We are using AEM 6.3 We wanted to integrate S3 bucket with 2 AEM
instances and share Assets across both the instances.But that is not
working for us.Steps:1. Added configuration in one AEM author
instance.2. Logs ensured that data store synced with S33. Tried to
retrieve one image, logs showed the image is downloading from S34. Now
configured another AEM publish with S35. Tried to pull one of the images
from publish - This is not being pulled from S3Few questions/points:1.
From forums I got mult...
Thanks for responding.The main reason that i found out was if we use the
jar parallel to crx-quickstart folder - then I see the AEM starts off as
http://localhost:4502/crx-quickstart/aem/start.htmlIf the jar inside
/crx-quickstart/app is used then AEM starts off fine.Not sure why that
difference.Adobe document- says use the jar that is sibling of
crx-quickstart but that introduces the extra crx-quickstart for
me.Performing an In-Place Upgrade - Determining the correct upgrade
start command secti...
AFter running these 2 commandsjava -Xmx4096m -jar AEM64-author-p4502.jar
-unpackjava -server -Xmx4096m -XX:MaxPermSize=256M
-Djava.awt.headless=true -Dsling.run.modes=author,crx3,crx3tar -jar
AEM64-author-p4502.jar start -c crx-quickstart -p 4502
-Dsling.properties=conf/sling.propertiesI see the AEM starts off as
http://localhost:4502/crx-quickstart/aem/start.htmlIf you notice the url
has an extra crx-quickstart. WHy could that beD:\6.3 - 6.4 upgrade with
curl cmds\crx-quickstart\app has
cq-quic...
Thanks.But another concern is when I used below commandjava -server
-Xmx4096m -XX:MaxPermSize=256M -Djava.awt.headless=true
-Dsling.run.modes=author,crx3,crx3tar -jar AEM64-author-p4502.jar start
-c crx-quickstart -p 4502 -Dsling.properties=conf/sling.propertiesAEM is
starting as http://localhost:4502/crx-quickstart/aem/start.html Why is
the extra crx-quickstart coming up?
We are upgrading from aem 6.3 to aem 6.4And performing in-place upgrade
following these steps - Performing an In-Place UpgradeI want to clarify
on the steps to get this successfulStop the instance if it is
runningDownload the new AEM6.4 jar file and use it to replace the old
one outside the crx-quickstart folder.Unpack the new quickstart jar by
running:java -jar AEM_6.4_author-p4504.jar –unpackjava -server -Xmx1024m
-XX:MaxPermSize=256M -Djava.awt.headless=true
-Dsling.run.modes=author,crx3,crx3...
We are using aem 6.3I have a bunch of Sling models under com.client.core
and com.client.brand.core packagesMy Pom.xml is having this
configurationcom.client.brand.core,com.client.core,com.client.config.modelproblem:
I am unable to see the sling models of com.client.core and
com.client.config.model when <>/system/console/adapters;
but sling models of om.client.brand.core are showingWork around: When I
change the order of packages listed under Sling-Model-Packages, it
works!New order:
com.client.c...
Sorry I lost this thread.Hero - AEM content component with Sling
modelPanel1- Content FragmentPanel2 - Content Fragmentis there anyway by
which Panel1 and Panel2 paths be added to hero component? Such that Hero
component Sling model can read data from these content fragments and
construct the JSON?Is this possible?
But the other most important problem. Even though I am getting 200, the
replication agent- Transport handler is not getting invoked.What am I
missing?I have the replication agent upo and workingBundle for Transport
handler is there.Path and cmd params are passed.I am getting 200Is there
any other URI I need to hit?
yes I did set it up.I had to make 2 changes oin osgi1. disable csrf for
post request2. Apache Sling Referrer FilterOnce I did these 2 then it
started working. Did you make these changes?How to make a simple HTTP
POST request to AEM with a HTTP Rest Client, Postman - Sourced Code
Hi,I have custom replication agent with transport handler to invoke some
REST API.From AEM when I Activate/Deactivate any page - things work
well.Issue:I want to invoke the replication agent/transport handler on
author instance from a HTTP request from postman. is that possible?My
goal is to perform a performance run with that HTTP request.Different
trails
made:http://localhost:4502/etc/replication/agents.author/solragent.test.html
-> this would only work on GET and only path is
/contenthttp://l...
Okay so what I am getting is:Experience fragments is a group of AEM
components.I cannot associate Experience fragment as such with any sling
model like I do for AEM content component.This is noted.How about
Content fragments?1. I have a content fragment - panel1, created backed
by content fragment model2. On home.html I will have Hero component and
COntent Fragment component.3. Content Fragmnet component will browse for
panel14. Is there any way Hero sling model can read panel1? Or panle1
path c...
