Adobe Analytics

Subject: Guidance on Implementing SPA Event Tracking in Adobe LaunchDear Team,I need to implement Single Page Application (SPA) event tracking in Adobe Launch. My question is:Should I implement it using a Direct Call Rule, as shown below?_satellite.setVar("digitalData", JSON.stringify(digitalData)) _satellite.track(identifier)Or should I use the Adobe Client Data Layer Extension? by using event push with event_info.Please provide step-by-step guidance on the best approach.Best regards,Kamlesh

Hi - I am following the below documentation for setting up an API connection from CJA to PowerBI using PostgresSQL. I am using the expiring credentials for now to test what I want to see in Power BI before setting up the non-expiring credentials. When I try to connect the PostgresSQl to PowerBI, I keep receiving this error. My credentials are not expired. Has anyone received this same error message? If so, can you please provide what steps you took to troubleshoot? I have tried to troubleshoot myself and have not been able to figure out what to do.  

Hi everyoneI need to clarify the difference in criteria between BOUNCE and SINGLE PAGE VISITS metrics in the Dimension component in Adobe Analytics.According to the Components Guide:The BOUNCE metric is defined as "the number of visits that contain exactly one hit." However, it is counted as SINGLE PAGE VISITS if link tracking calls are executed during the visit.The SINGLE PAGE VISITS metric is defined as "the number of visits where the page dimension did not change throughout the visit."So, for exampleWhen examining BOUNCE and SINGLE PAGE VISITS values by date:BOUNCE: Refers to instances where someone landed on a page via an ad or organic link but subsequently left the site without generating any additional hits.SINGLE PAGE VISITS: Refers to instances where, after landing on a page via an ad or organic link, the user reloaded (refreshed) the page, clicked on an external tracking link, but did not navigate to another page within the same site.If the above hypothesis is correct,For exam

Good afternoon, I have been shared some projects, when I enter the “Projects” section I can indeed see the list of projects. However, when I try to access the projects I get the following message: “You do not have access to the report suite this project was saved in. Please select another report suite.” What is the reason for this error? Thanks!

I created the "Pages then Pages" segment, but why does it show only one page when I break it down by Pages after filtering by Visitor ID?From what I understand, since it's a journey involving two pages, there should be at least two page views, so this seems strange...What I wanted was to calculate the stay time for "Pages then Pages," but when I just look at the Visits, it only shows one page when broken down by Page, which seems odd.Also, could you explain the difference between Time Spent per Visit (seconds) and Average Time on Site? 

By : Prachi Jain & Luc Forgeron Introduction  Adobe Journey Optimizer (AJO) is a one-stop solution for managing all marketing campaigns, messages, offers and personalization automation. Through this blog, we are delving into the concepts of how and when to trigger in-app messages in your mobile application through Journey Optimizer. We are also going to explore using the in-app messaging channel to effectively engage with your audiences and direct them to key features of your application.  One of the most frequently asked questions is about the differences between in-app messages and push notifications.  In-app messages are inbound notifications that appear within the app while a user is actively engaged with it, and the decision to show the message is made based on app usage.   Push messages are outbound notifications, meaning the decision to deliver the message to a client is based on a decision made at the server. The end user may or may

Hi All, Are there any ways to delete the unused report suites in sandbox access? Regards,Srividya.V 

https://www.softcrylic.com/blogs/adobe-analytics-for-target-a4t-a-look-under-the-hood/I found this article and found few columns which are useful, however does the click stream have a column for name of expereince instead of the code ?also I found that for some users tnt_action has two exp id in a hit, any way to clean this upend objective is to create a dashboard with drop down to select relevant exp and see the results

When I am multiplying Visit x Conversion rate there -.2% discrepancy against Orders? Does anyone know why this would be happening? 

So I am looking to use Microsoft Power Automate to refresh Adobe API Credentials every 13 days to mitigate a Power BI Refresh Failure every 2 weeks. Is this possible? Ive done the following steps, but it appears it doesnt work successfully when the credentials actually expire.Steps to Automate Adobe API Credential Refresh with Power AutomateUnderstand the API Requirements:Check Adobe API documentation for how to authenticate and refresh tokens. Typically, this involves sending an HTTP request to an authentication endpoint with necessary credentials (e.g., client ID, secret, and refresh token).Create a Power Automate Flow:Log in to Power Automate and create a new flow.Select a "Scheduled Cloud Flow" to set a recurring schedule.Set the Recurrence Trigger:Set the flow to trigger every 13 days. Use the "Recurrence" action and configure the interval accordingly.Add an HTTP Action:Use the HTTP action in Power Automate to send a POST request to Adobe's API authentication endpoint.Include

I have a dimension that gives me search queries, most of which are one word ... but I want to find all those that are 2 or more words.I used segment builder to create a filtering on "contains" for " " and ' '.The end result is the system delivers only queries that contain either ' or "  - interesting that this exists but absolutely not what I wanted.Any ideas????

