Adobe Experience Manager

Hey All,Need your expert opinion on an Adobe Target + AEM Cloud setup.Currently, our AEM homepage is built using a single layout container (all components inside it). Because of this, Target (VEC) sees it as one DOM block, making it difficult to: 1. Reorder components 2. Inject experience fragments 3. Run personalisation without custom JS We are considering a few approaches - 1. mBox container for injection 2. Custom JS to reorder components 3. Nested layout containers (split page into sections) 4. Converting sections/components into Experience FragmentsAdditionally, we have three different user types, where the homepage content varies based on the user. One approach I am considering is to create user-specific content as Experience Fragments, export them to Target, and let Target handle the personalisation. On the AEM side, I would provide designated containers on the homepage where Target can inject the relevant content.From an Adobe best practices perspective, what would you recommen

I am trying to create configuraion to purge workflows which are older than 100 days for AEM as clouds service.Documentation -https://experienceleague.adobe.com/en/docs/experience-manager-cloud-service/content/operations/maintenance Above link says to create a node under /conf where as the link below asks you to create node under /apps for maintenance window.Sample configuration - https://experienceleague.adobe.com/en/docs/experience-cloud-kcs/kbarticles/ka-25921#environment  I'm trying to determine the correct way to create a maintenance window. I used the sample configuration and it worked, but after reviewing the documentation for second time, I realized that the maintenance window is supposed to be created under /conf. So what is correct place to keep this configuration?

I have this ruleRewriteRule ^/content/my-project/([a-z]{2})/en/(.+)\.html$     /$1/$2 [R=301,L] Now when i hit with CDN domain then my CDN domain gets converted into AEM publish domain and this is true for all the 301 & 302 redirects. Followed couple of articles and did not worked like by adding {HTTP_HOST}, is any header needed in CDN to support this?

This is a weird one.  I created a new component. No problems with it in AEM Local or lowest environment Dev.   It was present in the Design mode. I could enable it on my page. I could then add it to the page in Edit mode. However, in the Stage environment, the new component is simply missing. If I look in crx/de, the component is not there in the menu.Anyone have any idea what might have happened?  Or what sort of error messages might help me debug?thanksFiona

I have a requirment where we have a listing page with restaurants (cards). There is a filter and when end user select single filter example cuisine=french. im able to fetch the data from graphql query and return the CFs which has a tag called french. Now if end user selects multiple filters like french and italian then i need to show all the CFs which has tags french and italian through graphql. I have tried multiple ways but im getting null valuessample query:query getDiningList( $langcode: String,$tag1: [String], $tag2:String,$offset: Int,$limit: Int) {  diningList(    includeVariations: true    _locale:$langcode    offset: $offset    limit: $limit       filter:{        _path:{        _expressions:[          {_operator: STARTS_WITH,value:"/content/dam/test/cfm"}        ]        },      cuisineTag:{         _logOp:OR        _expressions:[{_operator:CONTAINS , values:$tag1}],      }        locationTag:{           _expressions:[{_operator: CONTAINS, value:$tag2}]        }    }  ){     

We’re excited to celebrate Arun Patidar ( ​@arunpatidar ), who has been named the 2025 Community Member of the Year for the Adobe Experience Manager community!   Arun is a big reason why the AEM community is such a helpful and welcoming place. Through his consistent participation, thoughtful responses, and deep product knowledge, he has supported countless community members as they work through challenges and get more value from Adobe Experience Manager.  Whether he’s answering tough technical questions, sharing practical tips, or helping move conversations forward, Arun always shows up with generosity and care. His contributions make a real difference and help strengthen the collective knowledge of the AEM community. The Community Member of the Year recognition celebrates individuals who go above and beyond to support others, and Arun truly embodies that spirit. Please join us in congratulating Arun by sharing your appreciation in the comments below. We’re grateful for everything he d

Hi everyone,I’m facing an issue with one of our Content Fragment Models in AEM where a few text fields were intentionally disabled using disabled=true and renderReadOnly=false at the field node level under /conf/<project>/settings/dam/cfm/models/<model-name>/jcr:content/model/cq:dialog/content/items/textfield. In the old Content Fragment Editor (Granite UI), these fields appear correctly disabled and are not editable, but after moving to the new Content Fragment Editor (which is React-based and built on Adobe React Spectrum), the same fields appear editable and authors are able to modify them. It seems the new editor doesn’t respect the traditional disabled or renderReadOnly properties that used to work in the old UI. Could someone please guide me on how to make these fields appear disabled or read-only in the new React Spectrum–based Content Fragment Editor? Any official documentation or best practice would be really helpful. Thanks,Abhishek A.

Hi all, Kindly point me a to a tutorial for each of a simple Content Fragment and an Experience Fragment (with just two fields, say name and address)Creation of Content/Experience Fragment Model Creation of Content/Experience Fragment from it and populating the fields with values. Process of Exposing it via GraphQL API Any Sling Model required ? If so its Code. Usage in AEM Front End (Sighly) with code.. I want to follow along this tutorial along and see this working. A similar tutorial for Experience Fragment also will help. Appreciate all your responses. Thanks,RK.

