Product Communities

Description -Why is this feature important to you - I'd like to know when a resource is starting a task. How would you like the feature to work - If the resource changes the task status from NEW to IN PROGRESS, that triggers an email to me, the Project Owner. Current Behaviour - No such email notification is currently configured. 

Background: SMS campaign deployed at 10PM instead of 10AM. There were messages received past midnight. This was human error and was not caught in time to do any modification to the deployment time.Issue: There were messages received past midnight. Would like to apply a capability to not have any SMS messages to deploy after a certain time frame, but currently, Marketo does not have this capability. Recommended Solution: If there is a way that Marketo can have the ability to hard code something to block any/all text message deployments outside of a certain time frame / time zone (ie. No SMS message campaigns to deploy after 9PM).

Description -When right clicking and trending a metric, please offer the ability to search for anomalies on the trended metric. Why is this feature important to you - Before changes to anomaly detection a few months ago, this was available.  Now it takes several steps to replicate.  Re-enabling this would make it much easier to drill down into various dimensions to spot key drivers for anomalies and investigating changes in traffic. How would you like the feature to work -For any trended data visualization, enable the Anomalies option. Current Behavior -When selecting a value and trending, the Anomalies option is greyed out.  For example, last 30 days by marketing channel.  Selecting top channel value, right clicking and selecting trend.  The line chart is displayed and the chart has show anomalies checked, but anomalies are not calculated.  Clicking on the freeform table, the Anomalies option is greyed out since there's no ti

Now that you've made it possible to have panels individually created at the Report Suite level, I would submit to you that it would be highly advantageous to also be able to add a Segment at the VISUALIZATION level instead of having to insert into the table itself.  Just like we're able to drag a segment into a Panel, we should be able to drag segments into the top section of a Visualization, too.This gives us the ability to have control over INDIVIDUAL visualization data and not have to keep building separate panels because of ONE specific segment.  I can't be the only analyst out there thinking the same thing. Thanks in advance!Jeff Bloomer | KPF - Manager, Digital Analytics

Description - Sometimes I create multiple panels for experiments and one is for historical information (last 3 months) and the rest are to measure the experiences. If I use "apply to all panels", it will change the historical one too, and I don't want that.Why is this feature important to you - It would save time and ease frustrationHow would you like the feature to work -  I would like to either lock a panel's dates or group panels so that I could "apply to all in the group"Current Behavior - It is either all or none with panels. 

Verbesserungsvorschlag – Zusammenfassung: Increase usability of text asset editor in AEM Forms by adding colors Use Case: Text asset editing and data field handing in AEM forms Derzeitiges/erlebtes Verhalten: Fields within text assets can have two different ways of behavior - user can add data or not. For a template author no way exists to distinguish the elements as both looks same Verbessertes/erwartetes Verhalten:  Given that a text asset is edited and  fields out of a data dictionary will be added When the field is added as "Locked", the field will appear in the text asset with red highlight color When the field is added as "Open" the field will appear in the text asset with green highlight color Umgebungsdetails (AEM-Version/Service Pack, ggf. andere Besonderheiten): AEM Forms 6.5.7 with compatibilty package Kundenname/Organisationsname: Deutsche Bank Screenshot (falls zutreffend):   Code-Paket (falls zutreffend):  

We would love if the proofing tool could support internal PDF reference links that are built within the initial PDF rather than converting it to a flat image. For instance, if a large manual/guide is uploaded with a table of contents that has page numbers that link to other pages, or if there are "jump to page 5" or "return to contents" type links that would work in the actual PDF, that these links would work within the proof viewer also.  Currently our reviewers have to download and open the PDF separately to test all of the PDF reference links, then go back into the proofing tool to comment things like "link does not go to proper page" or "link is broken", etc. This takes extra time and creates room for error.  Current behavior is that the proofing tool only supports clicking links to external sites (like if there is a link for www.testwebsite.com, you can click that link within the proofing tool), but if you click links that move you to different parts of a

Do not receive a Save warning when navigating away from the Portfolio Optimizer page

We have a lot of teams that don't convert all of their issues to projects, so it's difficult for them to see what work is unassigned as issues are not included in this part of the Workload Balancer. This does not allow for the resource manager to consider the team's availability on the same page that they are assigning the issues.

