Product Communities

when clicking 'sign in' in plugin top right, the sign in pop up appears, briefly spins and disappears. sign in fails.

Hi! I'm trying to sign in into the Abode Debugger Chrome extension, and after I enter my login and password it acts like it signing me in, but the extension is still logged off. I already cleared cache of my browser and reinstalled the extension but the result is the same. Is there anything else I can do to sign in?  

I'm logged in to AEP and Data Collection with my Adobe ID.  When I click Sign In on the Debugger (Chrome), a log in screen pops up, autocompletes, and closes.  Then I'm still not logged in.

When I try to sign in to the Adobe Experience Platform Debugger Tool Extension For Adobe Experience Platform Launch, it won't let me sign in. It just loads, then says 'signing in', then disappears again, and I'm not signed in (it does this quite a lot). However, I am able to sign in to Analytics, Launch, etc. Does anyone else get this problem a lot with the Debugger Extension, and are there any tips to stop it happening?

I am not able to sign in AEP Debugger Sign in Not working. this started happening from last 3-4 days.

We're trying to set up a subdomain to use with Campaign. We can't delegate the whole domain via nameserver, so we have to go the CNAME route. Adobe's instructions ask us to set up a CNAME record pointing testdomain.companyname.com to Adobe while ALSO setting up subdomains below that record pointing to Adobe via CNAME. According to our IT department, this is impossible in their DNS system. You can't have subdomains of a record that is itself a CNAME record. Only a zone record can have subdomains. Has anyone ever setup Campaign this way successfully?  If so, how did you get around this restriction? In the example below the CNAME record for 'testdomain.companyname.com.' is what we can't setup, due to it needing to be a zone record to setup the m1, t1, res1 and domainkey records below it.  Name Type Valuet1.testdomain.companyname.com.CNAMEt1.testdomain.companyname.com.cname.campaign.adobe.com.m1.testdomain.companyname.com.CNAMEm1.testdomain.companyna

We recently migrated to v8 from ACC v7. We have observed many times that when we create an email delivery the mirror page doesn't load when we try to view the same from the delivery object. However when we send out the email and click the mirror page in the email it loads properly. This is not consistent but works some time in delivery object. It looks like the mirror page is getting calculated incorrectly as I see always one mid-source URL (ex: m19) however in the email it is other one (ex: m20). When both are same (ie. m19) then it works in delivery object too.  How can this be corrected? Is there a way to assign right mid-source URL to the mirror page? Thanks in advance!

Secure, Scalable Omnichannel Engagement - For the Most Demanding Industries Register Here: Secure, Scalable Omnichannel Engagement—For the Most Demanding Industries    About the Session: With rising expectations for seamless, relevant, and personalized experiences across channels, it’s never been more important for organizations to deliver on the promise of truly omnichannel engagement. But for industries navigating strict compliance requirements—like healthcare, financial services, and government—meeting these expectations can feel like a balancing act between innovation and regulation.Join this session to learn how Adobe helps organizations move from fragmented communication strategies to scalable customer experience orchestration—securely, effectively, and with compliance in mind. Whether you're in a regulated industry or managing your own governance challenges, you'll gain insights to help deliver connected, compliant customer journeys.Key Takeaways: How to transit

Hi All,I am working on creation of some typology rule , initially i can see some by default typology rules (marked as Bold) in v8 instance but their should be more by default typology rule  like i need by default typology rules for twitter(Direct tweet message size approval) or Typology rule for enhanced MTA or any other . How i can get all these default typology rules to my instance.Thanks

Image credits: Adobe Firefly   In the last two posts, we explored how to identify prediction opportunities that align with your business goals and discussed the steps to build those predictions using Adobe Real-time CDP Customer AI. Now, let’s dive deeper into the process of translating a prediction goal into a fully functional Customer AI predictions which can be used to build intelligent audiences right away!   When working with Adobe Real-time CDP Customer AI, it’s essential to know how to interpret the metrics and results to make strategic decisions. Here's a simple breakdown of key metrics and charts, explained with analogies to make them easier to grasp.    1. Trusting the Prediction Quality Using AUC    What is AUC?  The AUC, or Area Under the Curve, measures how well your model can distinguish between likely responders (customers who will take action) and non-responders. The closer the AUC score is to 1.0, the better the model is at separatin

Hi Team,When building segments that require "Recent visit within X days" or "Action taken more than Y times in last week" how can we balance using rule-based traits vs relying on onboarded signals or external data processing?

Hi, do I need a free trial of AJO to complete the course above? I'm in module 1 "Getting Started" and there is no simulation to activate for the lab exercise. Please advise?