Hi Team,I have a Data Feeds Job which is moving hourly to SFTP server & from there to a Data Lake.We are seeing the data land as a string but in unicode format like below, is there any config on your end that would make this a regular string?"\u0006\u001b58\u001d�H�4;5;�x{HJ�0aQ�O-\u0002�n��\u001e'=s��\u0016\u0014ղ*7ӥV\u001bJ�\u0019,¯h?If not, Is there any alternative we can use to make data in regular string.Thanks!

Hello everyone,I want to check if Adobe Analytics also support Deviations or BackAndForth of event sequencesLets suppose I have sequence given as ->  A, C, B, C, A, DAnd I want to create segment of A then B then C then Dwill the above sequence be satisfied with this sequence for below?1. Without providing any Conditional Operators for all then operator2. Using Within OR After Conditional Operator for any or multiple then operators

I've worked on a couple of Adobe implementations and with the tool itself for a number of years, and I don't recall ever seeing something like this. Instead of showing me zeroes where no data/counts exists the rows themselves are blank. What causes this? Is this normal?

As of June 7, 2023, improved Bot Reporting is now available in Workspace. Adobe has now introduced a ‘Bot name’ dimension shows the names of bots that were detected using Bot rules. These rules can be default IAB rules, or custom bot rules that your organization configures. It is helpful in cases where you want to learn more about what bots are visiting your site, or which bots generate the most traffic.  The Bot Name dimension is an Adobe provided component. Using the Bot Name dimension, you will see the names of the bots detected or custom bot rules supplied. Bot Name should only be used with Bot Page Views and Bot Occurrences. If this dimensions is used with any other Analytics metric, no data will result because it is unassociated with normal customer-based data in Analytics. Data processing for Bot Page Views began between February 26 and March 10, 2023; as a result, any reporting window prior to this date will not have data. The Bot Page Views metric shows the number of

Hi there,I'm trying to build a filter in CJA where the attribute is checking for the date in last 6 months, but we don't have "In last" as a preset in CJA. When I tried to build a component in dataview, we don't have the feasibility to use this option either as it only allows hardcoded dates under the Include/exclude values.P.S the snip of the same.We can't use date range either as date ranges work on the out of the box timestamp attribute and we need to check the date of our custom attribute in last 6 months.Please let me know if there's any workaround for my usecase.  @arunpatidar  @davidkangni 

I would like to create a segment for the previous 4 weeks, but that adjusts based upon my date selection and isn't tied to the current date like the screenshot of the Date Range setup below. So if I select the first week of December 2024, then it would return the 4 previous weeks in November. Is there any way to accomplish this?  

I am trying to get unique visitors data from PBI connector. The problem is the data is correct only at the granualarity at which the data is being pulled (say daily). If I sum it up at the monthly level it leads to a lot of duplicates. What is the best way to get this data from PBI connector. Getting data at visitor id level could be too much? 

What is the difference between average time on site and average time on page if we're just looking at 1 page url? I see slightly difference in the time for each metric, so I want to understand what's the difference between what the 2 and what are the use cases? Average time on page makes sense but I'm confused on average time on site. Based on the definitions, to my understanding average time on site = (total seconds spent)/(# of sequences)average time on page = (total seconds spent)/(# of pageviews) 

Our company has switched from Adobe Analytics workspace to Adobe CJA workspace. Since using the workspace I am seeing there are a lot of metrics/dimensions either replaced or missing. Example 1: There is no longer "Visit" available, we now have just the "Sessions".Example 2:  We now don't see the "Exit Page" dimension.These changes are affecting our reports. How can we add these metrics/dimensions back, or are there alternative solutions to get the same insights?

I want to count the number of visits to our site that begin with items already in cart from a previous visit. The logic would be something like: count(visits) IF[visitor(cart additions>cart removals) AND visitor(orders=0)] I have all of the necessary metrics but I can't get the logic to work in either segments or a calculated metric.

I'm trying to understand the best approach to export analytics segments tied to a specific identifier, most likely a value within an eVar. I'd like to be able to pull this as a daily feed into an external data lake. The data feed looked promising, but I didn't see segments as an option within the columns. Would the Segment API be the best approach?

Hi, How do I look at for a given page (for both visits to it and strictly visits where an entry happened to it) how do I look at the Average Time on Site for each page (both visits to them total and separately look at only entries to those pages for the time on site (Whole visit)? Thanks!