Hello Howard,Thanks for ur response. All I am trying to do is to get the
logged in user info and compare it with a hiddens field in my form and
set the other fields enabled or disabled..I tried making changes ro
render service but never sucessful as it return only the originator
value..Pls help me out with this~Thanks
Ok I have a question -I have created a two variables and two text fields
in my render service called userIDname and testValue. when I render the
form for the firt time teh userIDname gets prepopulated which is fine.
when I go to the next stage I want the testValue to be populated with
the second stages users value...if I furthu g to the third stage the
testValue shoul have the user who loogied in the third stage.So what I
have done is I have added another setvalue (which goes to the second
time ...
Jasmin,Thanks for ur response. But it has become quiet a bit difficult
to serach in this new forum ! I tried to search with the keywords (
Login user ....) and tried to get discussions..but it would never retun
any post from workbench when I try to filter the search..Ok I found this
thread herehttp://forums.adobe.com/message/1930778 but what I need is as
followsI have created a two variables and two text fields in my render
service called userIDname and testValue. when I render the form for the
...
hello Everyone,I have a question in adobe workbench - how can we get the
login information of the user in workspace?I have a workflow where I am
prepoullating the data of the originator but I also need teh infomation
of the users who login in the subsequenst stages My question is if i
Mr.A logins in at stage1 then we need to get his name (alias/id
anything) and if Mr.B logins in in the second stage then we need to get
his information...How can this be done? Please help me out.Thnaks in
advance !...
Hi all,I am trying to use the email service -send document with
attchmnets. I have given the configuration details. If I hard-code the
Email address in the 'TO Address' then an email will be sent out..which
is fine. The next user stage is a Xpath expression ( ie., initial user
selection is xpath). How do we save list of email address and assign as
an Xpath expression in the send email with attchments service?Please
suggest Thanks in advance.
Hi all,I have a question in search templates. I see that in the search
template in administrative console under Home > Services > Live Cycle
Workspace ES > under criteria tab.. there is this process variables...
But I dont see anything under this?Is it possible to add something from
my process (variables from my process) to this.For instance I need the
user to search with a primary identifier in my form called Key number. I
have this stored in my process as a variable. How can I get it in the
se...
Jasmin,ThanksNow, how should a group get an email? unless someone in the
group claims the task they dont get an email 🙂 but this should not be
the desired result. once a task is assgned to a froup they neeed to get
a email. Hwo can this be achieved?
Hi Jasmin,Thanks for the replyI don't see task notifications under
server settings. Under server setting I see Email settings.Under email
settings I see different tabs like 'stalled operations' 'task
notifications' 'task deadline...
Hi all,i am using Livecycle 8.1.I have the same requiremet as Eric.
sending task notification to Group.In administration console I clicked
on Services -> Live cycle process management-> server settings-> Email
settings -> and in task assignment tab i only see this option -Send an
email to the user for new task assignmentsThis assigns task only when we
have the task assigned to speciic user, but not a Group. How can we
assign it to a group?Thanks in advance.Pelase help me out with this!
Hi Deepak,I have the same situation. Please let me know once you get the
option #2Please bear with my question !!Also in the workspace we have
Tracking and in that we have the Audit tab. is there soemway we can get
it to our form and we can have the history of the workflow?Tahnks in
advance.
Thanks Jasmin. I got the deadline to work.My question now is, for any
sinlge action, the form goes to one user ie if manager hits on approve
action, the form goes to next stage where employee can see it.But, in my
case, I need both manager and to the employee to see it.How can we get
one action to perform two tasks?Thanks
Hi Scenario - An employee fills a leave form submits to manager.If
manager approves it it has to stay in their(both of their) to-do list
for sometime and then goes automatically to other user.I cannot have
them in the same Group since this would mean one group for each
manager-user pair.My question is how should the task stay in both of
their to-do list?what should I specify in inital user selection. Thanks
in advance
Hi all,I have a situation where we want to make the form readonly in
subsequent stages.Let me put it this way-In my process the user1 will
fill the form and hit on complete button. the user2 opens the form but
the form should be readonly to the user2. He should have a action button
at the button called Edit and when hits on the action the same form pops
up and the fields are enabled and he can make modifications. Th form
goes to User3 and the form should be again readonly with same edit
button a...
Thanks jasmin - Got it done finally. Used a condition to determine who
has logged in first stage and in the subsequent stages only the data
will be paased and the render service will not be invoked.
