Adobe Journey Optimizer

Hi, I want to join delivery and tracking logs for push. For email I know we can use “messageProfileId” but I can’t see that column in Push tracking logs. Do you know if there’s an specific column (or maybe a concatenation of ids) to join both Delivery and Tracking for push? My goal is to see the opens or clicks for a profile who received the push. Thanks.

Does these also works for event journeys? 

I can find these from APIs may be, but I dont see any dataset which has this information.

Hi Adobe Community, Greetings!  For AJO use case where streaming segment is one of the core dependencies, I wanted to check if we can potentially configure a trigger event journey that does not depend on streaming audience qualification?  Due to our current architecture with AEP, we're unable to get streaming segments to work in our instance, because our current connect type is based on a batch type of connector. So, even though we have set the ingestion cadence to 15 mins and profiles + events update in the profile store <15 mins but still the streaming audience do not qualify in real/near-real time as the current connection type doesn’t supports it. All other factors necessary for streaming segment to qualify is satisfied, except the connection type.  Creating a new connection would significantly delay our use case deployment. Hence we were exploring creating journeys that would trigger based on events.  As am not aware about AJO (am an AEP dev), Just wanted to get expert opinion

I have enabled the “add an alternative path in case of timeout or error” option for an email action in an event-based journey.When I triggered an event, one profile entered the email action. Due to an error (the email address was missing in the event payload), the profile moved to the alternate path (timeout/error path).However, I’m confused about the statistics shown on the End node:Entered: 2 Error: 1Since only one profile went through the email action, shouldn’t the Entered count in the End node be 1?Also, since the alternative path is enabled, the email action itself does not show any error count, and instead, the profile continues via the alternate path. The End node then shows Error: 1.Can you please confirm if my understanding is correct?  

Hi everyone! I’m Dr. Margareth Legaspi, and I’ve spent over two decades working in education at both the local and state levels. I’m excited to be attending Adobe Summit for the first time and am looking forward to learning more about Adobe’s products and initiatives, especially those impacting the education space.If there are other education leaders attending, I’d love to connect, exchange ideas, and hear about your experiences. Looking forward to a great conference! 

In AJO, if a message is queued during quiet hours and contains a dynamic attribute (e.g, price) that changes during that time: Will the message use the value from when the event was triggered or the latest value at the time of delivery after quiet hours? Our requirement is in the night time, price of products change ($10 to $9) so we have to ensure that the profiles paused in quiet hours are getting sent the email with correct price ($10) -- approach for this. Will using “Discard” option in Business Rules in this requirement work?.   

I’m working on a transactional journey in Adobe Journey Optimizer that is triggered by an event tied to a Prospect Event Schema.At the same time the event is ingested, the same individuals are also being written to the Prospect Profile schema. I’ve validated this by comparing timestamps and primary IDs across both the Event and Profile datasets—data is being populated correctly in both places.To account for any latency, I’ve added a 15-minute Wait activity immediately after the event trigger to allow for profile ingestion and stitching.Data Structure Context Event Schema Does not contain consent values (true/false) Contains SourceID, which maps to commPreferenceType in the profile Profile Schema Contains commPreferences Includes both: commPreferenceType granted (consent flag) IssueAlthough the journey is triggered by the event, I am attempting to evaluate Profile data within a Condition (Optimize activity) to determine eligibility for email communicat

Hi Community Members​@AmitVishwakarma ​@Asheesh_Pandey ​@kautuk_sahni ​@akshay_kashyap ​@bjoern__koth Any suggestions would be appreciated thank you Is it possible to  expose the ranking formula score in Code-Based Experience so it can be accessed by third‑party systems requesting offers via the Edge Decisioning APII understand that this is a runtime activity where in the system will calculate the offer priority and provide the score https://developer.adobe.com/data-collection-apis/docs/endpoints/collect/https://experienceleague.adobe.com/en/docs/journey-optimizer/using/decisioning/experience-decisioning/experience-decisioning-rankings/ranking-formulas Code based Experience Logic!--scriptorstartfragment-->We are able to retrieve the offers that are eligible for this decision policy.The ranking formula is available under subPropositions(base64 encoded values).However, we want to understand whether it is possible to send the ranking score as part of the response.If so, which attribute