Description - We would like the ability to set the request type at a queue topic level, to enable users to receive work as issues or tasks via the same queue.Why is this feature important to you - The queue topic asks you to define the request type, but this doesn't actually work other than just categorising it. We have queues where some users want to work in agile and therefore need work delivered as an issue. Other users receiving work want to work with tasks but even though all queue settings have been put in place, they receive work as an issue and have to manually convert it.How would you like the feature to work - Queue topic request type should an additional way to  define and deliver the correct request format to a user without having to convert it. Multi-functional queues where users can work in standard or agile from the same queue, and settings can be applied to ensure they get the work in desired format. Current Behaviour - Users have to manually convert the

I would like to suggest the addition of a new functionality to record issues on the Portfolio/Program page.Currently, there are workarounds for recording Portfolio level risks/issues, but there is no direct way to register them on the same page. This could be a valuable addition for portfolio managers who want to register risks and issues that are not specific to a particular project, but rather a higher-level concern.This feature would enhance the program and portfolio management capabilities and visibility of such higher-level risks/issues.

Description - It would be great if within Launch we could apply tags to rules and data elements to categorise. We have to get creative with naming conventions to describe what a rule does and what is firing within it. If I could tag a rule with "google ads" and filter all the rules where that tag exists, I can easily edit a pixel firing on those rules. Right now, I have to write it in the name or click into every rule. Other tag managers have this simple UX feature. Why is this feature important to you - It helps us organise our implementation, and saves a lot of time. QoL function. How would you like the feature to work - Explained in the description. Current Behaviour - As above - naming conventions have to do all of the heavy lifting.

I'm referring to the functionality outlined here: Configure system updates & System-tracked updates Currently:When making changes to a Project template there is no indication in the update stream of changes made. Additionally there are no options to add template specific fields to the update stream. This means that there are very few ways to identify when and what changes were made to a project template. If a user mistakenly removes a predecessor from a task or modifies the assignments we have no way of knowing. What I would like to see:It would greatly improve project management and troubleshooting if changes made at the project template level were tracked in the update stream on the template. Additionally, it would be helpful to have the ability to add template specific fields in the update stream. This would make identifying the source of timeline related issues easier by giving some insight on when changes were made to the template. As a side note: I al

I'd love the ability to permission people/roles from seeing previous versions of a proof in Workfront Proof. For example, we start routing a proof internally and it goes through several rounds of proofing. Now it's ready for the client to see it. I'd love to send the most recent approved version to the client for review but don't want them to have access to the previous versions. They mark that up, edits are made, another couple rounds of internal review and then the approved version goes back to client. At that point they only have access to the versions of the proof they were a part of.   Why is this feature important to me? This would allow us to have one document that spans the entire life of the project but would prevent clients from seeing all of the back and forth that happened to get that piece approved. To accomplish this in the current state we have to create a clean document to send over for client review. When we go that route we are left with 2 unappealing options: 1

Description - Would like to have the ability to 'sort' report data, specifically data from a field that allows for more than 1 selection so that further excel work could be streamlined. Why is this feature important to you - This is important for our budgeting system that we built in Workfront. The data captured in Workfront is exported to excel frequently and further looked at/put into pivot tables, charts, etc. How would you like the feature to work - To have an "advanced option" in that column of data to sort the data in a specific order, or even order of how the field values are displayed in the field would be great. Example: we have apple, orange, banana, peach and plum as field values. Adam selects apple and plum and his data shows as Apple, Plum. Lucy select apple, orange, banana and her data shows as Banana, Orange and Apple. While looking at Adam and Lucy's data in our report, Apple is not aligned as the first option therefore when exporting to excel it makes it more

Description -The new Workfront Filter experience sorts filters by creation date of the filter which is not helpful. The filter tool used to automatically alphabetize filters within the filter list which was much more useful. I understand that one can now drag and drop filter ordering around but this is not very useful and simply causes more work. When one has a filter list of 100 plus filters which gets used regularly (By Administrator) dragging and dropping is not an idea feature.  Why is this feature important to you -It is more intuitive than the current Beta version of the new filter experience and saves time. How would you like the feature to work -I would like to see filters auto alphabetize. Drag and drop can still exist but at least alphabetize the filter from the start. Current Behavior-All new filters simply are appended to the top of the filter list 

Request for Feature Enhancement (RFE) Summary: The AEM Content Fragment UI should allow users to configure columns based on their preferences, making it easier to display the desired information in a more accessible format. Use-case: In the view settings menu or directly in the table results, we should be able to customize column options based on the available fields in the Content Fragments. Current/Experienced Behavior: In the settings (Customize Table), we can only select a few generic fields. Improved/Expected Behavior: Our goal is to be able to select any available fields in the Content Fragment (configurable) such as the variations, the profile owner, the profile image, the title, the description, the social media profiles, the country, the city, the job type, and the skills. We want to display the selected fields in separate columns according to our preferences. Environment Details (AEM version/service pack, any other specifics if applicable): AEM as a Cloud Service