I feel silly having to ask this because I've asked a very similar question (thank you @kurt_jones and @rafal_bainie!). How do I turn the URL field on a task into a hyperlink in my project view? I would assume the API value is task:URL?The solution on my last question was:displayname=Dropbox link.url=customDataLabelsAsString(Dropbox link) valueexpression=IF(ISBLANK({DE:Dropbox link}),"","Link") valueformat=HTMLWhat I'm looking for now must be in the ballpark of:displayname=URL link.URL=task:URL valueexpression=IF(ISBLANK({task:URL}),"","Link") valueformat=HTML ... What am I missing?

Hi All,Has anyone ever attempted to attach a document thumbnail of a document on an issues report?

I have a workflow with multiple queries for counts and I would like to export all of these to one CSV.All I need to have is the name of each query and it's associated count.Step by step guide please as still fairly new to this.Thank you. 

Hi Adobe Community,I’m currently running tests on the new Journey Entry Capping functionality in Adobe Journey Optimizer (AJO) and have a question related to journeys triggered by a Read Audience.In my setup, a profile enters the journey and eventually exits through one of the designated end nodes. What I’m trying to achieve is for that same profile to re-enter the journey at a later time either after being removed from the audience or after some condition changes.Here’s what I’ve tried so far:Once the profile exits the journey, I remove it from the audience.Later, I reinsert the same profile into the audience (e.g., via a query or attribute update).However, the profile does not re-enter the journey.I’m wondering:Are there any known conditions or limitations that prevent re-entry into a journey triggered by a Read Audience? I’ve respected the “Allow re-entrance after” setting in the journey configuration  it’s currently set to 5 minutes, as is the default behavior.Is there a speci

What are questions you put in your "Help Support" section. Some items I have thought about are below: ReportingView/Layout/Menu/FilterFormGroup/TeamTechnical Issues Any other recommendations?

Hi, I have a requirement to open the QB endpoint so that a third-party service can use the JSON output. Besides adding a filter specific to the query, is there anything else that would be recommended to add to Dispatcher config?Currently, I have something like this:/0100 { /type "allow" /method "GET" /url "/bin/querybuilder.json" /extension "json" /query "regex specific to query here" }

We are thrilled to announce applications are now open for 2025-2026 Adobe Experience Platform. Adobe Champions represent an elite group of our most advanced users and brand ambassadors for these fundamental Experience Cloud products. Each year, a cohort of expert practitioners from around the globe submit applications to be selected to participate in the Champion Program. The individuals chosen are provided with opportunities to share their expertise, exchange best practices and learn from fellow product experts, and interact with Adobe product teams and leaders. Program ObjectivesDevelop deep connections with our most knowledgeable customers and partners to be our “voice” within Adobe’s customer communityActivate Champions for feedback, exclusive thought leadership and speaking opportunities, customer references, and to help drive product adoptionDrive customer advocacy and evangelism of Adobe Experience Platform products and the Adobe brand Apply now to become an Adobe

I am not able to change html for embed component with has supertype of embed/v1/embed core component. I am able to change diaog , model , design dialog , but not able to change the html of the component. Please provide a solution why my html changes are not taking place. I am trying to change context from html to js for the component by modifying the HTL.

Hi All, Version: AEM 6.5 SP 19 On prem hosted on Amazon AWS ec2 serverJDK: 11.0.27OS: OEL 8.10 (recently migrated from CentOS 7)Issue: When an user is trying to upload images in DAM (generally jpg/png) it shows Upload failed. This happens randomly, after multiple retries it finally uploads the image. Image size also are not very big its in KB only. Analysis: We had gone through the error.log and workflow specific log during that time period and see no errors or exceptions logged in AEM author instance. Also one keynote is, this issue is being noticed only after recent OS migration. CPU utilization also is around 37% and never got any notifications for high memory or CPU during that time period. Can anyone help us on what could be the potential issue, or any pointers as to where we need to look for the Root cause?@arunpatidar @veenavikraman 

For example in a column for a late task report I'm showing the task successor as a valueexpression.  displayname=Next Tasklistdelimiter=<br><hr>listmethod=nested(successors).liststextmode=truetype=iteratevalueexpression=CONCAT('Task: ',{successor}.{name},' // Task#: ',{successor}.{taskNumber},' //Due Date: ',{successor}.{plannedCompletionDate},' //Task Owner: ',{successor}.{assignedTo}.{name},' //Task Constraint: ',{successor}.{taskConstraint})valueformat=HTML This results in the following: Task: Test late Task 4 // Task#: 4 //Start Date: 2/8/24 //Due Date: 2/14/24 //Task Owner: Stephen Jonas //Task Constraint: FIXTTask: Test late Task // Task#: 6 //Start Date: 2/1/24 //Due Date: 2/1/24 //Task Owner: Stephen Jonas //Task Constraint: MSO What Id like to see is something like this. I know I can remove the // but they're currently used to break the content apart.Task: Test late Task 4 Task#: 4 Start Date: 2/8/24 Due Date: 2/14/

I'm getting an error on the setup tab when setting up the Workfront for Jira app. Any suggestions on how to fix this? I haven't found anything elsewhere.