Adobe Experience Platform

After the update to version 1.5.0 on October 19, 2023, Adobe Analytics requests sent as POST requests are not showing in the debugger. In the browser network tab I see the requests with status 200.  The Firefox extension is still on version 1.4.1 and doesn't have this issue, so looks like it's related to the update.

Hi Experts, We are using web SDK in our set up and have datastream which has AEP and adobe target services enabled.We were checking for CJA report count with AEP, where we observed that orders and add to cart values are not matching in AEP and CJA. To which it was suggested to enable AJO under AEP service in datastream.Before proceeding, I would like to understand if there are any concerns I should consider before enabling it.And will it solve the problem of getting count of orders from the same journey in AJO. Thank you,Shivani

I have imported a batch file into AEP and I see the data is part of the union schema - Profile.  However when I try to view the data from the View Union Schema vantage point there is nothing there.  And when I try to use the data in an audience definition it says that there is no data.  But when I view the dataset, I can see the data.  What is the issue?  Why can't I see the data in the union schema, and why is Audiences saying that there is no data?  

I am using the upsert_array_replace function in Data Prep mapping. I have correctly selected the source array in the calculated fields and want to replace a specific array in the target. However, the target contains multiple arrays, each identified by an array_id attribute.Is there a way to filter or match the array_id between the source and target arrays to identify the correct target array? how can I determine its position in the target array for replacement? Any guidance or examples would be greatly appreciated!

Hi I have a question about the possibility to update a certain profile attribute under some conditions.Let's say I have a profile attribute called "Last Touchpoint". If the attribute is populated in the profile, I don't want to overwrite it with the value coming from a batch ingestion for a certain source. In other words, I want the value already in the profile to trump any value coming from a certain source, unless the attribute in the profile is empty, but the data source has value. Can this be achieved? Any suggestions?Thanks.

Hi All, In my source file I noticed conflicting values for a specific attribute  for the same identity and ingested data in the customer profile dataset as shown below:Customer IDGenderLastUpdatedID1Female2025-01-13 12:00:00ID1Male2025-01-13 12:00:00 After fragmentation, in profile store I can see the value updated as "Male" (see below screenshot). I've verified using API and it gives me the same result However, when I created an audience it qualified for "Female" only. I have cross checked the merge policy and its selected as default timebased (see below screenshot)  In my sandbox, I used only default timebased merge policy only. Please help me to understand is there anything that I missed something or how segmentation works?

Hi everyone!We are having issues giving users permissions to view and manage XDM-schemas. We have added relevant users to a product profile on the Adobe Experience Platform Service in the Admin Console, and given all the permissions available to the added users in that profile. We have added the users as both users, admins and developers to that profile but nothing seems to do the trick.Does anyone have any idea what we could be missing? Thank you in advance!// Nina  

Hi,I have a number of profiles in the Real Time Customer Profile in Adobe Experience platform. I also have a dataset/schema for Events (XDM Experience Event) and I loaded some event data for the above profiles. If I go under Profiles and check a few of these profiles I can see the events attached to the profile under the Event tab.I think that I can query the profiles using something like this:select * from profile_snapshot_export_<some_unique_Id> and I can parse the available columns in drill down for any kind of information related to the profile and its Attributes. What I want to also do is to query the events linked to the profile so I can verify any audience I build against the actual numbers in the profile.Something like this:select * from profile_snapshot_export_<some_unique_Id> as t1inner join <Events table> as t2where t1.Attribute1= "Value1"and t2. EventType="CampaignDropped"and t2.EventDropDate betwen ... and ... Any directions in building suc

Hi everyone, Wishing all a delighted new year. I am trying to retrieve the audit logs for the schema to capture the change or update in any existing schema, along with the user details. I am using the audit log URL of the Schema Registry API (1.0),(  https://developer.adobe.com/experience-platform-apis/references/schema-registry/#tag/Audit-log)Although I am getting 200, the response body is null. Can someone please help fix this issue? Below is the screenshot of the Workfront Fusion module where I have used this scenario.Regards,Alkash

I want to activate audience from AEP to Campaign V8. What does this error means? 

Hi,We have an embedded hybrid mobile application with ionic framework where we want to integrate the Launch AEP SDK in order to track the app data in analytics. The documentation(https://aep-sdks.gitbook.io/docs/getting-started/get-the-sdk) do not provide any insights in integration for ionic. Can someone please help here?

Hello,Setup: Adobe Analytics using xdm, schema set through code in edit code area JS (btw there are a bunch of warnings in the code ie 'expected identifier and instead saw '=') of AEP WebSDK extension. We are having an issue where a numeric event is not sending values on purchase (number of coupons used in the transaction), talking with experts here seems it should just work. The numeric event is not fired as data layer event but a parameter of purchase and then later turned into an event somehow to be shown in Workspace etc. I should mention that this company is unusually stringent (the most in my career) on access to admin or even testing the purchase path, so I haven't QAd myself, so I can't confirm if the tools are failing or bad setup or CMS related, etc and all I do is try my best with the limited tools and visibility I have. I've read about data object and how it is better so I'm thinking to use it, however would be great to know how to go about using both xdm and

The profile collapse issue happening when more than 150 identities, how to avoid these kind of profile collapse issues, what is the best practices?