Looking for some best practices on how to manage/contain all of our audiences. As more and more campaigns come through, our audience list gets larger and larger with some not being deactivated after the campaign is finished, duplicates, etc. Some questions about capabilities are below. Thanks for your help! Is it possible to look at inactive/deactivated audiences? For audit purposes, we would like to keep a list of audiences we are deactivating to show they aren’t in use anymore. Obviously we can use the UI tool and filter, but this might quickly become not enough. Looking into using a query/API but unsure if possible.   Is there a way to see audiences that are being used in a live journey currently? With out large list of audiences, some might have been used in multiple journeys and before deactivating them, we would like to check if they are actively being used. I thought there was a safeguard in place that when you deactivate an audience, it would not let you if it was being used, b

 We’re hosting an Experience League Live session on Wednesday, April 8th at 8:30 AM, focused on:New Use Cases for Customer Engagement: iOS Live Activities, Web Push, and Persistent MessagingAlongside Brent Kostak, Don Huynh, and Robert Calangiu, we’ll explore how you can extend Adobe Journey Optimizer to deliver more real-time, visible, and persistent experiences across new channels.💡 Topics include:• iOS Live Activities• Web Push Notifications• Message InboxIf you’re looking to expand your engagement strategy and get more value out of Journey Optimizer, don’t miss it.🔗 Register here:https://engage.adobe.com/ExpLeagueLive-260408.html?sdid=H822XBWW&mv=socialSee you there! 👏 

Personalization in customer engagement has matured considerably. Brands now segment audiences with precision, tailor content to individual preferences, and orchestrate journeys across channels. Most of that work focuses on what to send and who to send it to. Timing is often treated as an afterthought. That gap shows up quickly in practice. A healthcare provider sends an appointment reminder at 4 AM. An e-commerce platform fires an abandoned cart email at midnight. A bank delivers a credit card offer via SMS at 5:30 AM. Every one of those messages was personalized. The content was relevant. The audience was well targeted. The channel was right. But the delivery time was not personalized — and that single gap undid all the effort that went into everything else. Quiet Hours in Adobe Journey Optimizer addresses this directly. It introduces time-based exclusion rules that prevent messages from being sent during specific periods — across Email, SMS, Push, and WhatsApp channels — without requ

I am trying to solve a particular use case whereby I use a custom wait activity to determine how long to wait before a customer is sent communications. This custom wait activity needs to based on the customer’s Australian time zone. Importantly we do not have time zone preference details enabled in AEP/AJO because we do not have this source data. We might in the future. Therefore I am trying to determine if we can use the advanced expression editor to write the necessary logic within the journey to determine the customer’s wait time.  GOAL: if time of event is X-time or later local time pass through the condition and send email/SMS, else wait Z-mins until it is X-time customer local time before continuing onto the next journey node. I want this to automatically calculate/adjust for daylight savings instead of manually updating wait times whenever daylight savings changes. For example if the goal is to send comms at 12pm noon, this means if the customer is in WA (Western Australia [Pert

If I am establishing a business rule in EST timezone, and if the journey is running continuously for a year - will Adobe automatically accomodate for DST changes or will the daylight-saving timing change need to be done by the developers manually? Please confirm the same.

Hi Team, Can anyone please let me know who creates/owns the mail boxes for From and Error email addresses in AJO Channel surface config when the subdomain for this channel surface is CNAME delegated instead of full delegation ? ​@SatheeskannaK 

We recently discovered an issue in AJO. Logging details here for the community visibility so others can easily debug such problem Bug Title Sandbox Tooling failure when copying AJO Campaign Orchestration audiences between sandboxes.Product Product: Adobe Journey Optimizer (AJO) Campaign Orchestration Component: Sandbox Tooling. Expected Behavior Sandbox tooling should successfully migrate an audience package from a dev sandbox to a stage environment. If components such as merge policies are already present, the system should gracefully handle the conflict by prompting to overwrite or ignore the component rather than failing the import. Observed Behavior Attempting to import a package containing an AJO Campaign Orchestration audience fails during the upload. The import returns an OBJECT_EXISTS error ("PROFILE_MERGE was not created anew") for merge policies that already exist in the target sandbox. Additionally, it returns a NEBULA-100092-400 error claiming an invalid or missing namespac

