I've used the following script on individual radio buttons to allow
users to deselect an active group; however, I currently have a form with
over 100 existing radio buttons that do not have the script added.
Rather than manually add the script to each radio button individually, I
was wondering if there's a way to create function of sorts that will
allow global treatment. Script used on single radio button via click
event// If Shift button is held while clicking radio button, clear
selectionif (x...
This issue occurs with tables...Solution:1. Click on view menu at the
top 2. Choose XML Source, then click XML source tab3. In your
"Hierarchy" click on the table row you are having issue with 4. Your
cursor should move to applicable location within XML code5. Paste the
following code right before "" tag 6. Click
back to Design view, it will ask for you to saveFor more info: See this
thread...Unidentified "Untitled <draw>" object in table cell
This issue occurs with tables...Solution:1. Click on view menu at the
top 2. Choose XML Source, then click XML source tab3. In your
"Hierarchy" click on the table row you are having issue with 4. Your
cursor should move to applicable location within XML code5. Paste the
following code right before "" tag 6. Click
back to Design view, it will ask for you to saveFor more info: See this
thread...Unidentified "Untitled <draw>" object in table cell
Thank you!!!!! This has been a problem for years, and I'd usually just
delete and rebuild the table to resolve. Finally, a solution that saves
me the hassle...!
I know this is a very late response to the original question, but
hopefully this will help someone in the future....The issue you’re
having is attributed to how Apple devices sets the photo's orientation,
and it depends on how you hold the device. As long as you stay within
the Apple ecosystem everything seem to works fine. However, when you
navigate outside of the Apple ecosystem, the orientation of the device
(when snapping a photo) becomes more important.Basically, the proper way
to ensure yo...
I suspect there's something going on with the image itself. Have you
checked to ensure the image is saved in RGB vs CMYK color mode? Does the
image have a transparent background. Perhaps open in Photoshop, save as
a new JPEG, and try re-inserting in LiveCycle Designer.
I'm having an issue with floating fields adding extra spaces before and
after a currency value. The issue is that I need to show parenthesis
before & after the currency so the extra spaces are problematic. I'm
getting something like ( $95,000 ) instead of ($95,000). Or if I end a
sentence with a currency floating field, I get a space just before the
punctuation mark. So something like: "...the cost for the trip is
$325.00 !")Is there a fix to this issue? It only happens with
numeric-based floati...
I'm having the same issue with floating fields adding extra spaces
before and after the currency. The issue is that I need to show
parenthesis before & after the currency so the extra spaces are
problematic. I'm getting something like ( $95,000 ) instead of
($95,000). Or if I end a sentence with a currency floating field, I get
a space just before the punctuation. So something like: "...the cost for
the trip is $325.00 !")Is there a fix to this issue? It only happens
with numeric floating fields...
I've tested and found the "Microsoft Print to PDF" printer driver WILL
allow you to print a "password-protected" XFA (Static or Dynamic) to pdf
(effectively flattening the form) unlike the "Adobe PDF" printer
driver.Hence, using the "Microsoft Print to PDF" printer driver is an
alternate solution for printing protected forms to pdf.Using the "print
as image" option as radzmar mentions is also option, but it noticeably
decreases the quality (i.e. text becomes pixelated).Hope this helps
someone in...
Here's an alternative solution for future site viewers:var oLink =
TextField1.rawValue;//Change to name of field containing linkif(oLink !=
"" & oLink != null){ app.launchURL(oLink, true); //This will launch your
default web browser and will attempt to open link in window}else if
(oLink == "" | oLink == null){ app.alert("No link found");}
Hi,Provided your form is "dynamic" you can achieve by using:
.setInstancesWhat i would recommend is having a single Row in your table
and maybe change the name to something like "DataRow." That being said,
based on your screen-shot, the structure would
be:Table1HeaderRowDataRowFooterRowFor the DataRow, click the "Binding"
tab and check the box "Repeat Row for Each Data Item". Check the "Min
Count" box and set to whatever number of rows you always want to be
visible (i.e. 11).Next, you'll need a ...
I have a dynamic form that uses multiple master pages. The Master page
named "MPID" has a user Initial field placed at the boom for the user to
add his/her sign-off initials. The various pages within the document
(e.g. Intro, TOC, BodyContent, Closing, and References) are all assigned
to a specific master page.For example:Intro - assigned to MasterPageATOC
- assigned to MasterPageBBodyContent - assigned to MPID (note: MPID is
the named of the master page)Closing - assigned to MasterPageCReferenc...
Hi,I'm looking for a way to validate that a user has entered a value
matching either XXX-XX-XXXX or XX-XXXXXXX format. Ideally, the field
will only allow numeric and "-" characters to be entered, but if that's
too difficult...I could live with it simply ensuring that either format
was entered (perhaps on the Exit event).The script below seems to work
HOWEVER it allows the user to enter the Tax ID with 8 digits following
the "-" instead of a max of 7 digits. So basically, it accepts
XX-XXXXXXX (9...
No problem....when you get a chance...perhaps create a "new" document
with the target version set to 9.1 or higher from the start. Then copy
and paste the table into the new version and test. Also make sure
"Script-based state changes..." are set to Automatically as discussed
above. Things like this can be frustrating...but there's no reason why
it shouldn't work if your doc, content, and scripts are setup correctly.
I know this is a late reply, but I would recommend saving your target
version to 9.1 or greater. Looking at your screen-shot for the
"Defaults" section, the "Choose Target version" is set to 9.0 or later.
