Adobe Analytics

Hi! A segment I built is causing some problems in my table. It consists of two rules that look something like this:Page URL contains {one term}ANDButton Click contains any of {20 terms}I know that "any of" segments have a limit of 100, so I don't think the segments being overloaded, but I'm not sure what else could be causing this. When I include certain date ranges, the entire panel breaks. Example with fake #s:Date Range: July 30, 2024 - July 31, 2024 | Segment shows 300 hitsDate Range: July 30, 2024 - August 2, 2024 | Segment shows 0 hits I know there's at least 300 hits since it appears when I just include 2 days, but when I include the next 2 days, those 300 clicks disappear. What could be happening here?

Hi Community, What is the classification called "Typed/bookmark" in referrer type and how & from where is it captured in Adobe analytics? Kindly advice.. Regards,Arvindkarthikeyan P

Our data layer began passing malformed product strings which map to s.products variables. After reading documentation, if the products variable is altered in an unexpected way and these values are not properly defined, this could prevent purchase data from counting properly. We also count orders with 2 custom events to split order by type in addition to s.products framework. We set a standard purchase event and custom order event to fire when the conditions when that specific product type are transacted via Launch:    Would our s.products data layer issue also impact these associated custom events from counting? Our orders have not stopped incrementing altogether, but are only averaging a small fraction of daily average. The sum of both custom events always equals total orders count as expected, even after the malformed product strings began passing through. Why would orders continue to count at all if the products variable is broken? Why are custom events affe

I am currently showcasing the orders,revenue using the last touch marketing channel. I also have tracking codes. At each tracking code level, the order and revenue are different then marketing channel.  So, my question is should I showcase to stakeholder revenue by tracking code or by marketing channels as I do not want to confuse them with it.

Hi,  We Implemented products variable in our app based on this article, https://developer.adobe.com/client-sdks/documentation/adobe-analytics/product-variable/#products-variable-with-merchandising-evars-and-product-specific-events and App developer has been Implemented the Products Variable code. How to configure Products variable in Adobe Analytics or AEP mobile SDK?  Thanks! 

I am collecting page names in prop1 and page URLs in prop2. In the analysis workspace, when I break down the page name dimension for any particular page it also shows me URLs of other pages. I would have understood if this had been an eVar set to expire on a visit, but why is it happening with props? I checked on every page view server call correct/intended page name and page URLs are being sent.

Hi, I'm trying to write SQL Code on our Adobe Daily Web Traffic Source Table. I want to match our page views from Adobe Workspace to our Database downstream query based on the Marketing Channel Processing Rules. Our first rule is Paid Search and it's based on the Paid Search Detection Rules. How do I mimic this downstream? How do I get a list of all the possible referrers/Search Engines that constitute as Paid Search? Do I need to write out an entire list for the POST_REFERRER column with all these hundreds of search engines? Some helpful links I've referenced:https://experienceleague.adobe.com/en/docs/analytics/admin/admin-tools/manage-report-suites/edit-report-suite/report-suite-general/paid-search-detection/paid-search-detectionhttps://experienceleague.adobe.com/en/docs/analytics/export/analytics-data-feed/data-feed-contents/datafeeds-referenceThanks!

I am trying to find a way to list all available reports via the Adobe Analytics API 2.0. I am aware of the endpoints to get dimensions and metrics, but is there a direct endpoint for listing all predefined report names similar to what we see in the UI. For API 1.4, we can get bookmark as workaround.

In today’s fast-paced digital world, website performance and user experience are critical. However, fixing website issues often requires development efforts, QA cycles, and deployment processes that take time and can delay urgent fixes. With Adobe Launch we have an innovative solution that allows for real-time issue resolution without going through the typical development cycle. Adobe Launch, part of the Adobe Experience Platform that empowers marketers, analysts, and developers to deploy and manage analytics, marketing tags, and scripts with ease. What many might not realize is that Adobe Launch can also be used to quickly fix or bypass certain website issues **without modifying the core site code or waiting for development deployments**. This approach is particularly useful when urgent updates or hot-fixes are needed. How Adobe Launch Can Fix Website Issues Without Development Efforts: 1. Inject Custom JavaScript or CSS.   With Adobe Launch, you can inject cu

Hi Community,   Can someone give me a way to calculate Bounces & Bounces Rate in CJA specifically? Looking for more of a direct way to define the metrics/filter. This metric is unfortunately not available OOB in CJA but is available in AA.   Thanks, Chetanya Jain

All, I am new to Adobe, and I would appreciate your help with the following:  Do you know how I can define bounce rates in CJA? Specifically, if I want the definition of a bounce to be similar to that of GA4: Bounce rate is the number of bounced sessions divided by the total number of sessions over a specified time period. A session is considered a bounce if it doesn't meet any of the following criteria:  The user stayed on the page for less than 10 seconds  The user didn't trigger an event (link clicks, video views...),  The user didn't move on to another page or screen.  Or how to define the opposite, engagement: nothing that Bounce rate = 1- Engagement rate Google defines the engagement rate as the number of engaged sessions divided by the total number of sessions over a specified time period. An engaged session is a session that lasts longer than 10 seconds, had a key event (video, link clicks...) or ha

