Product Communities

Greetings! I'm a newbie with Fusion and I just built my first successful scenario! WOOHOO! But, what I need is to build a webhook or event to listen for the scenario and run when an Issue's Status changes to "Ready for Fusion". Can someone help me create that? I'm not sure where to start. Thank You! Deb 

We have a requirement to use the adobe dam dynamic assets in our application which is hosted externally.I'm checking integrating of  Micro-Frontend Asset Selector with localhost. I like to know if it possible to raise a support ticket with localhost as domain for providing with imsClientId, imsScope, and a redirectUrl for the integration.I'm new to adobe assets so please elaborate your answers. Thanks in advance.

Hi everyone, When uploading a CSV file using the Map CSV to XDM schema option in Workflows, I included additional data of a empty columns to complement an existing record in the dataset. However, instead of updating the specified fields, a new record was created. Why does this happen, and is there a specific configuration I might be missing to ensure records are updated rather than duplicated? Regards,Diego P.

Hello, This is not only about Target but experience league documentation in general but what a better place to ask than the optimization community! Maybe someone can notice pro-activity and invite me to gigs = ) I happen to read the docs at 200% ('command' + '+', six times) especially to look a graph or visual.I would find useful if there was a one click toggle for 2x view for that and then click it to go back to 100% (maybe other %?) and see the sidebars. Screenshots attached. *Right before posting played with the two arrows that open the view (I used them before but not for the full view) but decided to still post as the 2x option is one click toggle vs the 2 arrows, also perhaps the '2x' or '200%' CTA could be more intuitive than the arrows, which for some reason I did not click to go 2x view-ish mode initially. Thanks, Rafael Sahagun    

Hi - my company leverages some great internal AI summary assistants and I wanted to get an export of the 'All (read-only)' transcript in the Updates section on projects? Is that possible? If it is, is it possible to also get that data for all projects within a portfolio within a specific time range? i.e. in the last week Thank you!

In my team's workspace, we have projects that have tasks that require multiple approvals. Is there a way to report on Task Approvals at the approver level? I was able to build a report for Task Approvals, however, its only at the overall approval level. I'd like to build a report that breaks it down even further to track each approver.  In other words, in a task that has multiple required approvals - I want to be able to see the approval status for each approver so that I can see- at a glance- who has approved or not approved.

Hi everyone,  We're looking into implementing BIMI, but there are a few questions and concerns regarding the process. I'd love to hear your thoughts or experiences.  1. Our IT team mentioned that either SPF or DKIM needs to align with the domain in the "From" header for BIMI to work, especially with Gmail enforcing this for bulk senders. My understanding is that DMARC alignment could be a requirement too. Has anyone dealt with this?  2. There's some concern about using a branded domain as primary domain, specifically around brand reputation and complexity. From what I've read, it's generally not recommended. Thoughts? Can anyone provide additional information? 3. From what I've gathered, Marketo doesn't support BIMI out of the box, but it's possible to configure (with an additional cost). If you've implemented BIMI through Marketo, was it worth the effort? Did you see any noticeable difference?  I'm trying to get a sense of whether the ROI i

I'm working on an AEM 6.5 server that was migrated from an earlier version. Some of the steps were not strictly followed, however - I don't know the full story but I'm guessing there were actual regression problems or just no practical way to test. One example of this is when I go to Tools > General > Tagging, the root path is not what I would expect. Note the URL has a suffix pointing at the pre-migration path  -  /libs/cq/tagging/gui/content/tags.html/etc/tags.Where is this root path set?  I'd assume that the deployment is setting this, but I can't find anything that looks like it is overriding the v6.5 default of /content/cq:tags.

Hi,I noticed Marketo has GET/POST endpoint to get access token, but both endpoints  accepting query parameters only, Is there any reason?<URL>/identity/oauth/token?client_id=<Client Id>&client_secret=<Client Secret>&grant_type=client_credentials clientid and secret are exposed to internet when pass them as query parameters, is there any better approach to prevent from exposing clientid and secret? Thanks,Babu

I understand there is a way to merge columns and add line breaks, but wondering if there is a way to replace commas with a line break to separate multiple values in a column in a report. I have a user report showing the "Other Group" field in a column. There are multiple values in the field/column separated by commas. I'd like to separate by line break. Thanks in advance.

Hi everyone, When trying to create an audience in Experience Platform, only the Batch type is allowed, but not Streaming or Edge. Why would this happen? Regards,Diego P.

Our internal creative team currently receives requests via our WF intake request form, develops a project estimate outside WF (in Word), and emails the estimate to the requestor for approval.  We don’t begin work or convert the request to a project until the requestor has approved the cost estimate and timeline via email.  I want to develop the project estimate and get approval completely in WF.     As a WF administrator and Operations team member, I want to be able to develop and share with a requestor, who is on a contributor license type, an estimate consisting of the following info AND get their approval for the estimate:Project title (pulled from field in request)POC/requestor name (pulled from the field in request)Timeline (pulled from project template fields)Total estimated cost of project labor (not per task)Creative staff assigned, their tasks/roles, and their hoursSOW (project description field edited from intake)A prepopulated disclaimer field w

Hi Adobe Community,I was in the process of taking my Adobe certification exam when my link unexpectedly broke. I was immediately redirected to a survey page, and I couldn’t return to the exam session. After checking my status, I saw it now shows as "missed." I’ve sent an email to adobe.psisupport, but no initiative has been taken yet. I also contacted Examity, and they replied that it’s not in their hands to resolve this issue.I’m unsure how to proceed from here and would appreciate any guidance. Has anyone faced a similar issue, or does someone know the next steps to reschedule or resolve this? I’ve put a lot of effort into preparing for this certification, so I hope there’s a way to sort this out soon.

