Campaign Standard

I'm looking for information on how to mask recipient profile data in Campaign Standard.  We need to be able to query attributes in each profile of the entire the population for sizing counts but should not be able to see any data (preferable) or certain fields (if cannot mask all recipient data). Has anyone successfully masked their recipient profile data in Campaign Standard?

Hello Folks,Hope you're doing great!I have a question where whenever template/page content is changed in AEM, we have to come to Adobe Campaign Delivery activity -> Click on Refresh Content or De-Sync existing template and sync new template.Let's assume template remains same and only content changes. In that case we will click on "REFRESH CONTENT" option available there but it requires an manual intervention everytime . So is there any way that it can be automated like whenever there is a content change, it will be published in AEM. Campaign Workflow will be made to automate and should automatically get updated content (without any refresh hit) before sending out email. Is it possible? Quick help is appreciated Regards,Sri Bhargav

Dear all, I want to find all the workflows in execution, but stop them through a query, could that be possible. thanks for your help, Kind regards,celia 

ACS will not save my conditional expressions. I have created a newsletter email that each structure (article + image) has various dynamic conditions that will decide whether to display that structure based on profile data. For profiles that will not see a specific article/image (structure), I want to remove the extra spaces in the email. I created a condition using an expression if met should remove the structure so there are no extra spaces or placeholders in the final email delivery. However, it will not save. I click accept and save but the conditional express isn't saved properly. I was getting an error that was along the lines of "error with saving your thumbnails". Note, the system runs extremely slow. Why will my conditional expression not save but if I used the out of box simplified conditions it does save? Is this a system, config or user issue? Thank you! 

I'm trying to display the bracket character around text in a header. I can add the character in the email editor (top pic), but it won't show up in the email itself, preview or when sent. I tried adding the html character into the html editor (second pic), but it still won't show in the email. I don't know what else to do? Third pic is how it shows in preview. My onsite tech support is also out of ideas. Help? 

Buenas estoy enviando unos archivos en lo que se supone que el salto de linea es LF y ellos quieren que les llegue el salto de linea como CRLF, como puedo cambiar eso? Gracias

Hello! What does it mean when a user is excluded from a trigger by Exclude Domains (domainExclusions)? I've looked for an answer but didn't find it.  Thanks in advance,Thais

I'm trying to update the credentials for Adobe Campaign (Mobile AEP SDK). I follow all the correct steps for updating for iOS (I added the iOS Bundle ID, the .p8 certificate, the Key ID, and the iOS Team ID), and when I try to save, it returns the following error (URL query ID omitted):Error while creating the production application. Error: {1}. HTTP header 'WWW-Authenticate' used for proxy authentication not found. INT-150006 Failure while processing HTTP request for URL 'https://mc-api-activation-reactor.adobe.io/companies/{...}/app_configurations'. INT-150014 Failed to send an HTTP request to server 'mc-api-activation-reactor.adobe.io'. XTK-170068 Error while creating mobile app: '' Error while executing the method 'ChangeMobileApp' of service 'nms:mobileApp'.How can I resolve this?

Hi all,I am currently on the training video for Create an email delivery (Create an email delivery | Adobe Campaign)Can someone explain the logic at 1:18 where "No longer contact by email" is set to False?Many thanks. 

I have the requirement to upload html content in deliveries which has multiple images. One option which I am aware of is to upload each image in the public resources, upload images one by one and replace the adobe generated source url with the image path in the HTML. This is a very tedious process and error prone. I came to know that I can directly import the entire HTML into the delivery and the images in the HTML will be automatically uploaded. But when i tried this, it didn't happen. I also tried uploading images one by one into the delivery once as an attachment and another time wit the insert image icon in the delivery. But with none of these option, it turned to be what I want. Is there any simpler way to achieve what I am trying to do. If Yes, could you please share the step by step process ?

Hi, content fragment updated in delivery templateNow, to get the updated fragment in a recurring delivery you need to go into template edit mode and then save & close to get the updated fragment. Imagine there are hundreds of them, what is the trick to get them all updated without this manual procedure?

Adobe campaign: reporting function of adobe campaign standard is not working.

Hi, getting this error when trying to publish an events transactional message, what is this workflow and can it be triggered manually? DLV-490142 Events were previously received but not processed and need to be cleaned up. You must wait for the daily cleanup workflow to run.   