Hi Team,This is related to marketing channels classificationone of my client opted to clean up a few of the Marketing Channel classifications, but only the specific values that were not needed were removed, which left holes in the Index Values (e.g. Index #2 was deleted, so the first value we visually see in the UI is actually index #3 and not index #2).They have one global report suite and new report suites were duplicated from the Global one, so for newer ones the index values begin with #1 and increment without the holes. So for the newer report suites, Index #2 is the same as Index #3 for the majority of report suites dues to this they were not able to make any type of classification update across all report suitesSolution i recommended to them is to delete all Marketing Channel Classifications and re-creating them, and they were able to update the index values tied to the classificationThe challenge with this solution is that all previously classified keys still reference the inde

In snowflakes while doing  units and Price calculation we are getting the alphabetical character .However if we put the below condition we are not getting the alphabetical character.SELECT rows WHERE event_list EQUALS TO 1Is this mandatory condition to give for doing the price calculation? 

  Hi Everyone I have a question if anyone can advise  something here:    We have implemented Adobe Analytics through web sdk. For every page view , we get the eventType as web.webpagedetails.pageViews:       For every link trackig, we get eventType as web.webinteraction.linkClicks :         In network it seems fine , however when we check in reports the data is incrementing for Page view when link tracking action is done. Ideally, Page view data should not be incremented with link tracking.With each action of link click , data is incrementing at two places > in page view report data and click tracking data   Is there anything we can do to fix it? or is it currently expected behaviour ?any help on this will be very helpful.

I've got a quick question about the import file header for Saint classifications. I've looked through the docs, but I can't find an explanation for what these two numbers that i've highlighted refer to. The blue one always stays the same, but the red one changes between each account.  Do they have an impact on the FTP saint upload process? 

Is any API available to automate the Adobe IMS login to fetch the auth code? I am looking to see how can I automate the process of fetching the access token for adobe analytics reporting API 2.0 I place I am stuck is the bearer token use to expire and I want to refresh the token dynamically. Is there a way out for this?  

Hello,If a purchase event is passed on a hit, without the other variables that are expected - products, revenue, and so forth - would that purchase event increment the order count, and essentially pass a null value (like zero) to the other elements that are not found? We have a case in which the traffic is being sent to two report suites, one of which has an order count nearly twice that of the other, but revenue is exactly the same for the two.  Thanks.mp

 To help you ring in the holiday season, we’re launching a certification exam sale. Through the last day of the year, December 31, 2021, all certification exam vouchers will be an extra 20% off! Vouchers are good for one year. Use your learning funds for big savings Use your yearly learning funds now so that you don’t lose them when 2022 rolls around. Just visit the Adobe Certification Voucher Center to make your purchase and enter code Holiday21 at checkout. You have up to a year from the purchase date of any exam vouchers to use them. Here’s a breakdown that shows just how affordable exams are when you take advantage of the sale: Professional & RenewalCertification ExamsNormal priceIndia - $95 USDGlobal -$125 USDSale priceIndia - $76 USDGlobal -$100 USDAdobe Partner priceIndia - $51 USD Global -$67 USDExpert & Master Certification ExamsIndia -$150 USDGlobal -$225 USDIndia -$120 USDGlobal -$180 USDIndia -$81 USDGlobal -$121 USD Partners can s

I understand Adobe is discontinuing collecting analytics from 15th October 2024 on its online dashboard but my document published approximately a month ago is already showing no views/visitors. How do I retrieve the existing data that has been collected up to now? 

getTimeBetweenEvents plug-in is not available for web SDK implementation, is there an alternative to it for web SDK implementation? I need to find the time spent by the users between two events:A particular use case would be the time it takes for a user to go from adding the first item to the cart to clicking "confirm order."

Hey I got an ask to extract data at GUID( similar to login ID) level from adobe analytics. What are steps/ways we can acheive this. What questions I have to ask. Should i use warehouse or feeds? Or any inbuilt API's/ 2) they are trying to integrate with EDP. What questions should i ask stakeholders about this. i have frequency, what cdp, volumes in mind for now.   I'm completely new to this. Any response is appreciated. Thanks!!!

I couldn't find a clear answer in the documentation- but what are the number of breakdowns supported by Reporting API 1.4 and Data Warehouse API 1.4?

When I copy data from a Workspace table and try to paste it into Excel it is not pasting correctly. It seems to paste percentages instead of the raw number. Is anyone else experiencing this issue? I know this was an issue a few weeks/months back, but seems to be back. It worked as expected this morning and do see any reported maintenance/issues documented in the system status portal.

Hey there, We're trying to create a calculated metric in CJA to match the audience that has been in AJO using a date function like DOB less than MMDDYYYY, but it's not available in CJA. I have also looked at functions available in CJA. Example - Create a calculate field in CJA where Birth Date(YYYY-MM-DD) occurs before 18 years ago. Do you have any recommendations on how to handle this date-related calculation in CJA? Also, do you know if bringing in audiences in CJA that were created in AJO is possible?  I would love to hear your thoughts!