Hi @bhjeong I do not think ACC has such functionality out of the box but
it could be possible if sms vendor can stop sending sms between 9PM -
8AM. Regards,Ananya Kuthiala
Hi @OlgaPOE You can do that via generic query editor too with the
following steps Click next 2-3 times until you see the following screen
and then click on "Start the preview of data" Regards,Ananya Kuthiala
Hello @ukender Which script do you require and what build of ACC are you
using ? Please be cautious while switching any sequence without analysis
as that could have consequence on the instance. Regards,Ananya Kuthiala
Hi @sushantt3671424 Alot has changed since i presented that topic during
office hours 2 years ago.. For example in latest build by default any
new schema created would have its dedicated sequence. A lot of out of
the box tables have been moved to their dedicated sequence as well which
reduces the consumption of xtknewid. I would suggest to go through the
release notes Sequence Auto Generation Second query regarding changing
sequence bit, by default sequence are on 32 bit and as of now there is
n...
Hi Kausik BAdobe no longer provide any build older than V7 9032 for
installation or upgrade in general hence i would not recommend
installing any older build for example 8932.8850, etc. Also there have
been security patches added to 9032 hence any build prior to that is not
an good option to proceed with. Here is the link for release notes which
tells you about enhancements and security patches available in new build
Release 19.1 Regards,Ananya Kuthiala
Hi @charlinew82228857This error usually comes when the block that was
put in the text version does not have any content which is why system is
returning the error, so either you can remove the block from the
template and recreate the delivery or add data in the text block to use
so it will not display the same error again.I hope it helps
!!!Regards,Ananya Kuthiala
Hi @isaiahh43009223Here is the link from product documentation for the
same Configuring filter definition Also used case documented similar to
your requirement Retargeting non-openers Regards,Ananya Kuthiala
Hi @isaiahh43009223You can query trackingLogRcp and broadLogRcp table.
Forst query broadLogRcp table to check whether an email was sent to
particular recipient and then can filter trackingLogRcp table to see
whether they opened/clicked a email.There are many ways to achieve the
requirement of yours , i just shared one example for the same. You may
also consider created a pre defined filter so you do not have to build
the same logic again and again.Regards,Ananya Kuthiala
Hi pradeepn30031990You should try using change dimension activity to
update the records successfully. Here is thelink from documentation
explaining what the activity does
https://final-docs.campaign.adobe.com/doc/AC/en/WKF_Repository_of_activities_Targeting_activities.html#Change_dimension
Regards,Ananya Kuthiala
Hi @fredericom24805345Is this the first time you are trying to setup IMS
integration ? Did you check the web logs for any additional information
you get there regarding this error ?Usually the issue is with the
association mask or product context so its worth checking the external
account as well within ACC.Regards,Ananya Kuthiala
Hi braullio_soaresYes there are delivery logs for test profiles in ACS
In order to access them you need to open the main delivery and then on
the top left of the screen you will see text "Summary". You just need to
click on that and from the dropdown box select proofsOnce you open the
proof then you would be able to see the exclude logs for
it.Regards,Ananya Kuthiala
Hi jennyf54893966From the error it appears that delivery/workflow would
be setup to use a pre defined filter which has internal name FLT12. You
need to review your delivery and check if anywhere that filter is
referred and remove it or check the workflow as well.Here is the link on
how you create it as well in case you would like to know more on this
topic Creating predefined filters Regards,Ananya Kuthiala
Hi sr508As far as i know Campaign cannot validate if a email address is
valid or not however there are few websites which i think can. Now in
order to check if an email has been sent or not to a particular
recipient, you can open the delivery and click on delivery tab and there
you can see if the email has been successful or not. If an invalid user
is targeted then then status for that user will be failed and reason
column will show the text. For example mailbox does not exist, invalid
user, et...
Hi rogert45520942As stated in error message "Please restart all
services (nlserver and web server)" You should stop all nlserver
processes from running and all web servers (either apache, or IIS to
kill attached nlsrvmod).Issue comes from the fact that if web server is
still running after a post-upgrade from a build prior to ACC-18.6.2.8949
to a build after ACC-18.6.2.8949 then nlsrvmod attached to web server
will still hold a reference to 'old' shared memory (version 105). This
will prevent nl...
