Campaign Standard

Hi all, I'm not sure how to word this to best describe the problem - but I'll do my best. I have set up a campaign with a series of reoccurring deliveries. These went live last night, I've come in this morning to check the success of them, looking at the delivery reports. The reports show that only a few of the deliveries were actually sent, and provide the expected results. (See Screenshot) However according to the workflow, nearly all of the deliveries had a population, and should have all been sent.When I then look in the deliveries folder I can see that actually they were all sent - and I can delve further to see the reporting for these. My question is why am I not see the correct reports in the workflow reporting? And how can I fix it? These emails will be sent everyday so it's much easier to report from with in the workflow rather than manually searching. Thanks in advance, Lorna

HIcan someone suggest a good way to send transactional message ( order Confirmation) using Soap to call message center f ? I am able to call the Push event through soap. now with Order confirmation it can be complicated as a user can order multiple items and different item can have different discounts.do I have to cover all the variables (ctx) on the template and bind those on the soap call?Any suggestions, sample would be appreciated. As I mention I am able to send a simple message using the Soap or Dunamic JS in message center.thanks in advance

I have a requirement to create a report on the transactional messages getting sent. We have multiple templates. I am querying in Control instance.Header 1Header 2Header 3Header 4Header 5Header 6Header 7Header 8Header 9Header 10Header 11DAY 1Day 2Template nameSentOpenClickOpen RateClick RateSentOpenClickOpen RateClick RateTemplate 1Template 2Template 3TotalI have another query, how we differentiate standard delivery with transactional message delivery?  Also, what field in nms delivery data schema has the information of the delivery creation date ? It doesn't have contact/analysis date. Last modified date is also not helpful.  Delivery in control instance is weekly created for one template.

Typically when I send a delivery I start my workflow with a "read list" query. Last week I sent an email with 1500 people on my list but immediately Campaign only sends to 1475 and I am unsure why 25 were left off. What is the reason that campaign knocks people off the distribution at the start?Doesn't look like an email was even attempted for those folks. There are no duplicates on my list. Not sure what else it could be.

Hello everyone,For the next couple weeks, I have troubles to setup my transactional messaging in that particular section of the documentation.I don't understand how I can access to the <batchEvent> properties, they said to go to the event type properties but have no clue on how to access it and same for the delivery in that example. I'm asking that because I have an "event not covered" error when I try to link the event type with the template I publish previously.if you can show me how to access that properly, it will be great.Regards and thanks in advance,Thibault

Hello,I'm triying to retrieve, in a workflow of ACv6, the output population of a delivery, by a javascript activity but it doesn't work always. The aim of this is to retrieve the recipientID and the broadLogId.When the population is less than 10.000 recipients, it works correctly but when it is bigger than this size the script retrieve only the first 10.000 registries in the resulset. ¿Is there any limitation for the queries in javascript?Here is my code:   Anyone could help me?Regards,Andrés.

Hi All, I need to mask a CTX column in one of my schema (EVENT XML column) with some random value or can keep it blank too. I can always mask some other columns which are not CTX either by null or black depending on the data type of the column , I did some search and found that for CTX we can do it through JAVA code but I am not sure what we can write in JAVA code to mask this column.Thanks Arif

Hi all,I am thinking about using in our Adobe Campaign a kind of 'Email Pressure' limitation, in the sense of setting a total maximun number of emails that can be received by an individual contact daily and/or weekly. When that limit is reached, any subsequent delivery would need to be cancelled to that recipient.The logic to follow seems quite simple, as it looks to me that counting the records in the broadLog on a given period and take a decision based on that looks like a good process, but at the same time I don't think this is feasible for each and every contact when the email is launched as would affect the performance too badly. So I thought about using a simpler approach with flags at recipient schema level, and use Typology rules to look at those flags and take the decision before the email is sent. In this case then the challenge would be how to update those flags as close to real time as possible so they would work with recurring campaigns that run close in time.So, the quest

Helloafter how many days the database cleanup process will remove all delivery logs in ACS? i know with Classic is set at 180 Days and we can change it, but can we in ACS? and where can we do it?thank you

Can the same domain be delegated to Adobe Campaign and an external ESP during the transition phase from ESP to Adobe Campaign?

Hi, I would like your help.Is there a way to have an arrow after an "Email Delivery" as you can see it below? I want to run an activity after the Email delivery and I am wondering if there is a setting to create an arrow.