Using experience fragments - No I am not getting. I am not sure how I
use experience fragments in this use-case. Thats the #1 under issues
that I described.I have my home.html -> I added Hero component and 2
Experience Fragment Component. Each of the experience fragment
components has the panel information which needs to be read in SLing
Model of Hero.How can I do that?
Yes JCR Data.1. What I am doing currently is.2. Hero component browses
say 2 panel page paths.3. Each of these components have their respective
Sling Models.4. In Sling Model of Hero, I get the Panel Path that is
browsed get the sling model of Panel component and finally return the
JSON from Hero component.
Hello,We are using AEM 6.3Problem Statement:1. I have a content
component - "Hero" on an AEM page - home.html2. Hero component browses
Panel component pages - which means, AEM page with Panel Content
Component.home.html (with Hero) -> panel1.html -> panel2.htmlProblem is
how to use experience fragments here for #2.Proposed Solution:Instead of
using individual AEM pages for Panel component.Use experience fragments
instead.My Attempt:1. I created one experience fragment with Panel
component.2. Tri...
Okay, if I understand correctly steps would be:1. create an event
listener for activation event2. add custom code to replicate required
replication agents in the given order as per your code.3. SO now,
whenever any file is activate-> triggers event listener which will
decide which replication agent to invoke.Is this the flow?
We are using AEM 6.3My use case:There are totally 3 replication agents
in my scenario1. On author, I have 2 replication agents2. One for
activating the content to publish instance3. One agent to purge Akamai
Cache.4. On publish there is one replication agent to flush dispactcher
cache.Issue: I want to activate Akamai Cache purge ONLY AFTER flushing
dispatcher cache. So on author, can I trigger Akamai Cache Purge Agent
only after the content gets activated on Publish instance? Can I do
that?Note:...
Yes. Currently the way you explained concern#2 is the it works for the
URL pattern I gave.My Observation is for this URL ->
../upfits/vehicle.html/2/abcdef -> the dispatcher is returning
vehicle.html and the rest of the url is ignored.For this URL ->
../upfits/vehicle.html/1 -> the dispatcher is returning vehicle.html and
the rest of the url is ignored.When I say dispatcher is returning, Yes
IT DOES NOT hit AEM once vehicle.html is cached in the dispatcher.This
is what is currently happening to ...
I understand your points. I have 2 concerns nowBut on your #2, currently
vehicle.html is cached as a file.Concern1 : If dispatcher checks only
the element after the last slash, how is that vehicle.html is getting
cached as a file currently and subsequent requests are returned from
dispatcher. It looks as if it is completely ignoring the strings after
vehicle.html. How is that happening? No matter what strings I have after
vehicle.html all of them are ignored and those requests are served from
di...
Hello,We have a URL pattern as below. The strings after the .html in
below link are added by client side code - React Routes.These strings
after html are all dynamic and based on user's interaction with the
application. There could be a maximum of 5 strings that can be added in
the URL based on user's
interaction...../guide/upfits/vehicle.html/2/abcdef/summaryRequirement
is: Since the page vehicle.html does not change with the values of the
strings we want the HTML to be cached in dispatcher. We...
Thanks for responding.My use case is ,1. The only way these nodes get
changed is from the back-end Java code.2. If the nodes are not present,
the code creates them and adds the relevant content.3. If the nodes are
already present, code simply updates the jcr:data property of the
node.So if I have to manually set is this the best
approach?jcrNode.setProperty("jcr:lastModified", value);Can you let me
know how I should populate the value for this case?I see the current
value is 2017-03-22T22:50:32....
Hi All,Use Case 1 -> Programmatically I check if a node exists from Java
and if exists, I update jcr:data property of the jcs:content node.Just
to give you an idea node that gets modified programmatically is
/content/fca-brands/na/ramtrucks/en_us/data/product_data/2017/jsons/accessories.js/jcr:contentUse
Case 2 -> I got to CRX DE Lite and update some property on jcr:content
node. In Both cases above, if I go to this file accessories.js for which
jcr:content node I updated and check the time stam...
Hi,I created a sample component with Dialog for Touch UI and Classis UI.
Both work fine.Now I created a node cq:design_dialog and copy the same
content as cq: dialog.It is not working.I created a design dialog for
Classic UI and that is working fine in both Classis UI and Touch UI. Am
I missing something?
