Campaign Classic v7 & Campaign v8

Hi,I'd like to configure Adobe Campaign so that all addresses from a specific domain are authorised to send mails (so essentially I want <%= recipient.firstName %>.<%= recipient.lastName %>@domain.com to be authorised to send emails). How do I configure the 'Authorized masks for the sender address' to allow an entire domain rather than defining specific single addresses?Thanks in advance

I'm looking to create a daily report with a overview of email delivery metrics (i.e sents, opens, clicks). Is there an option to create an automation to export this data?

HiI want to know the difference between difference between instance.vars.someVar and vars.someVar.

Hi,I have a campaign Delivery setup. When I ran the workflow, everything ran fine but Delivery status is showing as Personalization Pending. What could be the reason for this and how to fix this.Thanks,Saurabh

Is there a way to pass a generic sms message back to users if respond via SMS is other than standard response (STOP, QUIT, HELP)?We are handling the automated response via external account definition.

var query =  <queryDef schema = "temp:enrich32" operation="select">                             <select>                                 <node expr="@firstName"/>                            </select>                            <where>                             </where>                    </queryDef>var condition =   <condition boolOperator="AND">                            <condition>                            <condition boolOperator="OR" internalId="0" expr="@gender = 'M'"/>                            <condition boolOperator="OR" internalId="1" expr="@gender = 'F'"/>                           </condition>I want to add the condition into the where in query in a javascript activity.

Hello,We are using the Recipient table to store the customer attributes and also created a custom table to store several customer extension attributes. This is a 1:1 relationship.I'm trying to insert records into the Recipient and the Custom table in a single workflow. Is this possible or do i need separate workflows for each Target dimension?Any other suggestions on how to insert records into Recipients and the Custom table??Thanks for your helpSree

I use Adobe Campaign at work to create newsletters.  I want to make a PDF of each newsletter which still has all the hyperlinks intact and clickable so that I can post these on our website.  Everything I try either messes up the format or removes the hyperlinks.  Since this is an Adobe product, I'm sure there's a simple way to PDF these newsletters.  I don't know what "Adobe Campaign Classic" is but what I'm using is just called "Adobe Campaign."Any suggestions?

This is a discussion space for a whitepaper I'm putting together on the approach to best practices in implementing SMTP unsubscribe headers in email deliveries.

Hello, we have a list of email addresses for which we need to check the total number of email sends, clicks, opens, unsubscribes etc.The delivery information is stored in the Recipient Delivery Logs table and the tracking information is stored in the Recipient Tracking Logs table. Please advise.

Hi I'm trying to build a report table (Qualitative distribution) where I can see something like this: Email numberOpen RateClick Rate1st Email recipient is sent20%5%2nd Email recipient is sent26%3%3rd Email recipient is sent23%4%The content and date of the Email is irrelevant... as the user receives different content depending on DOB and other fields when they sign up. Simply, I'm interested in seeing engagement behaviour from the day the recipient sign up.Can anyone help with this? I've tried building the report using the Recipient tracking log schema, and adding Count([delivery/@id]) as a variable but the report fails

We are currently implementing the CRM connector between v7 and MS Dynamics 9 on prem. Microsoft is asking whether or not the API will handle multi-threading. I can't find any documentation around this and none of my contacts at Adobe have been able to answer this question. Any forum Experts or Adobe Staff that can answer this question. This is time sensitive as we are Architecting the solution with them now.

Hi everyone,Is it possible for workflow to write different channel value to BroadLog from chosen one?For example there is workflow with SMS delivery but we want to be written as Email in BroadLog (channel value). I assume that there is a way to do this with javascript node but I cannot find that variable/parameter.Update broadlog after workflow is finished is not an option, there is need to automatically write a specific channel instead of chosen one.Thanks

Hello all,I'm here to ask you how may I develop an input form having a variable number of fields.Here my use case.The data schema related to the form would have multiple records associated to the same product and differs for the campaignEs: MyTable (cus:myTable)<Product code, Campaign internal name, isSelected>product001, OP1, falseproduct001, OP2, trueproduct001, OP3, falseproduct002, OP1, falseproduct002, OP3, false...on the other hand the input form should have a single view for each product and let the operator see the campaigns the product is associated to and let him/her select it through a checkboxEs: MyTableForm (cus:myTable)If the operator select record product001, OP1 he/she should see these input fieldsOP1 OP2 OP3 Leaving aside the soap call, could you kindly explain me the syntax I would use to develop this solution since it's dynamic?I would be very grateful for this!Vapsy​ Adhiyan C​ florentlb​ Amit Kumar​ Jean-Serge Biron​ Ananya Kuthiala​ Debabrata.T​ Adobe Cam