Hello!!I'm trying to capture the highest date for the same client and I do not know how to do it.Thank you very much in advance

Hi All,I am not able to open my simple wsdl file(Downlaoded) through SOAP UI. Getting below error:WSDLException (at /definitions/message[1]/part): faultCode=UNBOUND_PREFIX: Unable to determine namespace of 'tns:NewInstance'. Just wanted to setup SOAP project and test the connectivity with my Applcation.Note - I am not using real server IP rather using address as below. Is this possible cause of exception. https://xxxxxxxx.campaign.adobe.comAny help will be appreciated.

Hi ,I see the following error while sending out delivery, Pls guide.Regards,Priyanka

Hi TeamI have a requirement where I need to randomly pick coupon codes from coupon table and assign to recipients and update coupon table with code has been used  ,How can I do that ?I guess I need to write some script which dynamically fetch codes from table and assign to target recipients and update coupon table with status.It will be great if some one can help me on this ,its an urgent requirement in my project.Regards

Dear all,I am facing issue while loading data from file. The issue is - writer   WKF-560065 the type of the 'gender' expression (type: string) does not match the type of the '@gender' destination field (type: byte)At this moment I have changed(Byte -> String) data type for gender attribute in extended schema and its working fine. Is this right approch? Kindly let me know.

Hi all,We are currently using AC 6.1.1 build 8705 and are planning to upgrade to the latest version. We have been advised that we can update to 6.1 or 7, but I don't really know the differences (or even why there are 2 'last versions'). Do you know if there is any documentation available of do you have any advise on that?Thanks in advanceGuillermo

Hellois ACS has Social as delivery like with classic?Thank you

Hello everyone,i'm working on a transactional messaging and I want to make some tests to get use to SoapUI (first time using it).I first make a request to have a sessionToken that works fine with the ID and password of my instance of Adobe Campaign.So I try now to link an event with a template I make on AC but I got a weird error when trying to link that.I also check the documentation on how to link those 2 but I don't understand well how to use it.I also try to make the rtEvent in only one lign but it failed also with the same error.Those are the dataSchema and Javascript I make for this to work.<rtEvent =" wishedChannel="0" email="thibault.balasse@businessdecision.be" type="BD_Welcome">Do you have any idea on how to resolve the issue ?Thank you for your help.ThibaultUPDATE : I got this type of error now :Any ideas ?

Hi,This is probably a very basic one but I need some help creating variable content to drop into my recurring delivery's email copy.The requirement is a piece of variable content which will provide the date 30 days from current date.e.g.This will be updated 30 days from this notification on DD/MM/YY

I have created custom resource in ACS. But, During publish i am getting below error.Please let me know the steps to resolve the issue as i am new to the ACS.This one is bit urgent. Can anyone guide us to resolve this cache invalidation issue?

Hi All,We have configured Adobe campaign v6 in-house and using our firm wide relay server for sending the emails.Following are configuration we have done:<mta args="-verbose" autoStart="true" statServerAddress="localhost:7777"><relay address="abc.y.com" port="25"/>    <child>        <smtp>        <IPAffinity name="default,mid.default,dev.default,test.default">          <IP address="0.0.0.0" heloHost="abc.y.com" publicId="5" wight="5"/>        </IPAffinity>        </smtp>     </child></mta>But after this change we are seeing currently experiencing following problem:1) While sending emails adobe MTA is sending mails to only one server but relay host abc.y.com resolves to  3 hosts.2) Even on sending 10k emails we are getting error like 421 4.7.0 abc1.y.com closing connection.3) Now our email throughput is way less then compare to  what we have experienced using mid sourcing solution.Can some one please advice if configuration lo

Hi, I need your help.I am trying to run an SQL statement using Javascript in the SL section of a delivery.The code runs fine when doing a Preview, but then breaks when Proofing.These are the errors I get when trying to send the Proof:  These are the errors I see when visiting the proof details:This is the JS code I use in the SL, you can see from the screenshot that the preview works and pulls data from the SQL statement.Does this mean that I cannot use SQL in the Javascript on my Subject Line or body content?

Hi team,I created an offer in identified environment (Environment-recipients). I have selected the fall back on anonymous environment option. However, when the individual identification (Based on email id) fails on the page, fall back to the anonymous environment does not happen. Could anyone please let me what may be the cause here and if any of you have faced this issue?

Hi All,Can anyone please help me on how to get the Images from AEM DAM (Digital Assets) to Adobe Campaign (v6 or v7) and later posting it on Facebook.Thanks,Raviteja.