Campaign Standard

Control Panel Release - September 2023   DMARC & BIMI records management You can now add DMARC & BIMI records directly from Control Panel: DMARC records provide a way to authenticate the sender's domain and prevent unauthorized use of the domain for malicious purposes.  BIMI records allow you to display an approved logo next to your emails in mailbox providers' inboxes to enhance brand recognition and trust.   Check out the details about this latest Control Panel Release here: Control Panel Release_September 2023   If you have any questions or feedback related to this release then please feel free to reach out through the below comment section.

Team,By Mistake, if a workflow or delivery (executed) get deleted, is there any way to recover that deleted workflow or delivery?Is there any recycle table or anything? Thanks!

Hi there, We started using AEP and the RT-CDP feature. In AEP, there is a HTTP API Destination connector that allows AEP to POST profile data to an API. I am wondering if ACS has some kind of API endpoint that AEP can POST the data to initiate an outbound communication? I looked into the External API function, but it seems to be able to perform GET function (fetch something from an API), as opposed to receiving data from a POST function. Wondering if anyone has a solution for this? Thanks.

For optimizing analytics, we're looking for a way to configure a brand so the UTM parameters passed will depend on the Campaign Standard e-mail being sent. We assume this must be possible, and that the way to do it is to use applicability conditions in the brand configuration that uses an e-mail's Campaign ID (i.e. DMxxxx), e.g.Parameter name: utm_campaign - Parameter value: 'Mailing X' - applicability condition: "when E-Mail has ID DMxxxx"  We think the answer will be as simple "<function> == 'DMxxxx'", but we can't figure out the right function. Are we even on the right track? UPDATE:Original question has been answered correctly for typical scenarios. Unfortunately, as mentioned in my reply below, I'm looking at a specific scenario where I can't address mailings via DM#, and presumably would need to pass utm_campaign based on a WKF#. Is that even possible?

The API mentioned in the below documentation is to fetch subscriptions for a service. https://experienceleague.adobe.com/docs/campaign-standard/using/working-with-apis/managing-services-and-subscriptiopns/retrieving-subscriptions.html?lang=enThe issue is that it only returns first 25 subscribers' data on data fetch and I want all subscribers data.I have tried pagination parameters in the request as well but none of them seem to work.Nor is there anything like this mentioned in the above documentation.Does anyone have any idea if there is a solution for this?

Hi all, in recents days got strange erros in some jobs... the diffusion is in error with this message :La diffusion est en échecUne erreur s'est produite, le traitement n'a pas pu être exécuté jusqu'à son terme. Erreur pendant l'exécution de la méthode 'PrepareTargetImpl' du service 'nms:delivery'. L'ordre SQL 'INSERT INTO wkDlv_2280037622_Excl( iMessageId, iRowNum, sGroupVal ) SELECT W0.iMessageId, RowNum(PARTITION BY W0.sAddress , W0.sTargetCode , ORDER BY (CAST(ABS(CAST(CAST(NEWID() AS BINARY(8)) AS bigint)) % 1000000 AS FLOAT) / 1000000.0)), IsNull(W0.sAddress, '') + N'|' + IsNull(W0.sTargetCode, '') FROM wkDlv_2280037622T Wthe translation ah the error is :Diffusion failsAn error has occurred, and processing could not be completed. Error during execution of the 'PrepareTargetImpl' method of the 'nms:delivery' service.it's as if neolane try to insert data in a non-existent tableI have these symptoms in several jobs, but not in all of them. If i copy/past a job, the second has t

Hi Team, we are keen on developing a WhatsApp Connector for Adobe Campaign Standard (ACS).Please gide me the steps to develop the same.I am Vivekanand Singh from Value First India. Regards,Vivek9958756121Email:Vivekanand.Singh@vfirst.com 

Hi everyone, We have been using push channel in PRO environment a long time without problem but we are trying now in PRE environment to testing nwe functionalities and it is not working. We have created a workflow with a query node and a push delivery node. The query is getting one profile who has several records  on  Mobile App Subscriptions. After executing the workflow, in the delivery, there is zero to deliver.How can I see what happen between the query and the push delivery to know what is happening?  Thanks   

Hello everyone, We want to create a new sender email address, including the same in Administration > Channels > Email > Configuration > Authorized masks for the sender address. The other sender emails that we have created were creating a subdomain and have the following structure "*@email.company.com" because reading the documentation we understood that we shouldn't use "*@company.com" The problem is that this time we need to use the email "info@company.com" instead of "info@email.company.com", how can we do that? Thanks