Unless you have reasons or a need to save at that version, I would
highly recommend bumping up to 9.1 or later as there have been bugs
associated in 9.0.Also, the part that ahlaj77 mentioned is often the
reason why added subforms would disappearing after saving, closing, and
re-opening the form...
I currently have My Photo Stream activated on my iOS device so that
anytime a photo is taken it's automatically saved to the Photo Stream
album within iOS which also syncs with the iCloud for Windows desktop
app. The idea is that I would take a photo on my iPad and have it show
up in the synced folder in Windows (e.g. iCloud Photos), then using a
PDF form with an image field (via Windows), I'd select an image from the
iCloud Photo folder to embed into the form.All works well, but I noticed
each ...
That makes perfect sense. It form is alerting you of the error since you
can't divide by 0 (or whatever the issue is...mathematically.)If you are
using FormCalc vs Javascript, try the following in the PresentValue
field...NOTE: You may need to adjust depending on the path of your
fields (i.e. if they are wrapped in subforms).if (InterestRate > 0)then$
= (PaymentAmount * InterestRate) / (PaymentsPerPeriod *
TotalPayments)else$ = ""end if(YOU CAN use InterestRate != 0 instead of
"> 0" if desired)/...
Use a multi-line text field (allowing Multiple lines) and set the field
value to "0". You wont be able to control the starting font size, but
the text will shrink when it reaches the end of the field (similar to
AcroForms when the font size is set to Auto).Note: I believe this
requires saving as a Dynamic form vs Static.
Typically this means there's something in your calculation that causing
the overflow and may happen until you (or the user) enter data that
doesn't cause an overflow. Is the calc dependent on two or more separate
values that must be present in order to get a valid result?Depending on
what the calculation takes place (i.e. on Exit event) you might be able
to modify the script to something like:if ( $ > 0) //only perform calc
if entered value is gretare than zerothenperform calc script //place
you...
Hi Geckoz100 - It could be one of 2 things (that I can think of)....
Starting with the most likely...Under Form Properties >
Run-time...ensure "Automatically" is selected (vs Manually), under
"Preserve scripting changes to form when saved". This option ensure the
form changes like hiding subforms remain intact (automatically) when the
form is saved.If that doesn't work, try naming the fields (contained in
each instance group) with unique names . vs using the default names.
Also under the binding...
Hello -The reason you are getting the error is because the system is
also validating the "hidden" group (Foreign) even though it's hidden.
Same thing would happen if Foreign is visible and all fields are
completed, but the Domestic group is hidden. It will still attempt to
validate the Domestic fields unless you wrote a script to "exclude"
them.One way to resolve the issue is by setting up the groups as
"instances" and then add & remove the instances via the radio button. So
initially, both inst...
Hi Brian -I've been out-of-town so was unable to reply sooner.Regarding
your first question/comment...I haven't tested the ability to fully edit
the code, but I presume there might be some limitations. Honestly, just
being able to get rid of the "Please Wait.." part and replacing it with
something more informative was a HUGE success for me. Were you able to
get color text as desired? Regarding the custom properties not being
saved...I haven't been able to test any form to the extent you have,
th...
Brian -I agree, the Page Zero "Please Wait..." message associated with
XFA forms can be very misleading, thus causing alot of confusion -
especially with dynamic forms since those must be opened in Adobe
Reader/Acrobat for guaranteed full-compatibility.There’s a partial
solution made possible by using an application called PDF Stream Dumper,
but it’s not very intuitive, and can be very aggravating to use.An
easier/cleaner solution is to get the Designer version of AEM Forms
(“AEM Forms Designer”...
I saw this and was curious to try your solution for future use.I added a
standard "Add" button with script:Table._Row.addInstance(1);- After the
button is initially clicked, it adds a new row to the table. - When
clicked again, it adds an additional row (Row) to the table as well as a
new Header row, the table appears on the 2nd page, and the first page is
blank.- When clicked a 3rd time, it adds an additional row to table
(table is now on page 3), the first page is blank, and the second page
ha...
@jnicholas330 - Thank you very much for the link. I just got around to
installing it tonight and things are working great.Funny, I own Designer
ES2 and ES3 and recently purchased ES4 because I was told I could change
the Page Zero default message associated with XFA forms (i.e. "Please
Wait..."), but later found out this is exactly the version I needed
(e.g. AEM Forms). Even so, I always thought all AEM components were
sever-based...I didn't know this could be installed via Windows OS.Last
quest...
Correct me if I'm wrong, but my understanding is that AEM Forms is part
of the LC enterprise platform, vs a standalone project like Designer.
Thus, I'm asking about updates to LiveCycle Designer, specifically. For
example, Designer ES2 had several standalone service pack updates (fro
Designer), but it seems Adobe no longer releases such updates despite
Designer ES4 being the latest version.If you're saying AEM Forms
Designer "supersedes" Designer ES4, and that it can be installed as a
"standalon...
As radzmar mentioned...if the instruction page wasn't created in
LiveCycle Designer, you will either have to recreate it from scratch in
Designer as the first page, or convert the static PDF to an image file,
create a new page in Designer, add an image field, then import the PDF
saved as an image. Remember to check the "embed option".NOTE: When
importing as an image, you will not get the same quality since you're
dealing with image pixels vs vector lines/text...also, the file size is
likely to i...
