Product Communities

Hello,When I make a bar chart and I want to compare 2 days split in hours it is not possible to get more than 19 items. I need to seet 24 items for 24 hours in a day. In the visualization settings, there is a limitation for the step "Limit Max Items". Would it be possible to increase this limitation ?Thank you.

It would be extremely useful if we could have an option to add sparklines to tables containing metrics.  See the below example.  This would enable users to:1. Create workspaces with less tables and visualizations.  Allowing for faster and more efficient workspaces.2. Analyze data faster.3. Isolate where we need to dig further faster.4. Reduce dependency on report builder for similar purposes.See below for an example.  Let me know your thoughts.

In Analysis Workspace, provide a new table type called “Details Table”.  I would think this would be on the level of Freeform Table.  From there dimensions and metrics can only be applied across the top It would treat everything at the Hit level.  Dimensions that are Visitor/People level would align automatically to the left, Visit level would be to the right of Visitor/People and Hit level dimensions and metrics would always be right most.Hits would be sorted and grouped by Visitor, Visit and Hit in chronological order.  There should be some type of shading to show the groupings.Any Visitor or Visit level values would repeat itself for each Hit in their respective Visitor or Visit grouping (note that Data Workbench does not repeat the value for each Hit but I think it should to make it easier to create Pivot Tables after exporting to Excel).Allow up to ten dimensions/metric combinations.  Any dimension or metric could be applied.  It would be great if the

I have an abandonment fallout path I need to create where visitors start Checkout Start>go to any page(s) BUT Thank You>start Checkout Start again>then Thank You page.  The trick is that I can't just put the Checkout start twice because there needs to be at least one page in between them (rather than a reload).Rather than create a sequential segment and drop into the checkpoint, it would be great to be able to have a condition of NOT as a stand alone in addition to Eventual Path and Next Hit.  That way we could create Checkout Start>NOT-Thank You>Checkout Start>Thank YouAlso it would be great to have a Next Visit condition as well.  It would have to be available only if the Visitor option is selected.  An example would be Checkout Start>NOT-Thank You>Next Visit-Checkout Start>Thank YouIt's certainly different than the NOT condition, but would be useful for helping to understand multi-visit situations.

Right now, Reloads metric is available only for the Pages Dimension in Adobe Report Builder. If we need to see the Reloads for overall site, we need to use Page Dimension to sub-total it based on the ganurlarity which is tough to build the auto dashboards. Have created a calculated metric PageViews without Reloads (Page Views - Reloads) and automate it using Report Builder, but the option is not available in Site Metrics(Available in Adhoc Analysis). It will be great if we can add Reloads to the Site Metrics.

Adobe Mobile Marketing Services has great two-metric donuts under "Usage -> Technology". Can we please have thsi grpah type in Workspace, too? It is so useful to break down a donut graph further.

It would be useful to be able to have the option to see ranking maintained when applying a filter or segment to a report. With so many pages, we have to do a Data Warehouse export to Excel to be able to search for a page and see how it ranks.

Based on the way we use to have reports, we need to add elements to the workspace with different settings from those Adobe chose.That simple change takes so long time at the end of day... and makes us hysteric!!Could you make possible decide if those settings have to be:- as Adobe decided- as Current user decided- as last selectionWhat settings? All you have in "column settings":- anomalies- background- ...But also in charts, and general settings (compact layout, ...).Thanks

It would be very efficient to be able to use a bar chart with a line in it to show more data.For example, I could use the bar to show numbers and the line for percentual growth, i.e. to show visits and revenue with conversion rate, as shown below.https://searchengineland.com/figz/wp-content/seloads/2013/06/column-line-combination-chart.jpg

Let's face it - bots are getting smarter. Bot Filtering needs to get smarter too. Bots are getting better at changing user-agents, IP addresses, domains and more in between visits. Bots are now even adding delays between page views to look more like a normal visitor. And don't forget, they're running JavaScript too. Adobe needs to expand Bot Filtering to use look-alike modelling to discover visits with abnormally high page views.Similar to this Idea: http://ideas.omniture.com/t5/Idea-Exchange-for-Adobe/IAB-Bot-List-Segment-in-Analytics/idi -p/11708    we need a way to be able to apply 'Bot Segments' to reports so we can better understand what traffic changes will result prior to committing them as rules. Right now the industry is losing too much accuracy in our data to rely solely on a black box of IP and user-agent based filtering.

When utilizing freeform tables in Analysis Workspace, it's very easy to accidentally drag a dimension like "Day" into the column space when I meant to drag it in as a row. Depending on the setup, this can create many, many dynamic columns, to the point where data is no longer visible, Adobe slows while retrieving a large matrix of data, and Chrome slows to a grinding halt attempting to render everything. The only option at that point is to destroy the entire table and start over, since you can't even get your mouse in to click and select the columns to delete.Could Workspace instead prompt the user if the number of columns created is over some reasonable amount (like 30) verifying that they are sure, before rendering the dynamic columns?