Hi, We have previously set SMTP headers to support list-unsubscribe. For example: Precedence: bulkList-Unsubscribe:<mailto:bounce@123.xx?subject=unsubscribe<%=escape(context.mimeMessageId) %>>List-Unsubscribe-Post: List-Unsubscribe=One-Click Now I saw about modifying SMTP parameters could break the OOTB One-Click List-Unsubscribe: https://experienceleague.adobe.com/en/docs/campaign-standard/using/administrating/configuring-channels/configuring-email-channel#list-of-email-smtp-parameters  So my question is how to set the SMTP headers to be compliant with the One-Click List-Unsubscribe requirement from Google and Yahoo!?  

Hi Community,I have created a landing page which will be active throughout the campaign period. The promotional date for the customer who subscribes through the LP is from the 1st of the month till last date of the month. The same customer cannot subscribe to the service after the promotional period ends even by clicking on the old email which has the LP link. How to disable the LP link once it has been used without expiring the entire landing page? The customer should be able to use the link only once in 3 months. 

Hi Community,My requirements is to send the campaign start and end date (promotional period) to be used in transactional message. The event is linked to service subscription and when the customer subscribes to the service, they get the confirmation email. I am able to populate the fields from the Profile schema, but am not able to figure out a way to send the enriched custom fields to the event trigger definition. Is there any workaround possible? Thanks!

The current expression is ending the workflow at 7pm but we need it to continue to run until 10:50. This is the function we are using in a test activity.  What is weird is in one workflow this same formula runs until after 11 while in another it ends at 7pm.Iif((Hour(GetDate()) > 6 AND Hour(GetDate()) <23), 1, Iif(((Hour(GetDate()) == 6 AND Minute(GetDate()) >= 30) OR (Hour(GetDate()) == 22 AND Minute(GetDate()) <= 50)), 1, 0))

Hi All, Is it possible to pass ACS report data's "Tracking URL" to Adobe Analytics? p

Hello everyone!I'm using below as a condition in my test activity:Hour(GetDate())>13Does anyone have any idea why this condition doesn't work correctly?I checked and when for example using enrichment with this function and I can see the data is populated correctly.But for some reason this test is giving me wrong results. I'm extremely confused about it, it this some Adobe bug?

Hello, I would like to know if any of you could provide some helpful examples of how to use an external signal. I really want to make sure I'm maximizing the potential of adobe campaign and judging by the name this looks like it can be useful. Would the following be possible on adobe campaign?- right now we have a workflow on a scheduler that will send a verification email to a new subscriber, and that triggers every 2 minutes. is it possible to have that triggered based using the external signal instead of having a timer run every 2 minutes? Thank you!

Hello Community, We created a transactional email with an image with a link (type "external link) without problems, but now we try to modify it  to add a new url and the "Save" button is not enabled. Why can it be?  Thanks 

We use Adobe Analytics to report on website conversions/revenue. We currently pass ACS data for delivered, opens, and clicks and we are able to break-out by the campaign label or delivery label. We'd like to be able to see reports in AA broke out by audience segments but is there a way to relate this data? ie - could we add a variable tracking tag to URLs? Or is there a way to create a report based on custom profile attributes that could integrate with Adobe Analytics?

Hello All, I am using delivery templates inside Workflow as recurring delivery. I would like to get details from delivery log or broadlog or  any other way, where i can fetch source delivery template name and export to destination system? is their any way where i can fetch from which delivery template email delivery was created?

Hi All,Apologies if this question was asked before but I could not find any entry related this issue.In ACS, we have been using 11 languages and all the profiles that have been created by forms submissions (data coming through Azure) have correct preferredLanguage values so far. Recently we added another language to the forms (incl. default subscription form), however, in all tests that we performed, the preferredLanguage falls to default value (only for the new language, previous 11 ones still matches correctly). I'm not able to see the value coming from Azure but my colleagues checked and I was told that the value that are sent to ACS is correct.I checked the data schemas for the campaigns and default subscription and everything looks fine. I added AC_Language fields and republished the events but didn't make any difference.Could you share your ideas about the possible issues and how to solve it?ThanksKind regards,Karaca

Hi all, Im working on a project setting up SMS on an ACS instance and wanted some input on the kind of typology rules one should consider for both marketing and service SMS' Any input would be much appreciated. Thanks,AJ