I am running a scenario that copies a set of Template Tasks over to a project after it's initial creation, but the last task of the Template Tasks I am copying over is excluded as I only need that task once in the project. Currently after flipping my project I am left with that has that "end/last" task, but it lands earlier in the timeline than it should (due to the original project conversion and subsequent Template Tasks being added later in the scenario).Is there a way to target an individual task on a project and then set that task as the last task in the project?Any help is greatly appreciated!  Thank you,Eric

Hi, Recently I have implemented a new property using the Web SDK. It isn't the first Web SDK property I have implemented for the site, so mainly I have copied the work I did before for other properties. For my last implementation, I can see that eventhough the default 'Page' dimension is set correctly on Adobe Data Collection I can't see the dimension being sent on the Edge server call and when checking on Adobe Analytics Workspace I can see it gets populated with the value 'Other'. It didn't happened with previous implementations. My last implementation sets on a different domain, which differs from the previous ones, but both share the same Adobe Analytics report suite. I haven't added yet the new domain on the internal URL's filter section and I think the issue might be related to it according to the information I have read on this page.  Can you confirm if the issue is related to not have added the new domain to the internal URL´s filters as I suspect?&nbsp

I'm in the process of designing a Technical Specification Document (TSD) and when i checked couple of websites as a referenceI don't see "Page URL" in their data layer, how ever on network calls I'm able to see, the URL is getting passed and mapped to a defined, dedicated variablehow it is possible? meanwhile can i include pageURL in my data layer structure ?digitalData.page.pageInfo.pageURLis this fine? Please help to let me know Thanks & Regards,

Hi Community, How to create dynamic content for compatibility mode for visual fragments that are able to select conditional content blocks in compatibility mode?Select a conditional content block to edit its settings@anuhya-y  @davidkangni @satheeskannak @mohan_dugganab  

Hi,There is a scenario where we need to hide a particular tab from the header component. So, I just selected the tab and clicked on "hide in navigation" check box under properties and also cleared the cache for a particular page. But still that tab is visible.Any inputs on this... Thanks,Shreyas.

Hi @parthasarathy I have a scenario where a recipient has opened a single delivery multiple times, and I need to fetch only the top records for each recipient. For example:Recipient | Date1 | 12/282 | 12/273 | 12/26I need to retrieve only the first two records for each recipient. I am trying to use the Split activity in Adobe Campaign Classic, but I am unable to achieve the desired results. Could you please help mewith this using split activity only, as I am trying to understand how split activity work?

Hey everyone, I'm trying to add an image Id in the HTML for an email to show that image. The image is stored in "Assets" in "Content Management" but I can't seem to get the Id from there.Does anyone know how to get it done? How my HTML in the email looks like where I need the image Id:data-medialibrary-id="urn:aaid:aem:xxx-xxx-xxx-xxx-xxx" Best regards,Mikael

Hi,I downloaded aem-sample-we-retail-master code from GitHub, and I got below errors while trying to build using command mvn clean install -PautoInstallPackage. Any help to solve this build issue kindly suggest    

Hello everyone , I want to upload a excel file from author environment to asset. AssetManager is depricated in aemaacs. Documentation saying to use http api from external application not from same JVM. Here is the sentence mentioned in documentation.https://experienceleague.adobe.com/en/docs/experience-manager-cloud-service/content/assets/admin/developer-reference-material-apis#asset-upload:~:text=Execute%20these%20steps%20in%20an%20external%20application%20and%20not%20within%20the%20Experience%20Manager%20JVM.Is it mandatory or only suggestion? Thanks in advance.

Hi,I want to create a new delivery category for my delivery.How do I do that?

HiI am trying to write a post service in aem to which i am sending data in the request body.To read the data, i have a sling Post servlet where i am expecting to get the data sent by post via request.getReader().To test this post servlet, i have created another servlet in the same instance which has a doGet() and the following code:I am hitting this servlet's path in my instance to execute the following code.CloseableHttpClient httpClient = HttpClients.createDefault();HttpPost postRequest = new HttpPost("http://localhost:4502/bin/testingPost"); //the post servlet's pathStringEntity input = new StringEntity("<Comment>hello</Comment>");input.setContentType("text/xml");postRequest.setEntity(input);HttpResponse httpResponse = httpClient.execute(postRequest);However, i get a 401 in httpResponse while trying to access the post servlet with the path "http://localhost:4502/bin/testingPost".I have referred a few forums where they have mentioned about removing post from Apache Sling

Hi everyone,I'm having trouble with the AEM installation. I follow the process of creating the two folders author and publish and renaming their installers. When I click normally, nothing happens, it creates the folder but it's empty. However, when I run it through the cmd, it seems to follow the installation, creates the same folder but this time with content, asks me to create a password and repeat it, then just that, it doesn't open a window as it should in the manuals, if I enter the localhost on the port it doesn't find it. Does anyone know what I can do? My Java version is 21.Thanks! =D