We urgently need to set up transactional push notifications and our architects and devs have been looking into the documentation https://experienceleague.adobe.com/docs/campaign-standard/using/communication-channels/transactional-messaging/transactional-push-notifications.html?lang=enhttps://experienceleague.adobe.com/docs/campaign-standard/using/working-with-apis/managing-transactional-messages.html?lang=enHowever, once we were testing the API, it appeared that it is impossible to send bulk transactional messages via API, that the calls to the API are done one by one. Is there a solution to it? using sFTP and files seems like a workaround and it seems strange that adobe wouldn't be able to handle sending them in bulk. We are using adobe campaign standard.Thanks in advance

Hi folks,  In our effort to reward the monthly top users with a gift card for their participation in the Adobe Campaign Community forums, we present to you the two top contributors in the Campaign Community for the month of August 2023 - @parthasarathy and @_manoj_kumar_. Congratulations and a big thanks to you for being dedicated and helpful community members of the Adobe Campaign Communities. Become a top contributor and win every month simply by answering questions and being helpful to other members on this community. Perhaps, YOU could be a winner next month!

In troubleshooting issues with an existing SFTP connection, we attempted to setup an alternative host and reconnect our workflows to this host. Integration Scenario: We are pushing files from Adobe Analytics into an intermediate SFTP host and then pulling the files with Adobe Campaign. Issue: We noticed that our current SFTP host is reporting issues with Adobe Campaign deleting the file after; thus, the workflow is marked as failed or does not continue moving files. Workaround: We set up an alternative SFTP host since we're troubleshooting multiple issues with this provider and are migrating away.  New Issue: We have verified all connectivity to the new host and all permissions, attempted with no IP whitelist as well, with only a generic error in Adobe Campaign: "Quote Command Return Error" Possible Solution: Add a public key to our new SFTP account, but don't know where to find this in the ACS admin.  (we had to do this for Analytics)

Hello, we're looking to send an email to prompt customers to update their app on their mobile device. We'd like to personalize the email by only presenting the app link associated with the mobile device they are currently on: iOS or Android (with a default for those who open on desktop).  When adding dynamic content conditions, where would we find the condition in Context tree to select device type? Thanks in advance for any direction you can provide!

Hello, checking to see if anyone has ever run across this issue with external links not working in mobile instances of Safari. We have an external link (i.e. https://youtube.com/playlist?list=PLpd2v5gp5pccmGDRZyZXE5qFa29J70vyg) in an email, and the attached appears when clicking on the external link in the email from an iPhone; gets stuck on our sending domain. However, the link works as expected in Safari when using a Mac.  Thanks in advance!

I'd like to include the vars.recCount in the filename, whats the correct way?nac_r($vars.recCount)_tracking.csv   

Can someone publish a comparison sheet between ACS and AJO. Mostly the focus should be on reporting. Thanks !!

I have a requirement to pass system generated date in the url in yyyy/mm/dd format. For examplewww.xyz.com?dd=2023/08/30 I got the date in additional element is the required format usingYear(GetDate()) + '/'+Month(GetDate())+'/'+Day(GetDate()) and passed it into the URL but when I click on the preview generated, in the URL '/' is getting replaced by '%2F'.www.xyz.com?dd=2023%2F8%2F30 How to stop this change and keep it in the original format? 

When I put the date in the mm/dd/yyyy in the data type text its working properly but when I reupload the later date type yyyy-mm-dd its throwing the error as "The field 'Month' with value '2023-07-11' in '2023-07-11' is too long. Maximum of 2 characters." Why am I getting this error?

What is the use of Use a dynamic template option in delivery setting and where we can use this option, which is marked in yellow 

Hello everyone, We have created several transactional messages and in some of them we want to change the email address sender but not changing the actual content block "Email address of default sender". The reason of this is that we want to have some email address sender for campaigns and some transactional messages and another email address sender for others transactional message. Can someone help us? Thanks in advance 

I am trying to import a fragment from production to staging, I have developer and admin access and org access on both instances, however, I am getting the following error @satheeskannak any ideas buddy.          

I am a bit confused, trying to add the mirror link on email designer, the mirror links are not available under fragments? but if I go and check on resources, I can see them there?  What I am doing to overcome this is to add a new column then add text, then remove the text and then click on insert content block, and I can see the fragments that way?? is this correct? shouldn't they appear under fragments to begin with?    

I need to search for all deliveries containing specific html text/code, how can I perform a mass search on the delivery schema? in ACC you could just search where data contains, not sure in ACS...

Good morning to all, Is there a possibility to see if campaign standard is connected to AEP (Adobe Experience Platform) Any thoughts that you could share is highly appreciated. Kind regards, Celia