Zusammenfassung der Funktionsverbesserungsanfrage (RFE): Make Managed Publication working for Content Fragments as it is working already for AEM Sites for References.  Anwendungsfall: Managed Publication for Content Fragments  Aktuelles/erlebtes Verhalten: References can't be controlled in a meaningful way for Content Fragments. Modified & unpublished References are just published as part of the Managed Publication without any control about it.  Verbessertes/erwartetes Verhalten: Managed Publication for Content Fragments is expected to work as in AEM Sites, incl. enhanced filter possibilities.  Umgebungsdetails (AEM-Version/Service Pack, ggf. weitere Angaben): AEMaaCS  Name des Kunden/der Organisation: Accenture PLC für smart Europe GmbH Screenshot (sofern zutreffend): Code-Paket (sofern zutreffend):  

Request for Feature Enhancement (RFE) Summary: Would like the following feature - Extend AEM Assets Bulk Import to have other data sources besides Azure Blob Storage or S3 instance. Use-case: We want to import assets to AEMaaCS from other 3rd party cloud-based CMS such as Kapost and Box. Currently the best alternate option seems to be to transfer data (6.5 TB) to a S3 or Azure instance and then migrate it to AEM. Current/Experienced Behavior: No option to configure an alternate data source (save S3 and Azure) for cloud to cloud migration Improved/Expected Behavior: Ability to configure custom 3rd party cloud data source to import assets and metadata in bulk from any cloud based CMS. Environment Details (AEM version/service pack, any other specifics if applicable): AEMaaCS - Version - 2023.03 Customer-name/Organization name: TA Digital Screenshot (if applicable): N.A Code package (if applicable): N.A   @kautuk_sahni

Request for Feature Enhancement (RFE) Summary: When you upload native XD files in AEM Assets, auto-generate a preview image like other file types: ,jpg, .png etc. Use-case: Upload .xd file, auto-generate a preview image for .xd files Current/Experienced Behavior: Generic preview icon for .XD files (see attached) Improved/Expected Behavior: preview image based on contents of XD file Environment Details (AEM version/service pack, any other specifics if applicable): AEM Assets 6.5.x Customer-name/Organization name: Walgreens Screenshot (if applicable):   Code package (if applicable):  

Description - setting up possibility to configure alerts to be triggered at specific timeWhy is this feature important to you - alerts are usually triggered shortly after midnight (CET), when data for the current day has not always been uploaded to AA. This causes false alerts to be detected, such as different anomalies and "Sent=0".How would you like the feature to work - provide possibility in alert configuration panel to select a time for triggering of alert.Current Behaviour - only possible to set time granularity of alert (weekly, daily ets)

I often want to share a PDF of a Workspace project accompanied by an email explaining the context, rather than just dumping it on the recipients unannounced. Yes, there is a description field, but that's not the same as composing a proper email, or replying to an existing thread, and there may be other related materials I want to include. So I have to email the file to myself, wait for it to come, download it, then compose my outbound email and attach it. Can you please add an instant PDF download option? 

When a task/issue is assigned to multiple people, individual users can mark 'done with my part.' This is not available for tasks/issues assigned to Teams. Would like the ability for anyone in the assigned Team to be able to mark 'done with my part.'

I'm passing on an idea from users from our in-house Web Design team to make the experience of checking off notifications in the in-app notifications area easier by simply making the blue dot bigger and easier to click on. The complaint is that because the target area is so small, it is difficult to click just right to activate the button and that makes it frustrating to the user when there are sometimes hundreds of notifications to mark as read -- that must be marked individually. Making this change to the "mark as read" button would be simple to implement as a "look and feel" type of improvement and would give the user a bigger target area than something just a few pixels wide relative to the message space.  

Description - You're doing well with v1 of the Data Dictionary, but you still have room to improve.  You need to add a line where components are missing tags.  Why is this feature important to you - Yes, they are optional to add, but these are a feature that make components so much easier to find, use, and manage, that once people understand the value, they will want to be able to manage them better.How would you like the feature to work - Just like the current interface, add another line that has a filter button to view all components missing Tags.Current Behavior - Currently, we are only given the four choices below: