Adobe Target

We are A/B testing an experience where Cohort B is redirected to a ‘/page-b’ while cohort A should see the default ‘/page-a’.What was happening initially- Initially we used AT’s redirect offers but it was conflicting with our Next.js routing/CDN . It caused flickering and messed up React's hydration process. It also prevented us from getting correct readings for our test experience in GA4This is what we did as a bypass solution -Created the A/B test using FEC with a redirect mbox and a JSON offer. Created a middleware at the Next.js level that intercepted the request from a user’s device on our server before the page loads (before any HTML is sent) It calls Adobe Target's Edge Network to get the redirect decision asking  "Should I redirect this user?" and Target responds with either a redirect decision or no action. If a redirect is needed, the middleware sends a display notification to Target for analytics tracking, then performs the redirect, and the user lands on the destination pag

How can we implement Adobe Target Recommendations where the initially displayed common products dynamically update based on the applied filter—for example, when a user selects a specific production function/gender/attribute, the recommendation results update accordingly?

In our SPA, we observed a specific behavior of Target activities: Even with renderDecisioning=false, some activities continued to trigger. The activities are present but not rendered. Since this is a SPA and there is no page refresh, in the subsequent Rule Page View we could not find the activities with the key expected by Target. Important: before user login, there were no Rule Page Views. Activities were therefore only processed after login, and everything worked correctly in that phase. Implemented SolutionTo properly handle the SPA flow without page refresh, the following was implemented: In the Rule Page View, after login, a custom code was added to handle view changes:   function onViewChange() {   var viewName = window.location.pathname || 'viewNamePage';   if (viewName.startsWith('/')) {     viewName = viewName.substring(1);   }   alloy("sendEvent", {     renderDecisions: true,     xdm: {       eventType: "view",       web: {         webPageDetails: {           name: view

I have more than fifty activities to experiment with on my native mobile application. it would be helpful if all the activities could be fetched in a single API call.Expected Solution: at.js version 2.

I often use the calculator to decide how long to run an A/B test. Up until recently we've just used Target as the reporting source, but have recently enabled CJA which we're beginning to use. When using CJA to report out on Target activities (via the Experimentation Panel), I've noticed that the lift and confidence can take much longer to calculate than it would with the same page/page traffic in Target. Is this because we're applying the success metrics after the fact, rather than defining them within the VEC? And does that mean we should be using another calculator to determine test duration when using CJA as the reporting source? Thanks in advance!

How do I enable the delivery call only when a particular section is available in the DOM?I am using the Adobe Target V2 extension. If you need any details from me, please feel free to ask.

Hello everyone, has anyone idea about why Target server-side integration for A/B testing in no-local environment stop working? I'm using the Target nodejs SDK with this on-device config:export const CONFIG = { client: process.env.NEXT_PUBLIC_TARGET_CLIENT_ID, organizationId: process.env.NEXT_PUBLIC_TARGET_ORG_ID, decisioningMethod: 'on-device', pollingInterval: 500000, // 5 minutes logger: console, timeout: 10000, // 10 seconds events: { artifactDownloadFailed: (event: any) => { console.error('[Target] 🚨 Artifact download failed:', event.error.message); }, artifactDownloadSucceeded: (event: any) => { console.log('[Target] ✅ Artifact download succeeded'); }, }, };Creating a Target client:import TargetClient from '@adobe/target-nodejs-sdk'; const targetClient = TargetClient.create(CONFIG);And executing the getOffers method:await client.getOffers({ request: { context: { channel: 'web' }, execute: { mboxes: [Array] }, id: {

Hi we integrated target with alloy js aep sdk . We had AA integrated and to the same rule we ensured that aep sdk is updated to get personalization and single “interact” call for AA and AT  . We are not using a4t.the checkbox for guided events breaks AT reporting. The checkbox was checked within the AEP sdk to have sequencing of events with target loading first and to ensure one network call exists  steps 1. created data stream and hooked up AA and AT as services and configured the dev env id to the data stream and the property variable for the dev workspace profile 2. in the tag property- rules - on aep sdk - we set guided events checkbox and radio button “request personalization - get the latest personalization decisions without recording an analytics event. …””render visual personalization decisions” is checked and grayed out observed:The personalization works and we see the results on the screen  but the reporting in adobe target no longer wo

Does that include at.js or web sdk? Unfortunately sample questions are old and include lots of at.js ....

Hi everyone,We’re running a geo-based redirect activity in Adobe Target (using the “Redirect to URL” offer) on our corporate site (EY.com).Here’s what we’ve observed:On first visit, before cookie consent is accepted (OneTrust banner visible), Adobe Target is blocked from loading — so the redirect doesn’t fire.Once a user accepts cookies, the page doesn’t auto-reload, so Target still doesn’t initialize.The redirect works only after a manual page refresh (when Target finally loads).Questions:Is this expected behavior when Adobe Target is gated behind OneTrust consent?How do other enterprises handle geo-based redirects for first-time visitors — before Target can load?

by Christopher Davis and Kevin ScallyWhen reporting on Target activities, there are often times when a report’s content does not align with expectations. Sometimes this is simply because something isn’t as intuitive as it seems, other times it may occur because there is some troubleshooting to be done. This post compiles some of the “greatest hits” of FAQs & Troubleshooting on Activity Reporting with Target as the reporting source. Check out Part 2 and Part 3, where we cover these same ideas for when you are using A4T as your reporting source (Part 2) and also for when you are using a third-party analytics tool as your reporting source (Part 3)!Understanding Your Success Metrics  Target reporting's most common reporting issues center around visitor or success metric counting. When using Target reporting, it is important to understand the success metric you have selected. A full breakdown of success metrics can be found here, but at a high-level, Target can track the

I have set up reporting like that:How to send the mbox with web sdk?alloy("sendEvent", {xdm: { ...},decisionScopes: ["renuve-generating"]})Something like that?

Hello!I need help with creation of an authentication token for Target profile update API.What I did so far:I've created a project in the dev console and connected TargetI ran a test via https://ims-na1.adobelogin.com/ims/token and created a Bearer token successfully.But when I now try to use that token with the Target Bulk Profile Update API I get the message "Authentication failed, make sure a valid token is provided" (using http://clientcode.tt.omtrdc.net/m2/CLIENTCODE/v2/profile/batchUpdate with the correct client code of course).What am I doing wrong? Did I forget a step? When I generate a token in Target settings, everything works perfectly, but the setup is not ideal because this token is only valid for 90 days.Thank you!Jan

How does A4T support virtual report suite integration?

Hi all, I have a question from the reporting side. When we share AT findings with the stakeholders, they want to know the accuracy of these models for every optimal experience identified for a segment. In AB activity, we have Confidence (pvalue T-Test) to understand the impact. Which accuracy score do we use in the case of Auto Target? 

Do you know of any validation of JS code put into AT activity in the area of security?

Hi guys, I have a new Adobe Target integration coming up for a client & just wanted to know that we configure Target with AEP or AEM to get all the user details from the website? I had mentioned AEP & I was said its not right. Kindly help. Thank You.

Hi all   we are excited to share that #3 of our popular Adobe Target Engineering Webinar is now open for registration. Just following this link for all details and registration form: https://bit.ly/45oIX2p   The objective of this "Back2School" webinar is to provide you a look under the hood to discover what our Adobe Target Engineering team is working on. You will also have the unique opportunity to ask questions or to send us your question beforehand by registering.   Agenda is likely to highlight exciting insights and best practices around:   Target & Single Page Applications (SPA) Recommendations (over 15 algorithms, model training, collaborative filtering, Jaccard Similarity...) To be defineda Q&A (submit your questions via registration)   Get skilled-up and trained for this "Back2School" period and register now!   Finally, get all your nerdy questions answered live from our friendly & geeky Adobe Target engineers!

Hi,I am trying to access mbox parameter in profile script, for WebSDK implementation. Below is the code- For triggering mbox in Target activity-alloy("sendEvent", { xdm: { eventType: "decisioning.propositionDisplay", _experience: { decisioning: { propositions: [{ scope: "test" }] } } }, data: { action: "testing", data: "recipe1" } }); In profile script- if(mbox.name === 'test'){return mbox.param('action') + mbox.param('data');} But I am not getting any value. I have enabled the response token as well. If anyone knows how to send adobe target mbox params in WebSDK, please let me know.  Thanks in advance!

Hello all! Thanks for taking time to read this first article in the series of Adobe Target Technical Tuesdays. Together with my colleague , we will focus on answering common challenges Adobe Target practitioners face and sharing some ways to make the most out of this powerful tool.   Why Frequency Capping as a topic for this article? First, let me explain why I selected the subject for today's blog. As part of our role as community advisors, we consistently strive to assist fellow members of the Adobe Target community in addressing their queries and concerns on this platform. One particular question, in various forms, has cropped up repeatedly: "How can I ensure that an experience is displayed a limited number of times?" Recognizing the significance of this query, I decided to craft a comprehensive response that encompasses both the technical and business aspects of the solution. Our aim is to provide valuable insights to our colleagues, empowering them to enhance customer experi

Hi there, I wanted to know if we have an option or a method to have the historical data?We are demerging our firm from the main company & we want to have all the historical data from this main company Adobe Target, as per my knowledge we don't have an option to get that data as you clone or migrate the activities it will be a new activity all together.  So please help me out how we can have this historical data so that we can compare the performance once the new Adobe Target is up & running.

I am working with only AT and Web SDK. So I need to write user categories into user profile (my customer does not have AA)Depending on the URL path I would like to update visitor profile with values:if /finance profile.interests = 'finance' if '/real-estate' profile.interests = 'real estate' How to do that in order to have on the profile array of values?Likeprofile.interests = [finance, real estate, banking .....]Any ideas?

Hi All,We are passing batch audience from Adobe CDP to target for next page personalization. There are two pages which we are activating personalization on. Here are the scenario:User lands on Page 1 and on their next visit to the site they are served page 2 as the first tab. This works fine as we have created an audience in CDP and passing it to Target. The problem is that these user upon their third visit are still shown the page 2 as the first tab and can never go back to page 1 as the target experience keeps reloading. We have tried excluding the audience but it excludes from the personalization altogether. What is the best possible scenario/solution here ?

Is it a way to use event Type in Target audience building from Web SDK? Updating Media