Product Communities

Hi allWe have created a fusion scenario from a request queue.  Fusion creates a project, then deletes the request.  The notification that follows has a link to the request that no longer exists.  Is it possible to point the link to the project instead?   Any recommendations will be appreciated. 

My team and I want to create two activities that use the same mbox but we will add different audiences to each activity. Will this escenario be possible? I ask this because we ant to test two different banners from our mobile app but they share the same JSON, we cannot divide the two of them so when we test them, we do both at the same time in the same activity and audience but we want to try to test them separately. One of our main concerns is that if we do the two activities, the reports will bring no information due to collisions but we are not sure. Both of the tests will be A/B manual. Thanks in advance.

Created the below content fragment json.{"jcr:primaryType": "cq:ContentFragment","jcr:content": {"jcr:primaryType": "nt:unstructured","title": "My Test Content Fragment","description": "This is a test content fragment for JUnit.","elements": {"jcr:primaryType": "nt:unstructured","headline": {"jcr:primaryType": "nt:unstructured","value": "Test Headline"},"body": {"jcr:primaryType": "nt:unstructured","value": "<p>This is the body text of the content fragment.</p>"}}}}

Hi, I am planning to do a change in the Adobe Analytics classification functionality. The tool is currently classifying the campaign traffic using the classification importer and I would like to switch to the classification rule builder. I have built the new classificacion rule builder rules in the development report suite and they are working ok. We have decided to use new names and add some more conversion classification dimensions. I think I am now ready to apply the new rules to the production report suite but I would like to have confirmation on some points I am not completely sure about: The team used to import the classification under specific conversion classification dimensions that will be deprecated. This imports apply to only to the production report suite. They no longer would like to use these values because they think they are not accurate. Do you recommend to remove the previous imports so I can start classifying from scratch?I will be modifying names and

Hi Everyone,I'm new to Adobe Target. I have few questions.1. I have created few profile scripts. But it shows on inactive status. Can I know how to activate the scripts?2. I need to test a personalization which targeted to an ad campaign. I'm bit confuse on how to test this. Any thoughts on testing this. Thanks in advance!

Have you implemented using one tag multiple websites which use different technologia - SPA and MPA? What should I look at or be careful with?

Hi I am trying to add more heading option for paragraph format in content fragment. Does anyone have any ideas about this?

Hello, We have been migrating from at.js to WEBSDK for some time now, and even though we have reviewed the events, they are not being ingested correctly into Adobe Experience Platform. We have everything configured, both the extension and configuration of the WEBSDK tag in Tealium, as well as the configuration of the datastreamID. The target experiences are also displayed on the website, but since the data is not ingested into CDP-AEP in CJA, nothing appears, because both the events from our main XDM and those from the “adobe_target_classification_events” schema-dataset are missing, which match using the correlationID. In the logs, we have seen that it fails because an object from the schema is missing in the decisioning.propositionDisplay event, but we do not know how to add the XDM of the missing object. However, we also do not know how they are ingested into the “adobe_target_classification_events” dataset. Has anyone already performed this migration and can help us?

I know:- streaming API- kafka - azure events - Amazon Kinsesis Is it anything else?

Hello, Adobe Experience Platform debugger says "Not found" and doesn't work.I've used this account and website recently, so it doesn't seem to be a permission issue. What should I do in this case?  

Hello, We have set a Marketo communication limit of 1 email/day. I scheduled an email for an audience on Wednesday, August 6, 2024, at 8 AM PDT which was sent out successfully. However, the same audience is also part of a nurture program where they receive an email every Thursday i.e today at 10 AM in their respective time zones. It appears that there was an overlap, and the nurture email for Thursday wasn't sent out as expected. Could you please let me know why this occurred? And please advise on corrective steps we can take.

Hey Workfront Community,   Hope everyone is doing well. I wanted to share a quick update with you all. Our team has undergone some changes in the past few months which affect our roles and responsibilities. Moving forward, Kautuk Sahni (@kautuk_sahni) will take over as the Community Manager for the Workfront Community. Kautuk comes with over a decade of Community Management experience under his belt and is well-suited for this role. You may have already seen his username on the Workfront Community or on our solution community board for AEM. I’m confident in his ability to take the reins and will also be a standby resource over the next few months.   Moving forward, I’ll still be on the Community team and will continue to manage the Marketo Engage Community. It has been an extreme pleasure working with you all and quite bittersweet that I'll be stepping away from this role, but know that you're in good hands. As always, please don't hesitate to reach out to me via direct

