Adobe Analytics

W e are experiencing significant issues with data tracking in Adobe due to our cookie implementation. As a result, a large portion of our data dropped, making it unrepresentative of actual performance. This has raised growing concerns among stakeholders regarding the accuracy and reliability of Adobe data.As we need to ensure compliance, we are unable to make any changes to our cookie settings on our end. Given this constraint, could you advise if there is a solution to fix this? 

I am dealing with several types of data from Adobe Analytics, but discovered certain discrepancy.We are using CID with URL to track the campaign traffic. Now for two separate reasons I capture data in 2 different way.1st Way:Tracking Code ------- Unique Visitors 2nd Way:Tracking Code ------- Unique Visitors -------- Bounce Rate ------- Avg Time Spent Now I am seeing difference in "Unique Visitors" in 2 dataset. Numbers are less in 2nd way, is the difference is due to the separate parameters in 2 cases? Or there might be  some error in data?RegardsUtsav 

Hi there, We have a scenario where our email system and our AA instance are wildly off. I know comparing between two platforms always leads to issues however there is no trend whatsoever between the two systems. We decided to run a test, an email campaign that would only be sent to select internal users, and test on a multitude of devices, browsers etc. The email would contain a number of links to products and has unique campaign info that we can use to know that it is only our data. We found that all users using desktop were tracked as expected, so no issues there. However on mobile, only 3 of the 8 tests we did reached AA. In instances where we clicked on the email link from a mobile browser, seemed to reach AA ok. However, if we clicked on the links from outlook or gmail apps, there were more issues with receiving the data in AA. My question is - does anyone know of any issues surrounding email app clicks and how that works with AA tracking? The link clicks have opene

Hi,I'm using Azure (Legacy) for our data feed and we have a folder within our container. I don't see any setting to set the folder path. I tried to put "container/folder" in the container box but doesn't seem to work. Is there a way to set the path?  

I'm investigating a form issue where hitting the submit button triggers a form submission event even if the form is not submitted and we have a form error event fired right after. So in the debugger we see form submission event -> form error event in subsequent hits.I'm trying to isolate these instances by building a visit level segment, but I'm not sure if this working properly. Which option would fit best my requirement?All visit level, options:[Form success event exists] Then [Form error event exists][Form success event exists] Then within 1 Hit [Form error event exists][Form success event exists] Then within 1 Pageview [Form error event exists]I created a report using Form success event as the metric and compared these three segments.Questions:Is the "Then" operator on his own referring to subsequent hits or does it include scenarios where the second hit in the sequence happens at any point after the first one? So within the visit if visit level and for a  visitor at visito

Hello.  I am trying to clean up some of our data and in looking at it from the raw data field perspective, it appears that, particularly in non-US countries (though it happens here as well), most of the IP Addresses we are capturing (and copying into an eVar with a processing rule) are those of the ISP rather than Public IP and show thousands of visits/day to the IP.  The problem is that I can see there is a LOT of behavior that is not consistent with actual customer behavior and appears to be bots.  The only options for manually blocking bots is IP or User Agent.  These visitors also delete their cookies after each visit, creating more unique visitors than there are customers in the regions.  How can we block these or how can we get Public IP instead of ISP?  The biggest problem is that SOME of the visitors from the ISP address are legitimate customers and buying products, so we do not want to block those.  Thanks in advance.

Hi Team, We have request from our client saying that they want to track dynamic chat interaction to Adobe ana so that we can analyse on which page this chat is interacting more. 

Hi Team, I need suggestions on how to retrieve the incident status from the Salesforce API using Adobe Launch. What would be the best approach to achieve this? is there an alternative method that integrates well with Adobe Launch? Let me know if you want any refinements! 

Hi Team, We are storing user order history in Salesforce, we are required to fetch the logged-in user order total.   Please let me know is any way or extension available to pull the data from Salesforce.

Hello, I am performing checks on webpages that I manage to ensure that we have eVars and events firing to capture visit data. I have been recommended to use a number of different web add-ons but they all have no proved fruitful. Is there any advise on which tools I can use to better track eVars and events on webpages? Thank you all!

We are using webSDK for analytics tracking but we have click data disabled as it was causing double pageviews.Now since it's not enable it should not have data for exits.But I can see numbers in report when I am using exit metrics. I would like to understand, what's contributing to this data? and if that is correct? for me the numbers seems incorrect as in some case exits are same as visits.Any thoughts on this? 

