Hi @kapilKochar ,I REPLICATED the same schema, navigation item and input
form (except for the namespace that is "cus") and I confirm you what I
said in the previous message:Folders created using the same navigation
item: I've created "Customer 1" within Folder 1and "Customer 2" using
Folder 2... but the folder-id is the same! In addition, I should NOT be
able to see Customer 1 in the view of Folder 2 (since the folder is not
a view)I hope that now it's clear what is wrong in the solution propose...
Hello @kapilKochar ,I made these checks again on the schema / navigation
item / input formand I confirm you that all the references are
correct.Could you create another folder (folder 2) with the same
navigation item and see if the Folder id assigned to your records is
different compared to records created within the first folder (folder 1)
you created?My issue is that: folder id is assigned correctly when I
create the first folder, but when I create another folder with the same
model records cr...
Hi @Jyoti_Y, I made what you have suggested (capital letter instead of
lower one) but still not working.This cannot be the problem since the
name of the template/model used by the folder is specified in the
navigation hierarchy and it was consistent with schema/form:Navigation
item:Salvatore
Hello @Jyoti_Y, Here below my "Theme" schema :Folder1 and Folder2 were
created thanks to the same custom navigation hierarchy item based on the
schema above.The navigation item has a list view (top) and an input form
(bottom)"Theme" records are created only through the custom input form
Hello @Jyoti_Y, I have defined the default folder in the schema.This is
the current status:"Tema 3" was created by Folder 1"Tema 4" was created
by Folder 2, but folder-id indicated is the one of Folder 1 (error)Even
if the folders ARE NOT views, I can see all the records no matter which
is the folder id (error) How can I specify CURRENT folder id in an input
field?And solve the second issue?Thanks,Salvatore
Could you please clarify this:"How do you assign recipients to specific
Folder: By explicitly specifying Folder internal name or primary key"How
can I specify the primary key or the internal name of the CURRENT folder
within the input form?Thanks,Salvatore
Hello all,I've added a link to "Folder" within my custom schema
"Theme":At the same time I have an input form for the creation / editing
of records of "Theme" schema and I would like to set the folder id
automatically (as done in native "Recipient" and "Service" forms). As
per my tests, I receive the error shown above: "The folder is not
specified".Could you tell me what I'm missing?Thank
you,Salvatore@Milan_Vucetic @wodnicki @Jean-Serge_Biro @Raj_bounteous
@Jyoti_Y
Hello all,The client asked if it's possible when a Scheduler activity is
configured for the first time to automatically set the timezone equal to
the current value of the timezone associated to the Operator using the
workflow. Could you please tell me:A) If it's not possible, technically
why?B) If it's possible, technically how? Where can I find the input
form? Could you provide an example? Note: Adobe Campaign Classic v7,
hosted@jwodnicki @Jean-Serge_Biro @Venu_Reddy @kapilKochar @Anita_p
@Adhi...
Hello everybody,I would like to understand which are the steps required
to connect a Generic SMPP with ACC v7 with the assumption that we want
to track not only the status of the delivery itself, but also to receive
the delivery logs for each recipient contained in the target population.
My questions are:- Except the configuration of the external account
which are the tasks to be completed?- How may the status of the delivery
be updated?- How can I technically retrieve the delivery logs? Which
s...