Hi all, Kindly walk me through a case study of AEM - SFDC Integration using CIF.Please involve1.Typical High level requirements2.Prerequisites3.High level steps to accomplish it.       Configurations       Customizations       Testing4.Any tutorials for me to follow and replicate this integration. I will follow hyper links to go deep on any of these steps. Appreciate all your replies. Thanks,RK.

Hi Everyone,  We had a 3rd party DAM system which was tied to our dialog by a custom sling:resourceType “/apps/custom-connector/core/ui/components/content/custom-pathfield”This is now being replaced with “cq/gui/components/authoring/dialog/fileupload” modeled on Image V3 component to allow Remote Asset Picker feature on the dialog.Previously if we had a field say “heroImage” which hosted the old URL “https://media-www.abc.com/test.png” This is now replaced by having a fileReference field “heroImagefileReference” which hosts the delivery API URL when an author selects the image from remote DAM instance such as “/urn:aaid:aem:000a885c-3807-4fbb-9a2f-9a6ae3120ccf/58fb9408-test.png”The image renders well on both authoring dialog, editor.html view and even published page.We also have written the sling model such that if no value is present in “fileReference” then we read the value in original “heroImage” to continue rendering the image. This works fine on view mode but in the authoring dial

I’m exploring to start using Image Templates to generate composed Images with embedded text.Now that we are defining Template details, I would like to save the templates in our code repository so it can be versioned, replicated through different environments and protected from unwanted access or modifications. I looked through documentation but didn’t found explicitly where can these templates be stored and at the same time, be available to be used.  Do you know if this templates can be saved in ui.apps, ui.config or ui.content modules and if there is any specific path allowed?I asked chatgpt and mentioned that it cna be under ui.apps directly below ui.apps as: /apps/your-project-name/dynamic-media-templates/ But I would like to know if anyone has already done this before. Thank you in advance for your help :) Luis Moreno

If you build content-heavy AEM sites, you know the pain: designers live in Figma, content authors live in AEM, and someone is stuck manually copying text and assets between the two. This article walks through an n8n workflow that automates that pipeline end‑to‑end: from Figma designs to AEM Content Fragments, complete with uploaded assets and AI‑generated SEO tags.I built an n8n workflow that automates this pipeline end-to-end — from Figma designs straight into AEM Content Fragments, with DAM asset uploads and AI-generated SEO tags handled automatically. Check out full article here: https://medium.com/@vorajineet/building-an-ai-driven-pipeline-figma-designs-aem-content-fragments-with-n8n-4a0a67eb06b2 

Hi Team,We are migrating all our assets to a separate AEM Cloud instance from a 3rd party DAM.Our sites instance is setup in another program while the assets is on a different program, We want to use our current components such that they are able to pull and render the assets remotely.Following https://experienceleague.adobe.com/en/docs/experience-manager-cloud-service/content/assets/dynamicmedia/dynamic-media-open-apis/integrate-remote-approved-assets-with-sites# we are able to leverage image v3 component to fetch assets remotely.However in our custom component we were not able to do so. The previous DAM image URLs were represented in these custom components as simple textfields.We modified and added the below properties - Changing sling:resourceType from textfield to fileuploadsling:resourceType="cq/gui/components/authoring/dialog/fileupload"enableNextGenDynamicMedia="{Boolean}true"fileReferenceParameter="./fileReference"fileNameParameter="./fileName"On adding these values we are abl

Hi,I am working on an AEM servlet/workflow that needs to bulk move assets using the Asset Manager Granite API. Key Requirement:The solution must reliably handle the movement of 300–500 assets in a single execution without errors such as repository exceptions, session timeouts, or failed moves. Performance and stability during high‑volume moves are crucial.I am looking for guidance on the following points: Feasibility Is it supported and recommended to move 300–500 assets at a time using the Granite Asset Manager API via a servlet? Are there any known limits, pitfalls, or configuration considerations when moving assets at this scale? Best Practices / Algorithm What is the recommended approach or algorithm for bulk asset movement to avoid errors? Should assets be moved in batches, and if so, what batch size is considered safe? Are there recommendations around session handling, save frequency, or throttling to ensure stability? Destination Path Validation Before moving assets, the

We have a legal/compliance requirement to store all our iterations/versions of our documents. In addition to retaining them for an indefinite period, we need to be able to view the various iterations/versions & markups (created via Adobe Acrobat) that have been created during the document creation & approval process of the document. I loaded a couple iterations of a document that had 7 iterations/versions created in another content management tool (again, markups created via Adobe Acrobat) and tried to access the prior iterations in the timeline preview but do not see the markups in the preview. I double-clicked on the current document and do see there are markups, but you can’t select them or hover over them to see the actual markups. We need an easy way to view all iterations/versions of a document and be able to see the markups made from version to version. 

