Campaign Classic v7 & Campaign v8

Hello, Please guide me to change operator access.as already have only read option to Reports I want give report create access.

The workflow fails at the email delivery for a recurring one, with the above mentioned erroe, has anyone faced similar issue before ? IT says Broadlogrcp_ID violated, but these are running from long time, whats the possibilities that we have unique constraint error now , after multiple runs. 

Hi, I'm trying to use a control typology rule to dynamically set some SMTP headers of the delivery. One of the things I need to do is check the name of an enumeration based on the value configured in the delivery. In a test workflow, I was able to get the name using the application get schema method and find the desired enumeration: application.getSchema("nms:recipient") However, when I try to apply the same code in my typology rule it just doesnt find the schema, I suspect that the application object is not available. According to the documentation it should be: The complete code is: function findBounceAddress(vendor){ var schema = application.getSchema("nms:recipient"); var enum = schema.enumerations.filter(findEnum("nms:recipient:vendor")); return findNameFromValue(enum[0].values, vendor); } function findEnum(name){ return function(enumerations){ return enumerations.name.trim() == name; } } function findNameFromValue(value

Hi Team,Currently I'm trying out budgeting and have a few questions on campaign budget commitment values.How these values "planned, reserved and committed" are considered in budgeting?Also, does these values have any relevance in Budgets we define as in below snapshot?How is the REAL cost used in campaign budgeting?Appreciating any pointers to clarify my queriesThanks  

How mobile app push token would be validated for push via RT? Prior to sending out push notifications, does the RT push verify with the appsubscription service?

I have a WebApp in which I'm successfully bringing through text entered in a text box in a page activity into a subsequent JavaScript activity that uses the text entered in a variable.I am unable to use the same method to capture data from a fieldset of radio buttons to do the same thing:Successful with text boxText box on page activity:<input name="boxName" id="boxId" data-nl-type="string" data-nl-ismandatory="false" data-nl-bindto="xpath" text=""> Text box reference in JavaScript activity:var myBoxText = request.getParameter("boxName");Unsuccessful with radio buttonsbuttons on page activity:<input type="radio" id="rad1" value="one" name="radioButton" data-nl-type="string" data-nl-ismandatory="false" data-nl-bindto="xpath"><input type="radio" id="rad2" value="two" name="radioButton" data-nl-type="string" data-nl-ismandatory="false" data-nl-bindto="xpath"><input type="radio" id="rad3" value="three" name="radioButton" data-nl-type="string" data-nl-ismandat

Hello,Could you pls advise for the next scenario:The problem is that the GMAP app subscribers data is not flowing to the STAGE instance.For the app that we have installed in our mobile devices(Android/iOS), we see that the data is flowing to DEV environment ID in GMAP and then data is flowing to Okta DEV and then to DEV.We want the data in Staging environment, not dev env.Can you please confirm if we replace DEV environment ID with Stage Environment ID in GMAP, then the data will flow to stage or what else are we missing here?Thank you!

Lets say I've a Delivery schema with the next nodes Delivery/operation/@endDelivery/maxDate/@maxDate How could I assign the @621872 value to the @maxDate field? expr="[operation/@end]" is not working, as it's not detecting the node. But this one would work if @maxDate where in Delivery/@maxDate Any answer? Thank you in advance!!!!@Manoj_Kumar_ @ParthaSarathy @Parvesh_Parmar @DavidKangni 

Hi All, I want to load the data from SFTP to adobe schema using File Transfer but i have multiple files in folder can we able to load multiple files in sequence..? Thank You in advance

Hi All, I am importing the file data from SFTP using file transfer activity loading into schema after loading i want to move those file to Archive folder after 30 days i want to delete it, kindly suggest me if we have any script please provide  Thank You in advance

I want to create in an input form three fields that if I mark one I can fill it and the others I can't and if I mark the field none I can't fill any of them.Is there any way? @_manoj_kumar_ @parthasarathy @parvesh_parmar @davidkangni 

Hello,There are bounces marked as "Unreachable" with "User not found" details.Shouldn't this be marked as "User unknown" instead if this is an invalid address?As per documentation:https://experienceleague.adobe.com/docs/campaign-standard/using/reporting/list-of-reports/bounce-summary.html?lang=enUser unknown: The type of error generated when a delivery is sent to an invalid email address.Unreachable: The type of error encountered in the message delivery string, such as domain temporarily unreachable.Please, check screenshot:  Thank you!

What rights do I need to change the read only mode of deliveries?