I am setting up a new environment and having issues with delivery. None of the delivery is completingWhen an workflow is creating a delivery, the bulk external delivery (new routing using Delivery Mode = External) or email delivery (using OTB routing for email) is coming as “In preparation(target ready)” with Pending Approval as expected. Then once it is approved the status is changed to “Extraction Pending” for External delivery and for Email Delivery, it is initially “To Approve” and then once approved, it is getting into “Preparation pending” state.In the Target tab of  Delivery, I can see 2 recipient records are sitting with Reason = "not defined". In the delivery audit, the last log is "06/02/2019 6:22:05 PM Analysis successfully completed in 0s (2 message(s) waiting)."No error in web, mta or any other log file. So not sure what is happening.No data is inserted into the BroadlogRcp table either. I used few proofs, and I can see them in the broadlog table, but nothing from the actu

Hi all, I have something rare with some deliveries, for example this delivery : The emails to send is 16, but processed number is 20 and succes is 19, which is completely wrong, after getting inside the delivery log i notice that the number of processed should be 16 and succes should be 15 : But, after i do a recompute of the delivery, using the "recompute all from the elementary tracking logs":the datas come back to normal.my question here is if there is a way to update those datas, using a workflow that get executed automatically everyday for example? Thanks, Badr.

The documentation mentions the following:An offer space is not a communication channel, it coincides with a specific exposition location on the channel. For example, offers exposed on a website can occupy two spaces on the same page. In this case, we will then have two spaces for the same channel.Is this true only for Inbound channels? The deliveries for outbound won't allow you to select more than 1 Offer Space and therefore the only way to use the offer twice on the same delivery is repeat the script twice. For example using the following tag 2 times in the HTML:<%@ include proposition="proposition[0]" view="rendering/html" %>Could someone confirm if the highlighted statement above is only for Inbound Channel? If not, then how do I use 2 Offer Spaces with the same channel in the same delivery?Thanks.

Hi team,How to get month from $([vars/From_Date])) in reports while filtering query.I tried Month($([vars/From_Date])) ,but getting error while using this function.

Hi guys,Is it possible to Query a schema, send it to a Javascript to apply a <where> condition and then return the schema result, therefore send it to another flow activity? I have tried it without result.Here's my jsquery = xtk.queryDef.create(   <queryDef schema={vars.targetSchema} operation="select" distinct="true" noLineCount="1">     <select>      <node expr="@field1" alias="field1"/>    </select>    <where>      <condition expr={"@field1='" + localVar + "'"}/>    </where>  </queryDef>);resultSet = query.ExecuteQuery();return resultSet;

I am using the Out-of-the-box code to  create an open office document. The code is:var strXslt = "nl:dbdToOdt.xsl"var strTemplate = installDirectory("datakit/nl/dbd-template.odt")var strOutputFile = "/tmp/database-description.odt"var sql = xtk.sqlSchema.create()sql.Generate()var strDbXml = db = sql.toXML().toXMLString()var strOdt = applyXsl(strXslt, strDbXml)strOdt = strOdt.replace(/^<\?xml .*\?>\r?\n/, '<?xml version="1.0" encoding="UTF-8"?>\r\n')var mbContent = new MemoryBuffermbContent.fromString(strOdt, "utf-8")var zip = new ZipFile(strTemplate)zip.open()zip.setEntry("content.xml", mbContent)zip.save(strOutputFile)But I am getting the error: SCR-160012 JavaScript: error while evaluating script 'WKF6/js'. Element '0' unknown (see definition of schema 'Visitor delivery logs (nms:broadLogVisitor)'). Element '0' unknown (see definition of schema 'Recipient delivery logs (nms:broadLogRcp)'). Element '0' unknown (see definition of schema 'Visitor delivery logs (nms:broadLogVi

@Hello all,Regarding input form I'm wondering how may I remove "Add" and "Delete" buttons having a<input type="rightLinkList"> or<input type="linklist">elementI cannot use a different type since they don't list all the records of the related tableAdhiyan C​ Vapsy​ Jean-Serge Biron​ Adobe Campaign Classic​Any suggestion?Thanks,Salvatore

Hi,as part of workaround there is a need to record some recipients in BroadLog but without real delivery. So, I need some kind of passive delivery (which will not be executed like sending email, etc...) for workflow and incoming recipients  to be recorded in BroadLog. I tried with creation of new External account with delivery type = Description (this looks like a passive delivery) but that is not visible as delivery template later.Any suggestions?

What would be the best approach to recommend if a client has 300+ workflows running? in terms of performanceWhat could indicate if a client is running 300+ workflows on their marketing instance? poor implementation? lack of product knowledge?In terms of performance issues? whats the best approach to handle such load?At most, the max number of automated scheduled workflows I've seen running on a client is less than 100.