I recently discovered an issue in AJO. Logging details here for the community visibility so others can easily debug such problem Bug Title AJO DEV Sandbox Allowed List failing to enforce domain restrictions for API-triggered campaigns. Product Product: Adobe Journey Optimizer (AJO)Component: Sandbox Administration / Email Settings (Allowed List) Expected Behavior When an allowed list is active at the sandbox level, email sending must be strictly restricted to the explicitly configured addresses and domains. If the active list is empty, zero emails should be dispatched from the sandbox. Non-allow-listed addresses must be suppressed natively before the send attempt. Reference: https://experienceleague.adobe.com/en/docs/journey-optimizer/using/configuration/monitor-reputation/allow-list Observed Behavior Despite an active allowed list configured in the DEV sandbox with specific test domains, API‑triggered campaigns are bypassing this restriction and sending emails to unapproved domains (e

Hello Everyone, I'm working on a use case, where I'm receiving 2 streaming events for same profile at exact same time. The journey is setup using unitary events. Both events getting ingested into dataset. But in Profile's event tab, I see only one event. For a profile, journey re-entrance is set to 1 second, so that for some cases if the profile with same identifier comes after a second it should get processed. Looks like journey is getting triggered for only one(first) event, since both events are hitting AJO at same time, though there is difference(of 9 second) in timestamp between 2 events.Payload1:{   "emailAddress": "<user address>",   "ProfileID":"9876543212PSR",   "Code":"PP003",   "channel": "Email",   "communicationName":"Project Started",   "_id": "1123457QWER0",   "eventType": "ajocommunication",    "timestamp": "2026-04-02T11:59:48.384Z",   "address" :"NULL",   "projectName" : "Ebill",   "status": "NULL",   "date": "NULL",  "action": "NULL",   "trackingCode": "ABCD123

Hi! I am seeing an unexpected delay with a Weekly Quiet Hours rule (Queue message).Configuration:Window: 10:00 PM to 8:00 AM (Recurring daily). Timezone: Buenos Aires (GMT-3). Frequency Capping: None.The Issue:A profile reached a Push node on Tuesday at 4:20 AM. Expected: Sent Tuesday at 8:00 AM. Actual: Sent Wednesday at 8:00 AM (27-hour delay).Questions:Does AJO treat an overnight window (where End Time < Start Time) as a single block that concludes on Day+1? Because the profile arrived at 4:20 AM on Tuesday, did the system assign it to the "Tuesday Rule" (ending Wednesday 8 AM) instead of the "Monday Rule" (ending Tuesday 8 AM)? Is this behavior documented? What are your reccomendations? Thanks!

I’m looking to create highly personalised data driven Kinetic emails. Would anyone be able to help me with this or provide any additional information as to what is supported in AJO?

Hi there, I have created an audience in AJO which is updated daily by batch sync. This has been shared to a destination with no end date. Does this mean the audience shared will be updated daily (i.e. members no longer shared when they don’t qualify for an audience and new members shared when they qualify) until I stop sharing it?Thanks, Serena

Hi, I have enrolled in a Journey Optimizer course (AJO-BP200) but have come to a shuddering halt at an early stage. One of the first instructions is ‘Start the Simulation’. Where is this? This doesn’t appear to be a paid course, but I’m thinking it is and at the point of payment you get access to the Simulation? I’m unable to find it via the AJO within my standard working interface. Any ideas? Many Thanks in advance

Get certified at Summit - we are ready with expanded testing capacity! Full passholders attending Adobe Summit 2026 can get certified for free by passing an on-site certification exam. All exams (except Adobe ColdFusion and Adobe Captivate) will be available. You may take as many different exams as you like, but you may not take the same exam more than once.  Testing hours are April 19-21 @ 9am-5pm PT and April 22 @ 8am-1pm PT. Seating is first-come, first-served. Find us at the Adobe Certification table on the 5th floor of the Venetian.  You must bring your own fully-charged laptop to take advantage of this offer. Free stable and secure Wi-Fi will be provided.  Learn more today! 

Hi everyone,I’m just starting with Journey (this is my very first Journey on the Adobe platform) and I’m sending my first email communications.I’ve noticed that on my email, an additional message appears at the bottom of the email content:“Server responded with ‘Access denied’ – check your email address and password in the account settings and try again.”In Polish beacause i am Pole: “Serwer wysłał komunikat: Odmowa dostępu”This message is being appended directly to the email body, which of course should not be visible to recipients.My questions are:What exactly is this message and where does it come from (Journey itself, email configuration, SMTP server, etc.)? Why does it appear only in some emails and not all sends? How can I fix this and completely remove it so it is not added to production emails?