I use the content manager for creating emails. Blocks of content is added and becomes tabs in a notebooklist in the form.The label of the tab is set with xpath-label to be the label of the kind of block that has been selected. But I would like to be able to override this label with a custom free text label entered manually.So if free text label exists it should display this label on the tab and if it doesn't exist it should be the selected block type.I see 2 main ways to do this.1. With a conditional label with the condition if the custom label is empty or not.2. Label is always the free text label which is defaulted to be the name of the selected content type. Is it possible to have conditional label on a notebooklist tab?If not how can I set the value of a field when selecting a value on another field? Example configuration of conditional label (that does not work)<container codepage="1252" name="modulesNotebook" toolbarCaption="Modules" type="notebooklist" xpath="m

Hello, is it not possible to do this? I tried including a PB in the subject line of a delivery and nothing rendered. I copied/pasted the code from the PB into the subject line instead, and it DID render. This leads me to believe it's not possible (even though it lets you) to use a PB in the subject line of a delivery, but I'd like to get confirmation of that (haven't been able to find anything in my searches thus far). Thank you in advance for your help! 

Has anyone had any success with using the option "Enable filtering of recipients who will receive the attachment" in a delivery template?I am trying to use one delivery template that should have an attached file for only some of the recipients receiving the delivery.It looks like it is possible according to the documentation: https://experienceleague.adobe.com/docs/campaign-classic/using/sending-messages/sending-emails/attaching-files.html?lang=enI am just not sure how to "define a recipient selection script", which is what according to the documentation is needed. 

Good afternoon, everyone. I'm currently working on uploading an encrypted email file into Adobe Campaign using the Read List activity.   Subsequent to this step, I have a JavaScript activity in which I've implemented the following code:function decryptValue(encryptedValue) {var decryptedValue = '';for (var i = 0; i < encryptedValue.length; i++) {var encryptedCharCode = encryptedValue.charCodeAt(i);var decryptedCharCode = encryptedCharCode - 1;decryptedValue += String.fromCharCode(decryptedCharCode);}return decryptedValue;}var query = xtk.queryDef.create('<queryDef schema="temp:readGroup" operation="select">' +'<select>' +'<node expr="email"/>' +'</select>' +'</queryDef>');var records = query.ExecuteQuery();for (var i = 0; i < records.length; i++) {var decryptedEmail = decryptValue(records[i].email);instance.vars.email = decryptedEmail;logInfo("Decrypted Email is: " + instance.vars.email);} After this code, I will need to update th

how to use javascript in transactional messaging templates and how to provide the data in seed address for a dynamic transactional message? 

I want to remove the "Language" field.Can anyone help me in this ?

please help ,me here  how can we find last delivery sent to all rceipients in adobe campaign via delivery table or broadlogrcp table? please help what condition we can put in which ytable aand get that data?

hi all, i have data like this, IdStatusDelivery Iddate1231010015-08-20231231020016-08-20231231030017-08-20231231040018-08-20231231050020-08-20233461020018-08-20233461030019-08-2023and i need output like thisIdStatusDelivery Iddate1231050020-08-20233461030019-08-2023so basically my requirement /conditions are for each id, i need max of delivery id and last modified date should be on and after 15-08-2023 and should be max of last modified date i need to club all these conditions in adobe campaign query activityplease help mehow can i set query actiivty for this please help me here, tried multiple hit and try but no luck\  and

Hi Everyone,We are looking for ACC v8 integration with whatsapp. In this context, we are looking for some comparison between different 3rd party WA provider for bulk sending capability. In your experience:a. Which 3rd party provides the bulk sending in seamless manner and how long did it take to complete the operationb. Did you face any issue/ slippage in delivery of message due to the bulk nature of delivery?Our target volume is ~ 40 mn/ day

Hello Friend,One of the clients has Adobe Campaign Classic v7 and they want to create emails using Drag-n-Drop editor. Is this feature available in Adobe Classic v7?Please confirm me urgently.

Hi All, In a query, there are 2 types of links in a query as shown in below image: (a blue link and an orange link)  Could anyone please explain the differences between these two links in a query activity of adobe campaign classic. Thank you,Rutuja Kelkar

hello sir/madam, I'm having issue with update of recipient table.the issue i'm having is that in order to update, campaign acquires row level lock using select ... for update statement.however the issue is that there's 2 tables involves with the 'select for update' statement using join.let me explain with an example. something like this will be executed prior to update.select a....  from tablea    join tableb    on tablea.o = tableb=o where tableb.c = $1    and tablea.d = $2     for update; the problem is that the value of $2 is different but $1 has same value which is causing row level lock in tableb.I'm considering using custom query for the update job but having difficulty adapting it. could anyone give me some advice ?  thank you in advance. regards,sean