Adobe Analytics

Hi all,I have a summary panel in report consisting of 9 cards. Every card has its own description and numeric values. I have aligned all number values with consistent font sizes while designing the report. The alignment appears correct on my system after saving and downloading the report.However, when the same report is downloaded and viewed on other systems, the number sizes appear different, causing misalignment in the summary panel. As a result, the report looks inconsistent for different users.Could you please advise on why this happens and how can we ensure consistent number sizing and alignment across all systems? Thanks in advance.

Hello everyone,We recently noticed an issue with the Table Builder feature. When we apply filters to multiple dimensions, the filter only applies to the first dimension. Any dimension listed under the first one does not get filtered at all.This behavior seems new—previously, we were able to filter multiple dimensions at once without any problems, and the table would update correctly across all selected fields.Has anyone else experienced this? Is this a known bug?Any help or guidance would be greatly appreciated!

Classification rules are now available in classification sets.I created a new classification set and added a rule with a regex and I wonder if any of you can shed some light on the following observations.According to the status, my new rule was directly activated without me explicitly activating it. Even after deactivating and saving, it reverts back to active. Testing the new rule gives me error messages. First it says “You have unsaved changes to your rules. Please save your changes and try again.”, although I saved it and did not change anything. After clicking on “Save rules” (again) and clicking on “Test rule set” it unhelpfully says  “Failed to test ruleset. Please try again.”Are there known problems with saving/testing rules?

Post upgrading to the new report builder. One of the metrics got Qualified visits got removed from a few reports while it is visible in other reports. (very strange behavior).However, now when I want to bulk select those reports and replace that specific metric. I don’t see the option to do that.How can I do that ?

I have setup alert and i get email around 12:40 but my data is not settled by that time so usually alert I get are not useful. How I can fix this

If a unique visitor A came to the home page than to a product page. We will have +1 for the website unique visitors. However in the page breakdown, we will see +1 in home page unique visitor, but what about product page breakdown will we also see +1 or it will give 0?

Hello, I am Have kept collect user agent and client headers settings in datastream. Assuming this will collect device type information correctly forexample desktop vs mobile or tablet. However I do not see that.  I have more no-values and I believe the desktop is falling into this, not sure why or what additional settings needs to be done in either datastream or data view

ProblemAdobe Analytics Workspace currently allows link sharing for projects but not for Adobe or company templates. While projects themselves can be shared through links, templates can only be shared by manually saving a copy first or asking others to locate it within the template menu. This makes it hard to promote standardized reports or guide users toward the correct starting point.Templates are meant to make analysis easier, but without a simple method to point others to the right one, they often go unused. Proposed SolutionEnable templates to generate shareable, permission-aware URLs, similar to existing project links. Clicking the link should open the template directly or bring the user to it in the template gallery. BenefitsFaster Onboarding & TrainingTeams can send a direct link to the exact template a new user should start from.This reduces time spent navigating long template lists or hunting for the correct one.Improved Consistency & GovernanceOrganizations often rely

Hi, Can someone confirm how data is processed if a product ID is used twice in s.products in the same hit?If the s.products string contained something like this, with the same product ID used twice:hotel;24174;1;558;event199=558|event57=1;eVar4=hotel|..........,package;24174;1;2648;event199=1324|event57=1;eVar4=pauschalreise|….Would Analytics ignore the second instance of product ID 24174?  Background:We are currently evaluating a change regarding which ID to use as the product ID in s.products.In our industry, we have a kind of ID hierarchy: There is a general ID per product. Each product can have multiple distinct offers with offer IDs. Each general ID can be connected to 5 - 10 offer IDs.Until now, we use the offer IDs as product ID. This has one disadvantage for us: There are some pieces of information on the search results list which we can only track on that page type and that relate more to the product than the pdp. We use merchandising eVars for this so that the merchandising e

I am working on a server-side implementation of Adobe Target using the AEP Edge Network API and have a question around ECID capture on a user’s very first interaction.How does the ECID get generated and returned on the very first load in this setup?I’d appreciate clarification or references to official documentation or best practices for first-time identity establishment when using Adobe Target server-side with AEP Edge API.Thanks!