My last post showed how to embed “View as Web Page” (VAWP) as a preview on a fully branded “Forward to Friend” (F2F) page, like so: Now, let’s learn how to turn a standard Marketo form into a F2F form so we don’t have to use the — let’s face it — pretty ugly popup that comes with the usual F2F link. You know, this one:   The F2F endpoint is just an alternate form listener The F2F form, like any HTML form, posts to a form listener (that is, HTTP service that expects application/x-www-form-urlencoded payloads). It’s not the same listener used by Forms 2.0 forms, but even simpler. It just expects a GET request with 4 fields: fname (first name) lname (last name) emailAddress (email address) mkt_tok (the mkt_tok value that identifies the email to forward and from whom)   You can hit the F2F listener from a webhook and it’s exactly the same as if an end user filled out the form. (You probably just had a lightbulb moment!)   Set up a field for the mkt_tok The mkt_tok is a

Hi,We use a field on a custom form to create a link between projects & salesforce, it generally works well. But from time to time a sales person will enter the same opportunity code into multiple projects, usually because an earlier project used a particular opportunity and that project was wrapped up so they want another go at it.. We do not want this. So i would like to run a Workfront report looking for when their are duplicates in this particular custom field/form. Any ideas how i could do this? Currently i am running a report on all the values in this custom field and viewing all opportunity reference codes in Excel and looking for duplicates but this is not very effective. Is their a way for Workfront to identify duplicates in reports? Maybe as a filter?Thank You

Hi team,I am running a JCR SQL2 query to fetch all sling:Folder nodes under a specific path in AEM, but it’s returning zero results, even though I can see folders under that path in CRXDE.Here is the query: SELECT * FROM [sling:Folder] AS s WHERE ISDESCENDANTNODE([/content/ohip]) Also tried with cq:Page like:SELECT * FROM [cq:Page] AS p WHERE ISDESCENDANTNODE([/content/ohip])I confirmed that /content/ohip exists and has pages/folders underneath. Why is this query not returning anything?Thanks in advance.

What is it?A profile snapshot is system generated dataset which is generated daily in AEP, providing information about the unified profile.A profile snapshot in Adobe Experience Platform refers to a snapshot of the attribute (record) data that your organization has within the Profile store. This snapshot provides a static view of the data at a specific point in time and does not include any event (time series) data. How to access itTo access it, navigate to the list of datasets in AEP, where you'll find the profile snapshot.Simply filter to 'Show System Datasets' and search for 'snapshot'You can then go to the dataset page where you'll find the exact table name which you can then copy to use in Query Service: Ie: profile_snapshot_export_fea1xxf3_0edb_xx74_b964_8a63d48xxxxx  For instance this can be used in Query Service to better understand what profiles might be part of a particular segment following the latest daily segment evaluation taking place in AEP.Counting recor

I set up a different department with a request queue and some custom intake forms. They received a request, converted it to a project, then somehow managed to close the request but the project is still open. They want to re-open the request. This is my first time setting up completely different request queues so I'm not sure how to switch the request back to Current or In Process. If I just click on it, it says I don't have access (even though I'm the admin) so it seems like it's a triggered field and I'm not sure what to do to reopen it. Or do I just need to copy it and connect the project to the copied request? 

Hi, I have an inherited instance and just found a project that is "queued" that is showing up on users projects list. This project has no tasks but all of our projects, requests, and documents are tied to it. Does anyone know why we would need something like this? We have the correct project/request forms set up but this is an actual project. Thanks!

I am doing a test where the user is to be shown a pop up with continue link that will take him to previous page link . Now that pop up will come in the users next visit . And link will be from his last session last page which he exited . The pop up should show only only on the home page and should show only on the next visit and once shown should not be shown again . I am having trouble in writing the script where these conditions are met. Can someone pls help in this ? Conditions-1. Activity only on Home Page2. Activity to be shown in the next visit only once. 

Hello Community, On a URL, I want to add an anchor link, plus a campaign tracking code, but on doing so and loading the URL, most of the time the section of the page that we intend to anchor and load is not showing unless the page is cached in the browser- basically i have to load the page twice to see the anchored section. Any suggestions? https://www.deloitte.com/ca/en/about/story/impact/impactthatmatters.html?id=deb_test#podcast Thanks

Hi all,I've run into issues with mapping inside the data prep tool, specifically within productListItems. The solution would need to be able to iterate through an array.Currently running into an issue where productListItems.SKU is missing. My team has been unable to reproduce the issue but have decided that temporarily putting in a fake SKU while resolving the issue would allow datasets to continue to be ingested while giving us the ability to search for the errors.In Data Prep, we have used the following calculated field but to not success.iif(is_empty(productListItems.SKU) == true, "MISS_SKU", productListItems.SKU)iif(is_empty(SKU) == true, "MISS_SKU", SKU)The target field is productListItems[*].SKU.Any help would be appreciated!