Hello all,May I ask you how can I include an external URL inside a push
notification?Has to be done through an application variable?I can use
"uri" variable both for deeplink (internal mobile page) and external URL
or I have to use 2 application variables?Thanks in
advance,Salvatore@wodnicki @Jean-Serge_Biro @Venu_Reddy @Adhiyan
Hello @Venu_Reddy, Could you kindly provide an example of both these
things?- Make a predefined filter as default- Use a dropdown list as a
filterThank you,Salvatore
Hello all,Can anybody tell me how it's possible to display a form
assigned to a predefined filter by default as done in the Recipient
view?Example:I selected these options but nothing happened:Further
question: is it possible to use a dropdown list instead on an input
field as a filter? How?@Jean-Serge_Biro @Venu_Reddy @wodnicki
Hello jyotiy43907700I've deleted the Typology folder in Live
environment, but the result is the same.Except the Live environment
folder, all its subfolder are generated after the deploy.Thank you in
advance,Salvatore
Hello Adhiyan C,This is the right-tab view that I see when clicking on
"Offer - design" environment:It seems all correct and similar to what
you suggested.jyotiy43907700 here below the folders belonging to my
Offer hierarchy This is the error I get when I deploy an Offer
categories:Could you tell me why I get this error and how to solve
it?Thanks,Salvatore
Hello @Adhiyan, I don't have any of these tabs on the right when I click
on the Environment folders (Design and Live). Note that I've created
these folders and they're not the default ones. The purpose is to have
multiple Offer environments, two for each country. I will attach a
screenshot tomorrow to clarify the hierarchies. Thanks, Salvatore
Hello all,I'm configuring my Offer module (space, category) but when
deploying the offer space I'm getting the following error:XFR-180000 The
file '/usr/local/neolane/nl6/datakit/eng/schema/.xml' does not exist on
the server. Unable to load the document of identifier '' and type
'xtk:schema'.SOP-330011 Error while executing the method
'CompileRealTimeScript' of service 'nms:interaction'.(1:1) : Invalid
document structureXML-110018 Error while parsing XML string ''SOP-330011
Error while executing...
Hello all,I'm not using an on-premise version of Adobe Campaign Classic
so I don't have access to server configurations.I just had a response
from Neolane Support that it's a build defect and they will release a
fix in one of the next releases.In the meantime could you tell me which
is the parameter to configure on serverConf.xml for the increase of the
number of connections? There is something else I can do through the
client in the meanwhile?Thank you all,SalvatoreFYImilanv69354962
@pablo.rose...
Hello all,I have a scheduled workflow containing a File transfer put
inside a cycle (30 iterations): the File transfer is executed 30 times
with a different server path but the same external account.After some
iterations I get this error in the File transfer:My idea is that, since
the workflow is running (status: Started) all the connections are kept
open even after the File transfer activity and Campaign reaches a
connection threshold.Could you tell me how to overcome it? There is a
way I can f...
Hello all,I open this thread to ask you any available material I can use
to get ready for Adobe Campaign CLASSIC Developer exam.I didn't find
almost anything.Can anyone help me?Thanks,SalvatoreflorentlbAmit
Kumar-mm9MvgAdhiyanananya_kuthialaPablo RoseroDebabrata.TAdobe
Campaign Classic
Hello jyotiy43907700,2) File transfer picks up all the files that
follows the regual expression, so it's possible to have more multiple
files and not just one as you supposed. In my case is not possible to
have a regular expression that select only one file.3) External
SFTPThanks again,Salvatore
Hello jyotiy43907700, On a "on premise" version you don't have access
to serverConf.xml but you have to open a ticket to Neolane.How can you
understand which is the proper value to set here? there is a calculation
you may suggest?"you can configure your workflow to pickup 100 files at
a time" can you explain how this should be implemented? there is no
setting like that in the File transferThank you,Salvatore
Hello Jon,It's still not clear where should I set the deeplink inside
the graphic user interface of the delivery.Supposing that the deeplink
is the following: myPage://profile/<%=
appSubscription.recipient.firstName %>where I should insert this
value?Could you provide me a visual example?Thank you in
advance,SalvatorePS: as said, I don't know why but I'm not able to add
Application variables
Hello Adobe Campaign ClassicI would like to understand how is it
possible to specify in an Android or iOS delivery:- the window of the
mobile app where the user shall land after clicking- additional tracking
parameters in an email delivery you normally append to the URL like
that:https://myPage.com?param1=value1¶m2=value2Which configuration
should I do in the delivery wizard in order to do that?Is it normal that
I'm not able to add any "Application variables" (I don't know if it's
here that...