Hello,I’m troubleshooting an Adobe Analytics implementation for a mobile app using AEP Edge Network. Context: App sends screenView xdm.eventType = web.webpagedetails.pageViews Page name is mapped to _experience.analytics.session.web.webpagedetails.name pageViews.value = 1 eVar14 is populated in the same Analytics hit and represents the platform Web Platform Hit is successfully processed (droppedHit = false) In Workspace: Page Views are correctly reported eVar14 has values Web data behaves normally Issue:When I apply eVar14 as filter, this is the result:  This does not seem to be a mapping or timing issue, since both values exist in the same hit payload.Here is part of the mapping: My question:Could this behavior indicate that something is incorrect or missing in the Analytics mapping, even though both the Page View and the eVar are present in the same Analytics hit? I’m trying to understand why this breakdown does not work. Thanks in advance for any clarification or guida

Hi everyone, Noticing in our data that the majority of iOS data from Pinterest (identified with campaign codes) comes in with an unspecified referrer and referring domain in Adobe Analytics. Wondering if the team knows of any reason this might happen? Maybe something with the webviews in their native app, or is there some known redirect they perform. I know pinterest is a large ad platform so hoping someone else has insight on this issue.

I am trying to use the Excel based health dash as posted here by Adobe - https://new.express.adobe.com/webpage/y6DGOeWmpo7UhI am getting error message that the product maynot be supported by Adobe anymore. Any advice here to use this or a similar product to actively monitor the health of a report suite and all its props and evars is much appreciated.

Working with derived fields to calculate the time difference between users starting on page A and the time they took to start page B. Have setup a derived field that uses a case when statement to determine the timestamp when page A was reached and the same for page B. Below the when statement have used a type case statement to parse the time into DD-MM-YY hh:mm:ss time. This part works great. But when I define persistance within the component settings as “orginal” and “session” it returns serveral values, Where I’d expect it to only return the first instance of the timestamp. Thank you in advance 

Till last week when I select a cell or multiple cell am able to see date range and segment used for the selected cells.however since this week am not able to see this also refresh selected cell is not working. anyi dea how to solve this ?

Hi! In my company we have set up the marketing channels in the best way, but the results I see from workspace do not convince me and I think there are errors in the processing rules, but I do not know how to solve them. The main anomalies I see in the data are: The main anomalies I see in the data are:- 55% of the audience of the marketing channel "direct" is from Referrer Type "Search Engines", specifically the majority comes from Google.In the Processing Rules "direct" is my last rule, and above it are the rules for the "search" channels. I share the configuration of the rules: Here you can see the order of the rules:  Here the configuration of both "Search" channels:  "Direct" Marketing Channel: Why if we have specified in the "Search" rules to collect the data "Matches Natural Search Detection Rules" not all "Search" traffic is collected in the corresponding channels and falls into "Direct"?  Thank you!     

I created an automated report using the Excel Report Builder. It emails me at least weekly, if not more. I no longer want to use this report, but there’s no link in the email, and I’m not sure what happened to the original file. How do I stop this?

Hello all,  We have experienced a break in our data where a “N/A” value was getting captured in a dimension instead of the correct URL (domain and path only). We have another variable that captures the URL (included query string parameters). Since the original dimension is heavily used, we want to see if there are any solutions we can employ before updating all of our segments.  So as the title - are there any methods we can employ to update the N/A values on dimension X with breakdown of the dimensions with Y?

Can we create Marathon Dashboard using Reporting API 2.0?

Hi, I'm looking to use a custom metric and apply attribution settings to it, but the non-default attribution settings only work on metrics within the Data View. How do I create a metric within Data View that is counting distinct dimension values, so that I can apply non-default attribution settings within workspace? Right now, it seems like I can only count metrics at the event level (row count with the value) or Session or People. But for cases like application IDs where we want to attribute each instance of an app ID to an upstream touchpoint, I would need a distinct count metric. Thanks

Hello Community,Let me explain the scenario I am facing with Login Credentials of adobe.Previously we had company email name as "shortid@company.com" and I had my Adobe Analytics login with the same. After that due to our company policy our email id has been changed to "firstname.lastname@company.com" and this marked as FEDERATED ID. A new ID in adobe is being created for me with "firstname.lastname@company.com" - so now I have two IDs in Adobe. My old ID (shortid@company.com) was having only one application and that is Adobe Analytics and new ID (firstname.lastname@company.com) was having for applications (Data Collection,Software Distribution, System Status and Workfront). I am a Web Data Analyst in the organization and I was using "shortid@company.com" as my login credential to access Adobe Analytics. Now an admin right user of our company account in adobe converted my Adobe Analytics ID to FEDERATED ID to enable SSO Login.As a reason whenever I am trying to use

Hello! Can someone please explain to me in layman's terms what repeating instances & non-repeating instances are? 

Hi Community, Do we know what will happen when classification rule build gets deprecated? our team is looking to get some insights on what we should do to prepare for this as most of our classification is being populated using rule builders. Thank you in advance!