Hi Jasmin,Well I tried that before and the form doesn't get opened in
workspace in the next stage and I get the following error. (Processing
importData operation on source document and malformed PDF or data)
Thanks a lot I will send the lca file. thanks in advance for taking a
look at it and helping me.2008-12-12 11:35:00,322 INFO
[com.adobe.workflow.AWS] Invoking action synchronously2008-12-12
11:35:00,338 ERROR
[com.adobe.livecycle.formdataintegration.client.ImportFormDataException]
ALC-FDI-00...
Hi jasmin,Thanks again. I am using 8.1 version and do not have the
record and play back option. I am using the xfa data variable and the
form is XDP. The data is getting prepopulated but the other data is not
being passed. i cannot move further unless this is fixed. May I have ur
email address so that I can send you the lca file.Thaka a lot for ur
help.
Hi Jasmin,Thanks for your response.I get the following error when i try
copy the data.2008-12-11 17:33:07,801 INFO [STDOUT] Dec 11, 2008 5:33:07
PM com.adobe.idp.event.notification.NotificationManagerImpl
deliverNotificationToServiceSEVERE: Notification could not be delivered
to registered subscriber. Reason: Internal error.2008-12-11 17:33:07,801
INFO [STDOUT] Dec 11, 2008 5:33:07 PM
com.adobe.idp.event.notification.NotificationManagerImpl
setNotificationDeliveryFailureINFO: Attempting to disab...
Hi all,I have tried to prepoulate data( The first and last name of the
user)on to the form using the form render service. I am invoking the
render service in the initial stage when user opens the form. So for the
main input form in the advanced setting I am using calling the render
service. The problme is the data(users first and last name) is getting
populated but when I fill the form and pass it to the next stage there
is no data on the form except for the next users first name and last
name w...
Jasmin, Thanks for your quick response. I have created a variable called
docs of type Document But where should I mention the document which need
to be attached. In attachment(variable) I selected variable from drop
down and gave docs there. But I get the same error. Also in
administration console do we have to add the email endpoints?what I see
now is EJB,SOAP,Remoting and taskmanager. when do we add the Email
endpoint?Thanksyou very much.
Thanks for the response.here is the error which I get when I send email
with attachmnets now. I have given the IP address of the SMTP server
which we are using.the error is. I am not sure of what to give in the
attachments.I have a form which we use in the application but not sure
how to send it as attachment.java.lang.RuntimeException: Attachments of
type:class
com.adobe.idp.taskmanager.form.impl.xfa.XFARepositoryFormInstance are
not supported
HiI am having problem sending email alerts to the users. The email
settings is configured in the administration console.When I use the send
email with attachmnets option I get the error -
'java.lang.RuntimeException: javax.mail.AuthenticationFailedException'-
what does this mean?I have hardcoded my email address in send options
and checked the connection settings option as the email settings was
done in administration console. Please help me out with this.Thanks!
Hi,I have a similar situation. depending on who is logged in the
workspace one section of the form must be enabled and disabled -for
instance user1 is logged in he fills in the form with the section
disabled and sends the form to user2. User2 will see all the data and
will have the section enabled performs some action and sends the same
form to user1 user1 will see all the data along with the section that
was filled in by user2 but that will be disabled. . How can we do this?
Do we have to write...
Hi Jasmin,Thanks for your responnse again.I am using the following
variables in form to render processfirstname- stringlastname-
stringformurl-stringform_to_render-stringoutformdoc-documnettargeturl-stringurlspec-
Urlspecuseragent-stringuserid-stringxmldata - xml. - I am saving the
firstname and last last in the xml data element.Now, I am using this
process and invoking this in the main process. There i am usng the
following variables.abcd_doc- xfa form - In the Templete Url
/ABCDforms/Forms/Abd...
Hi jasmin ,Thanks again. I did change it to documnet form and I get the
same error. By mistake I mentiond as documnet in my previous post, But i
did change the variable to document Type.Thanks again!
Hi Jasmin,Thanks for your reply. I have changed the variable type in the
main application from xfa to document type as suggested. But when I try
to open the file in workspace I get the sameerror. but in the error log
the error is as followsINFO [STDOUT] [Flex] Error handling message:
flex.messaging.MessageException:
com.thoughtworks.xstream.mapper.CannotResolveClassException :
com.adobe.idp.taskmanager.form.impl.xfa.XFARepositoryFormInstance : No
ClassLoaders found for:
com.adobe.idp.taskmanager...
Hi all,I am a newbie to adobe livecycle process. I am trying to
prepopulate the data like the users info when the form is originated in
the workspace.I did use the samples example for form render service but
added to variables called first and lastname as i want these fields to
be populated.I am also using an xmlvariable which stores the xml
data-(first name and last name) from the form (i got the xml data from
the jDBC service usingquery multiple rows by quering edcpricnipal
entity). I have fol...