I'm trying to figure out how to capture instances of a photo that has been clicked on. That's simple. Where I'm getting lost is the user can also "favorite", "unfavorite", "share" or "more info" the photo. Ideally, I'd like to be able to have one table in CJA workspace present the data in one table, for example: If I can only do it in multiple tables that is fine too. I'm just struggling with how my data layer and XDM schema should capture the data so I can associate the actions to the photos!?!? Any advice greatly appreciated is appreciated.  Thanks!

I have a question regarding the Segment Builder canvas within AEP. I am talking about the Build Rule option, not the Audience Composition canvas.What does the 'Add to form a group' do? In other words, how different is it from using a 'and' condition? Couldn't not find an answer for this in the user guide.  

Hi Team,We want to explore options within AEP for setting a limit to the number of members who qualify for a segment.For example : I am looking of options where we can rank members by their last activity date or their last purchase date and only qualify 10,000 members for an audience.  Can you help us to provide which approaches we can consider another that audience portal rank feature, as it has limitation to rank only on numeric values attributes?Thanks.

 Check out this article that highlights the Adobe Certification Exam Prep Portal that just launched to help you in your efforts to prepare you for your future expert-level certification exams. See the list of free practice tests that are now available to you Learn how to access the Adobe Certification Exam Prep Portal Access your free coaching report on every practice test you take  Full article here Adobe Certification Exam Prep Portal  Q&A Please use this thread for any questions. 

Hi, I have a bit of an urgent ask. When ingesting data using the edge api call documented hereI get a 502 error: An error occurred while calling the 'com.adobe.experience_platform.edge_segmentation' service for this request. Try again. How can this error be resolved for successful ingestion of data? Thanks

Hi All,I'm capturing info about clicked on names. I'm also capturing info about 4 specific actions that can be associated with a specific name. Here is how this data is pushed:adobeDataLayer.push({ event: "personAction", personInfo: { personName: "Bobby", //mandatory favorited: 0, //non-mandatory unfavorited: 0, //non-mandatory moreInfo: 0, //non-mandatory shared: 0 //non-mandatory } });The thinking behind this is if a someone just clicks on a person's name, all the other properties are zero. This signifies that a name was clicked on by the user. If a user takes any other action, for example favorites a name, then the "favorited" property will have a 1. Only one of the non-mandatory fields will have a 1, at a given time. Here is my question. In the reporting, I want to have reports that show the names and instances of any of the non-mandatory properties. For example, a report that shows

I downloaded sample aep app.while trying to connect to assurance session, after entering PIN for session I see below error in lo.AdobeExperienceSDK com...be.marketing.mobile.sampleapp E Assurance/AssuranceStateManager - SDK configuration is not available to read OrgId

I want to write a query that contains the Segment Name within Audiences, as well as each attribute/event that is written within that audience. How can I write this query? 

Use this thread to ask any questions related to the Experience League LIVE session titled, "Are you ready to level up your mobile analytics app? " Experts are monitoring this thread to ensure your questions are answered. Thanks and we hope to hear from you!

I want to connect a custom API which is created via Azure API Management (APIM) to AEP. How can I proceed? We do not have an existing API connector for the same. Is there anything like a custom connector similar to Looker Studio where we can proceed programmatically?I have the API endpoint and authorization key. Also, I connected it to Postman and getting the data output successfully. Is there a way where I can connect Postman output to AEP? Earlier I connected the Salesforce CRM connector in AEP and it worked fine. I connected it to CJA as well using Data view and Connections. But how can I proceed in custom API case?

Dear Community I have an IndividualProfile schema. I went on to create a dataset and tried to ingest data into the dataset. There is one field which is string in my CSV file in which I want to convert to DATETIME in AEP. During ingestion, I have used a calculated field to calculate the string data into DATETIME. It shows there was no error but the data that was shown came out to be blank. Please guide me into resolving this and being able to ingest String into DATETIME. Please let me know if you need anymore information. Best regards,Sching

Hi,We need to connect to a third-party web socket to have continuous data flow, and that data needs to integrate with one of the Adobe Experience Platform journeys.The WebSocket works with an initialisation; then, we need to subscribe to it. The WebSocket also needs a ping every 3 seconds to keep the subscription alive. Prior to initialisation, there is an Auth call to get the Token, which is later required for the above processes of WebSocket.We already developed a middleware that is in continuous integration with the WebSocket. It gets data as it is subscribed and pushes that data to Adobe Experience Platform using HTTPS service (using collectionID and flowID).However, the requirement has changed, and it requires removing the middleware and getting data directly from Websocket to the Experience Platform collection journey.We reviewed a couple of documents regarding this requirement but could not find any. So, could you please help us here to integrate the WebSocket, which integration