practices. It is written for AEM developers and administrators.Could you please share the correct editorial submission channel and preferred manuscript format? I can provide the complete DOCX or Markdown manuscript.Original reference:https://www.linkedin.com/pulse/what-oak-index-doesnt-know-your-query-santhan-b-dqwte/Regards,Santhan Battina

What is the core difference? Field based works only in one specific dataset and graph based between datasets??

Hi All, Getting the below issue - C:\Users\admin\AppData\Local\@adobe\aio-cli>aio aem-migration:dispatcher-converter -t=ams********** Executing Dispatcher Converter **********Converting Dispatcher Configurations...Found usage of undefined variable:target/dispatcher/src/conf.d/available_vhosts/aem_publish.vhost:${PUBLISH_DEFAULT_HOSTNAME}Apache configuration uses non-whitelisted directives:target/dispatcher/src/conf.d/available_vhosts/aem_publish.vhost:63 LogLeveltarget/dispatcher/src/conf.d/available_vhosts/projA_publish.vhost:63 LogLeveltarget/dispatcher/src/conf.d/available_vhosts/projB_portal_publish.vhost:64 LogLeveltarget/dispatcher/src/conf.d/available_vhosts/projB_publish.vhost:63 LogLeveltarget/dispatcher/src/conf.d/available_vhosts/projC_publish.vhost:63 LogLeveltarget/dispatcher/src/conf.d/available_vhosts/brandD_publish.vhost:63 LogLeveltarget/dispatcher/src/conf.d/available_vhosts/brandE_publish.vhost:63 LogLeveltarget/dispatcher/src/conf.d/available_vhosts/brandF_publis

Is there a way within fusion to check if a field is displayed or visible to a user?   Scenario:  Field 1 = “No”Field 2 has display logic if Field 1 = YesResult = Field 2 visible = false Looking for fusion to verify if display logic is showing or not. 

We have a Fusion Scenario Watch Event module that filters in projects based on the category ID. We have recently discovered that, because the filter is set as “CategoryID Equal”, it’s only pulling in projects where that custom form is the first one on the project.  Since the relevant custom form is not always listed first on projects, is there a way to update this filter to look through all of the custom forms on a project instead of just the first one? I’m not too well versed in Fusion but am not finding an option to manually change it to something like “CategoryID Exists”. 

Is proofing down? I've got users saying they can't open any proofs. 

  I am trying to track videos on a webpage. if webpage has 1 video, its getting tracked, but more than 1 video, when i am clicking on 2nd video. Its not getting tracked.Scenario : When i click on 1st video, its tracked, but 2nd video is not tracked. when i refresh and click on 2nd video. Its tracked  but now 2st is not tracked. (Whichever video i click first gets tracked)  This is the rule for youtube playback enable tracking. I searched on AI tools and it suspecting that problem is in this rule onlyfor 2nd video...you tube start is not happening even though all seems correctNote : The above code is for pageload irc frame in events

Test age

I am changing the snowflake login from password to key-pair. I am following the steps in the user documentation  and approved steps by a ticket opened with Adobe support.I created a key pair.The DBA created a new user and added the public key to the user. In the Adobe UI External Account I removed the password and added the new user and added the private key to the Keypair Auth tab. I am getting the error password not found.  Here’s what I have tried: Added a dummy password - same errorCreated a new external account and add the needed information, user, private key - same error  

The Vision:In current digital campaigns, optimizing content in specific sizes and formats for each platform (Web, App, Social Media) is time-consuming. We envision an intelligent workflow that automatically handles platform-specific rendering and synchronizes real-time performance analytics, all derived from a single master asset.Key Features:Context-Aware Auto Resizing: Adapting content to various device aspect ratios while preserving the focal point and text-safe zones.Dynamic Micro-Copy Suggestions: Generating headline variations on-the-fly by analyzing target audience and platform data.Closed-Loop Feedback: Automatically providing recommendations to optimize underperforming creatives by leveraging direct performance data from Adobe Analytics.Impact:This will reduce the time spent on routine tasks by at least 40% for designers and marketers, while significantly accelerating the speed of campaign launches.

Hi Community,I'm learning Adobe Experience Platform and wanted to understand a challenge that seems common in real-world implementations. When customer data is ingested from multiple channels, there can be situations where profiles are either incorrectly merged or remain fragmented due to identity conflicts. This can affect audience segmentation, personalization, and reporting. How do you typically identify, troubleshoot, and prevent identity stitching issues in production AEP environments? Any lessons learned or best practices would be greatly appreciated.

How would you debug? Send request to Edge Decisioning API for the same user (ECID)? Is there any system dataset which tracks capping? 

We are looking to manage OSGi configurations in the AMS environment instead of storing sensitive values in the codebase. In Adobe Cloud Manager, there is an option to manage environment-specific secrets and configurations. Is there a similar approach available in AMS, and if so, how can we manage these configurations securely?

Hi thereIs it possible to dynamically iterate/loop through all account numbers in an accountDetails array within an AJO Custom Action expression and:Return all account numbers for a customer Display only the last 4 digits of each account number Format the output as: 1234 1234 and 5678 1234, 5678 and 9012 (for 3+ accounts) Thanks!

Does the Target Feeds should also include products which are out of stock?

I'm looking for guidance and best practices from anyone who has implemented bilingual SMS compliance keywords in Adobe Journey Optimizer (AJO), particularly in a Canadian context.ScenarioWe're using:Adobe Journey Optimizer (AJO) Sinch as our SMS provider A single shared short code for both English and French audiencesAs part of Canadian SMS compliance requirements, we need to support mandatory opt-in/opt-out keywords in both languages, including:EnglishSTOP HELPFrenchARRET AIDEChallengeThe integration documentation between AJO and Sinch appears to rely on a single inbound webhook endpoint for processing SMS replies. Based on the documentation I've reviewed, I haven't found a clear approach for configuring language-specific automatic responses.For example:If a user texts STOP, they should receive an English confirmation message. If a user texts ARRET, they should receive a French confirmation message.However, with a single shortcode and what appears to be a single inbound processing pat

Hi, I have a Dispatcher filter rule to allow for DELETE method for a specific url path. It works fine on my local AEM instance Dispatcher. The same errors out “406 Not Acceptable”Can you please suggest a fix for the AEMaaCS environment?The following is how the rule looks in the sites_filters.any file./0123 { /type "allow" /method "DELETE" /url "/service/xyz.json” 

Hi everyone,I’ve been trying to build this project without much success. Here’s the command I used last:```mvn -B archetype:generate ^ -D archetypeGroupId=com.adobe.aem ^ -D archetypeArtifactId=aem-project-archetype ^ -D archetypeVersion=23 ^ -D aemVersion=6.5.0 ^ -D appTitle="My Site" ^ -D appId="mysite" ^ -D groupId="com.mysite" ^ -D frontendModule=general ^ -D includeExamples=y```I am on windows and I do use cmd with administrator privileges. I’ve tried numerous versions of the command above and I haven’t managed to get it running. Sometimes the build command fails, other times the `mvn clean install` or `mvn clean install -PautoInstallPackage` or `mvn clean install -PautoInstallSinglePackage` fails. And the times that both work and I can see the project in AEM it is still not functioning properly. For example I get an error when trying to create a page. My question is more general as I’m trying to understand how this all works. I have the AEM 6.5.0 version.From aem-project-archetyp