Hi rohank32503627Are you talking about a demo version of Adobe Campaign
standard or does your organization already has licensed version ? There
are 2 ways of creating android push notification.1 - Configuring a
mobile application using SDK V42 - Configuring a mobile application
using Adobe Experience Platform SDKsIf you are not able to access Mobile
app channel in ACS than it might not be enabled for your instance and
needs to be done but firstly depends on if you have a demo instance or
referr...
Hi komal76Adobe campaign standard is Saas based solution hence works
via browser and cannot be installed locally so your current hardware
configuration should be sufficient.For Adobe camapign classic if you
plan to install it locally to learn and explore than 4gb of ram plus an
i3 processor would be sufficient enough plus 80 gb of free disk space on
Hdd.Adobe campaign classic server or console cannot be installed on Mac
as it only supports windows,CentOs,Debian and RHEL. Here is the document
fo...
Hi rohank30298345Please find documentation which would help you with
the same.1 - ACS - Adobe Campaign Help | About push notifications2 - ACS
- Preparing and sending a push notification3 - ACS - Understanding
Campaign Standard Push Notifications Payload Structure4 - ACS - About
push notificationsRegards,Ananya Kuthiala
Hi komal76Could you specify which tool are you referring too ? Its just
not Adobe software that would be running at times but other software's
as well so it basically depends on your usage of the application. For
example if i want to run AEM author and dispatcher instance locally i
would atleast have 8 gb of ram plus atleast i5 processor. Similarly if
you only use adobe campaign classic console then even 4gb would be
sufficient as it is just a client console and not the server
itself.Regards,An...
Hi akshayk88446729This problem comes due to whitelisting issue between
apache and web server in my opinion. If your message centre/execution
instance is hosted by Adobe then please raise a support ticket as
0:0:0:0:0:0:0:1 would need to be whitelisted in LAN security zone and
user/password needs to be set to true.In the below format :
Hi ayats67229299I see you have raised a support ticket for the same.
One f our team members will provide you with the scripts over the
ticket.Regards,Ananya
Hello somasundaramhalduraiThe url needs to be whitelisted in the server
config file under node and not in the schema. Could
you add that url in the config file. Once done save the file and via
command line type nlserver config -reload so that the changes can take
effect immediately.Also please note this task has to be performed as
neolane user on the server.Regards,Ananya Kuthiala
Hi akramullak35861785Is this test done on your local machine or a
production server ? From the error it appears instance is not able to
communicate with the tracking server. Was the tracking ever setup on
this server ? Are you able to ping the tracking server outside campaign
but from the same machine ?If this is a sandbox machine then while
creatng delivery click on the tracking/images link in the delivery
screen and un check tracking in order to send out the email
delivery.Regards,Ananya Kuth...
Hello nevinm22982398Alot has changed since i presented that topic
during office hours. For example in latest build by default any new
schema created would have its dedicated sequence. A lot of out of the
box tables have been moved to their dedicated sequence as well which
reduces the consumption of xtknewid. I would suggest to go through the
release notes Sequence Auto Generation Incase you still require the
script then please raise a support ticket so we can understand the
current situation in...
Hello jalejap52365997Is it only happening with 2 mailboxes ? Once you
open the email in gmail or outlook could you ensure all images are
downloaded Regards,Ananya Kuthiala
Hi salvdangelopersonClick is calculated with the following formula
Indicator descriptionTotal number of @source-ids for which the URL
category equals "Email click".Indicator calculation
formulaCountdistinct(Iif([url/@type]=1, @source-id, 0))Documentation
that would help -
https://docs.campaign.adobe.com/doc/AC/en/RPT_Accessing_built-in_reports_Reports_on_deliveries.htmlRegards,Ananya
Kuthiala
Hi salvdangeloIf the sftp is mounted on the same application server
then you should use the file collector activity to download the file in
a workflow.Regards,Ananya Kuthiala
Hello @Pabst_dk andreyt99885240Could you please raise a ticket for our
support team and an available consultant and provide you with the
same.Regards,Ananya Kuthiala
Hi isib65003967You can refer to the following documentation for
creating and managing users in ACS
https://helpx.adobe.com/campaign/standard/administration/using/managing-groups-and-users.htmlAdobe
Campaign Help | Managing groups and users Regards,Ananya Kuthiala