My org has had a few instances of URL paths and/or page names changing globally, so I rely a lot on hit-level segments to replace dimension tables. Something I've noticed is that entries, and therefore bounce rate, does not act as expected in this scenario. When I use a segment that is hit-based with simple (URL = xx or URL = xx2) to combine the pre- and post-change URLs, it gives entries = visits. Looking at the same URLs in a dimension table, the entries is equal to the number of entries on that URL. I understand the mechanics behind why this is happening, technically each occurrence of URL = xx did have an entry, but that's not the entry I'm looking for if I'm using a hit-based segment. This behavior feels off to me and I'm wondering if (aside from creating my own bounce rate metric that doesn't rely on entries) there's a solution or workaround.

By @amandadeasy  and @chrismdavis  Migrating Adobe Analytics and Target implementations to Edge Data Collection simultaneously is key to streamlining your setup and ensuring consistency across your Experience Cloud solutions. In previous blogs, we discussed the value of using the data object when implementing Edge Data Collection for Experience Cloud solutions, including Adobe Analytics. In this post, we’ll dive into using the data object to migrate mbox parameters for Adobe Target. For a complete step-by-step guide, check out this Web SDK migration tutorial for Target.  Recall that the data object allows you to implement Web SDK without using an XDM schema. For Target, this approach also provides a flexible way to configure and pass mbox parameters without additional mapping, making implementation and validation even easier!  Creating the Data Object  Before you begin, ensure that your datastream is enabled for Target. If you haven’t already set

Hi,I want to know if there is a way to track site speed in Adobe Analytics. I saw this question, but the Adobe plug-in: getPageLoadTime is no longer supoported, so I want to know if there's another way to track itThanks!

Hi Team, Recently I have faced a issue regarding cross domain tracking when user click on login which is added as button without anchor tag href.  I have implemented appendVisitorIDsTo method and it will works fine when you link is having href but when user click on button which will not have anchor tag and href in this case Implement a robust cross-domain tracking solution using Adobe Analytics (AppMeasurement.js) where tracking parameters are appended to button URLs through the backend system.This ensures consistent visitor identification across multiple domains. I have worked with back-end developer and added the AppMeasurement.js and VisitorAPI.js script on head section so that when user click on button it will appendVisitorID and set it on next redirection URL so that when user lands on page it will add the visitors id in landing page and visitor it will not get changed.With this solution visitor identity is maintained seamlessly across domains, improving attri

Hi, I am trying to implement in Java an Adobe Analytics 2.0 client using open api client generation with this definition  https://adobedocs.github.io/analytics-2.0-apis/datasources.json I need to use the POST JOB endpoint to upload a data file to an existing Data Srouces account. My issue is that I cannot find a way how could I provide the data file to the endpoint createJob. I believe there's an issue with the above api definition for the data sources because also in the swagger page there are errors: Go to  https://adobedocs.github.io/analytics-2.0-apis/?urls.primaryName=Data%20Sources%202.0%20APIs Select a definition : Data Sources 2.0 APIUnder JOB definition there's a POST endpoint that doesn't work (there are also errors in the console). Am I doing something wrong? Did anybody face this issue before?I'm trying to achive this: https://developer.adobe.com/analytics-apis/docs/2.0/guides/endpoints/data-sources/#post-data &nbs

We're currently building a couple of prototypes for CJA as we start a migration from AA.  I have set up the Web SDK calls, and can see data being sent into the data set.  I've then set up a connection in CJA and I can see that data is being pulled in (when doing Derived Fields I can see values in there). But my Workspace isn't showing the Data View in the drop down.  What would cause Workspace to ignore a Data View? As part of the prototype work I've set up two other data views in the exact same way, and they are both available.  It's just the most recent one that isn't. Any suggestions?

Hi , i want to see if the metrics gets any value or if the value is zero till the end of the daycontext is we have an email free form table which has open delivered clicked metrics with few delivery ids i am monitoring these metrics if the data si flowing or not sometime the data is not flowing till 9pm everyday so i am frequently checking if the values are captured , now i want to create an alert which give me an email if the value is zero till 6pm and another alert saying  if the value is flowing like 1 or 2 it should give me an alert 

Hi guys. Im trying to connect Adobe Analytics with a site. When I click on the site and then click on button "activate adobe analytics" i get the following error when trying to submit the form:   I've tried to do this for different sites and always the same thanks in advance!

Should the operating_system_type dynamic lookup contain a record for each OS value in hit_data?  We are seeing some OS values in hit_data that are missing from operating_system_type.

Hi all, Is there any option to share the data warehouse reports to other users such that it will be visible in their data warehouse list as well? Just like the projects in the workspace. Thanks.

Hi,I am looking to pull a report on first-time page visit in Adobe Analytics.  What filters do I use to pull that data?Thanks