We have recently started using Fragments in our Adaptive forms. I noticed that when I create a new fragment, the jcr property (fd:version) defaults to 1.1. However, fragments from the Core form component examples project are set to 2.1. What controls this version assignment? creating a fragment with 1.1 version does show it under /assets. Additionally, after creating a fragment, the components available are all sourced from fd/af/components/. How can I configure this to point to my project instead? I also do not see a template being selected during fragment creation, so I’m unsure how the allowed components are determined.Thanks,Abhishek

I'm using 6.5.21 and trying to call the google maps api from backend. As part of it, I have added the below dependency. in my core pom.xml  <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-dependency-plugin</artifactId> <executions> <execution> <id>copy-google-maps-runtime</id> <phase>generate-resources</phase> <goals> <goal>copy-dependencies</goal> </goals> <configuration> <includeScope>runtime</includeScope> <includeGroupIds> com.google.maps,com.google.code.gson,com.squareup.okhttp3,com.squareup.okio </includeGroupIds>

TLDR: I'm trying to investigate query param caching (example: /archive.html?page=xxx&year=yyyy) in my local dispatcher and I'm not sure how to test for it.-----------1.  If I visit https://www.myhost.com/content/myapp/sg/en/faq.html, I'm pretty sure an HTML file is created in the dispatcher filesystem (maybe in /var/www/html).If I visit http://localhost:8080/content/myapp/sg/en/faq.html, where can I find the HTML file for this page?I tried this command (after running docker exec) but it only found the default Apache HTTPD index.html. Any ideas? Thanks54177f4f6b8b:/# find / -iname "*.html" -type f 2>/dev/null /var/www/localhost/htdocs/index.html--------2. I am trying to test Cache-Control but no matter what value I set, it seems the value is always the same. ("public,max-age=60,s-maxage=300,stale-while-revalidate=86400,stale-if-error=86400")As a test I tried thisHeader set Cache-Control max-age=0Is this normal behavior?------EDIT1: I tried both docker_run_hot_

I am trying to edit the image by utilizing the masking and the original source image. While using the Firefly image fill APIs, I encountered a problem indicating that Firefly is unable to read or process the images.I have already experimented with various images, including those created by Firefly itself, but the issue persists.Has anyone else faced a similar challenge?Please advise me on what I might be overlooking !Attached is a screenshot of the Postman collection and the error encountered.  Thanks in Advance !

Hi everyone,We are migrating our Azure AD B2C login systems, which are currently using SAML, to the OpenID Connect (OIDC) protocol. We came across this documentation: https://experienceleague.adobe.com/en/docs/experience-manager-cloud-service/content/security/open-id-connect-support-for-aem-as-a-cloud-service-on-publish-tier?utm_source=chatgpt.comand we are using it for our implementation.The problem is that we are getting the following error:Caused by: com.nimbusds.oauth2.sdk.GeneralException: The returned issuer doesn't match the expected: https://apexbrasilb2cdev.b2clogin.com/[my_tenant_id]/even though we are setting the baseUrl correctly, as shown in the document:"baseUrl": "https://apexbrasilb2cdev.b2clogin.com/[my_tenant_id]/[my_custom_policy]"And the well-known configuration is located at:https://apexbrasilb2cdev.b2clogin.com/[my_tenant_id]/[my_custom_policy]/v2.0/.well-known/openid-configurationInside the .well-known file, the issuer is defined as:"issuer": "https://apexbrasilb

Just more of a question to other AEM users. Have you ever experienced delays when trying to publish multiple pages?We’ve noticed in our environment when we select 20 or more pages to publish in one go that only one or 2 publish and we have republish the remaining pages again.Any suggestions on where we could look to optimize the queue or any tips or tricks that you can suggest?

Hello Adobe Team, currently modern image formats are not fully supported end-2-end.In the CF EditorAVIF = Asset reference can be selected, NO preview image shown to authors. The delivey through Dynamic Media with OpenAPI is workingJPG XL = Asset reference can be selected, NO preview image shown to Authors. The delivery through Dynamic Media with OpenAPI is NOT able to render it. Thanks,Tim

While using Omnisearch in AEM, when I click Filter → File Type → any option, the following warning appears in the logsLOGS:it started on Nov 29th, 2025, it’s still showing warning  how to fix the issue? like how to stop the warning?

We are evaluating the technical feasibility, best practices, and challenges involved in migrating assets from Bynder to AEM DAM.Key areas where insight would be helpful:Recommended migration approaches (API‑based, bulk ingestion, custom tooling) Metadata mapping strategies (Bynder metadata to AEM metadata schemas/tags) Handling asset versions, renditions, and large video files Performance considerations for large‑scale migrations Lessons learned or common pitfalls (permissions, workflows, duplicate handling) Post‑migration validation strategiesIf anyone has experience with:Bynder to AEM DAM migrations Maintaining asset ID mappings or URL redirectsI’d greatly appreciate your guidance or links to reference architectures / documentation. Thanks in advance!