Right now in Workspace, the range of the scale for the line & bar charts is set by the tool automatically and is based on the data set being presented.  While most of the time this is fine however when it comes to supporting metrics that have high occurrences of major outliers (like page load time) or high amount of volatility , the scale can get 'messed up' if a single outlier data point comes in.  it would be preferred if we were able to 'overwrite' the automatic scale to whatever range we as business analyst feel would be best for our purposes.  In the event that we set a scale and outlier data point comes in the 'normal trend' doesn't get obscured for by a single point.  this applies a lot to the minute and hour charts as daily averages seems to be more normalized than micro time period data points.this would help my organization a lot because we regularly do nightly code releases that can momentarily impact the performance of the user experience

If you have a Workspace project that uses the same segment/dimension in multiple dropdown areas or within visualizations itself (i.e. Columns in a Freeform table), it would be cool if you could choose to manually "link" them such that if you change one, any "linked" versions of that would also change.For example, let's say that you have many visualizations in a project and you have chosen to filter based upon Page = Home via a dimension. Now you want to change the focus page from Home Page to Cart Page. Today, unless you are able to use the dropdown area at the top for all items (which is not always possible), you have to manually change all of the individual cases where you have segmented/filtered by Page = Home.It would be great if when building the tables, you could check a box to link the segment/filter to a master one such that changing that one changes all linked ones. This is similar to setting a cell equal to another cell in MS Excel to make the two dynamic.

As a digital analyst I would like to create a rich dashboard in Analysis Workspace and share this with both Technical and non-Technical users. However, I don't want them to save their changes over my project. I would like a way to disable the Save button and force them to save their changes as a new project. This is the same behavior that is already available in OOTB ACS Reports.

This is a suggestion to incorporate a feature that would auto-detect the implications of a new custom bot rule prior to saving the rule.  The thought would be to have the tool function similarly to the current segment previewer that runs a check on historical data to detect what percentage of the population would be included in the segment.  I suspect a similar check could be run to determine if a bot rule is too broad in definition, etc.  Such a tool would help clients avoid expansive definitions that might be costly in nature and/or negatively affect legitimate traffic.

Hi Team,Adobe Analytics answer what has happened or what is happening. Could we have forecasting feature in Analytic which can answer the question: what will happen? For e.g. Predicting what would be sales 1 or 2 or "X"  periods down the lane. We can build models from already available data in Analytics like recency (days since last visit), frequency (number of times visited) and monetary value (revenue).

I would like the ability to write calculated metrics. This is for two reasons:I'm used to writing long formulas, nesting conditions and operators. I'll brave a sweeping statement that most analysts are famiiliar with this tooThe UI for the calculated metric builder is not space efficient at all. As soon as your calculated metric definition goes below the fold of your screen, it becomes very hard to managePerhaps the requirement for #1 can be resolved by simply improving the UI as mentioned in #2, however, I'd still like the ability to write formulas out. I see it working like:Start typing name of metric e.g. "uniq"UI predicts "Unique Visitors", and maybe some dimensions, segments, time ranges and other metricsI hit tab to select the top resultI can type an operator (-+/*)I can simply type a fixed numberI can navigate within the formula bar using arrow keys to wrap items in parentheses / brackets as neededSome method to wrap items within a segmentBelow is an example of not the most extr

Hello,I really appreciate that the display of column titles in tables has improved. But one small issue regarding titles is still bothering me. For example in the visualization of Summary Change and Summary Number, if the title is long, only a tiny part of the title is shown (as you can see in the picture below). Mouse over is not the best solution since this would work when in Workspace but not when you export as PDF-file. I'd like to suggest a line break in case of long titles. It doesn't have to show the complete title but a wider limit would be extremely helpful. Thank you.

Copy, Re-order the entire drop zone (or parts of it) between panels in the same workspace project.

Would love to see an improved variable change log incorporated within the Report Suites area of Admin Console (Conversion Variables, Success Events, Processing Rule, Traffic Variables, etc).   I could see this as an additional expanded menu that shows changes for that specific variable and the date.  This would help with quickly debugging issues and keeping a record of changing that can have a large impact on your data.  The Admin Tools Log is not exactly what I want to be sifting through when I am double checking a change seen in a particlar variable and need to get a better understanding of potential changes on this variable's settings. 

I am not sure how this is not in the ReportBuilder tool, but having the ability to sort the metrics both ascending and descending is a pretty import (and basic) feature of any data reporting tool.  I would like to propose a simple fix for this.  Add the ability in the request to click the little down arrow which will toggle the sort order from descending to ascending so that we can bring back top and bottom data.  Right now, I have no way to bring back the top 20 pages with the lowest bounce rates... that seems like a pretty basic report.Please make this a reality Ben Gaines.... You shunned my request for the name change back to Omniture   Hook me up with this please!Thanks!-Jason

I have an ecommerce site with millions of products. Our product variable typically hits low traffic halfway through the month and sometimes earlier if when we get hit by bot traffic on higher funnel pages.It would be great if you could tweak the low-traffic logic to give preferential treatment to a product variable value if it exists within an order. An order should automatically trigger the removal from low-traffic - even if purchased only once.

Currently our optout.html page (https://smetrics.solarwinds.com/optout.html​) has mixed content on it (http and https).  example: the <img src="http://assets.omniture.com/en/images/skins/default/transformation/002251.global.logo.oms-mark.152x63.png" width="152" height="63" border="0"> is http and not https.  In an effort to become GDPR compliant we need to ensure our visitors have the option to opt-out from being tracked by Adobe Analytics.  The resulting optout.html page needs to be https as the rest of our site is https.  We would like the optout.http page to be 100% https if possible, or for an option to go either way.  Thanks,Damon

Does anybody know if it's possible to select the number of rows you want when you make a breakdown in Workspace? For example, I have 400 rows from a prop and I need to breakdown using another one, but I need 25 rows for every item (from the 400 rows). By default it's five, I think. It's really annoying to do do it one by one.Any advice?Thank you so much

I know there is a Refresh Project option, but a Refresh Panel would be a useful addition. Sometimes when I change something in a panel, it produces an error for that panel, i.e. it doesn't update. When I hit Refresh Project, it pulls in the data, but it also updates panels that I do not want updated since I haven't made any changes.