Campaign Classic v7 & Campaign v8

When clicked on "Salesforce CRM Configuration wizard", we see below error in logs:<faultString xsi:type='xsd:string'> SOP 330011 - Error while executing the method 'sfdcTableList' of service 'nms:extAccount' </faultString><detail xsi:type='xsiLstring'> -60 </detail>. Did anyone come across this error in the past? Any suggestions for further debug are most welcome. Thanks. 

Hi, I have installed the Adobe campaign classic. But when i try to send delivery, it goes to pending state. Also in the monitoring tab, i can see that my mta and Inmail in red says (missing process)Thanks,Pavan

Hello everybody,I have an external website that is running a survey. At the end of this survey, an email should be sent via an interface in Adobe Campaign Classic.For this purpose, a recipient should be created with the email addressa) receives a delivery via a workflow orb) Subscribe to a newsletterWhat is the best solution to solve the problem?

Hi all, we have noticed on workflow level a bad count in outbound transition when we send Email delivery to Prospects. This is usually case when personalization returns more values per one user but here we do not have personalization.On the picture, count of incoming records is 8.538 and count of outbound records is 69.670.080 after delivery node (Later on delivery level the correct number of user is targeted and notified therefore no need for any concern but this issue of wrong count is present only on workflow level).After analysis, we found that our broad-log table is extended with Account ID field which exist in Recipient table. For real company users this column is populated correctly, but for our prospects this column is set to 0. An Email node in workflow is generating provided SQL code below which returns square number of records where Account ID is the same.(ex. If you have in incoming transition 2000 records and all of them are with Account ID = 0 then outbound

Hi thereI am trying to troubleshoot a piece of JS code that controls the API endpoint in Adobe Campaign Classic. We have an external system pushing subscriber data using the API but recently we have been seeing a disconnection between the two systems, possibly because the parameters that the external system is passing through are incomplete, however the vendor insists all the data passed in the payload is correct. To check the data coming through into Adobe Campaign, I would like to log all the parameters in the API call for one day and then use that log data to validate the data in the external system vs Adobe Campaign. I am thinking of doing this by adding a logInfo() call in the JS code of the API endpoint. This is not a workflow by the way, it is the API endpoint code. The problem is I don't know where logInfo() saves the data for JS scripts. I have been looking around in Adobe Campaign and searching online but I cant find the exact locationOr maybe there are some sort of web

Hi All,We have passed the campaign id in the URL which we are sending in the email communication, so that we can capture  reports from Adobe analytics based on the campaign id. We are looking for OOTB metrics like Open,sent,processed,unique open, unique click, total bounce,unsubscribed based on specific campaign IDis it possible to get those reports in Adobe Analytics?When we tried we are able to get these metrics for delivery level and not campaign level. Can any one provide inputs on this? Thanks,Maheswari  

I want to send real time communications to customers by using message center. Is it possible to  Events will be triggered  through Adobe experience cloud triggers. I have experience cloud triggers configured for website.Please suggest possible way to achieve this requirement.Thanks!Virendra

Hello, Have you ever had to create a zip file in ACC that would contain multiple *.csv/*.txt files.  A client (who's currently getting migrated from SFMC to Adobe)  runs Exports weekly and creates seven (7) *.csv files. These files are then zipped into one file (ex: Client_Email_Send_2020_03_26.zip) I found some information online, and have already reached out to Adobe Support to see if I have have the necessary utilities installed on the server.  https://docs.adobe.com/content/help/en/campaign-classic/using/automating-with-workflows/general-operation/how-to-use-workflow-data.html#zipping-or-encrypting-a-file   I've also tried to use some information I got from Adobe Experience League and get an 'Can not open file.." error.  I've never done this in ACC before - especially since in ACS - you can choose to output the file as a *zip. Not sure how I need to proceed.  The *csv file output to a FTP (which I

Hi, When sending an e-mail, an intermittent time-out occurs at this log. Message preparation in progress... Do you know why there is a time-out at this log?If you know, please give me some advice on how to solve it or what to check.

Hello, I created a DM delivery activity and removed all the approvals except for enable extraction validation.  I only sent 100 records in a file from that activity and was able to confirm it was sent to the correct folder.  However the DM activty is still blinking blue, any idea what could be causing that? Thank you.

Hi,I need to store whole number which range exceeds than the allowed range of INT(long). There is an another option to use BIG-INT (int64) for the large range of values, but seems it will affect schema and instance performance and also consumes a lot of storage. I need to use int64 in some cases without impacting on instance and schema performance. Kindky help me to resolve this issue.Best Regards,Riyas

Hi all, we have noticed on workflow level a bad count in outbound transition when we send Email delivery to Prospects. This is usually case when personalization returns more values per one user but here we do not have personalization.On the picture, count of incoming records is 8.538 and count of outbound records is 69.670.080 after delivery node (Later on delivery level the correct number of user is targeted and notified therefore no need for any concern but this issue of wrong count is present only on workflow level).After analysis, we found that our broad-log table is extended with Account ID field which exist in Recipient table. For real company users this column is populated correctly, but for our prospects this column is set to 0. An Email node in workflow is generating provided SQL code below which returns square number of records where Account ID is the same.(ex. If you have in incoming transition 2000 records and all of them are with Account ID = 0 then outbound

Hi Team, Can you guide a method where I can generate a Alert to the operator if any custom made Typology Fails. I need to create a custom alert for that purpose, can that be triggered from Typology failure?Please advise. Thanks 

Hi, I'm trying to get some values from one schema and using them update the corresponding columns in another one.The workflow is built to first look for all records from schema-1 in query and as complementary information I'm passing column with ID. Then, in the next step - Advanced JS code, I use queryDef on temp:query to select ID from previous step and inside the loop for results I run another queryDef - this time I'm trying to get values from schema-2, based on ID selected previously. At the end, in the second loop I'm assigning values as "vars.example_variable". When I run the workflow, I can see that the values can be printed out to the console, however if I add enrichment after JS activity and then I'm trying to peek at data using "Display the target", these columns are empty. What should I do to get the values there? Thanks,Dominik

Hello everyone, I hope you are doing well. I would like to know if there is any way by which we can identify the mobile numbers that are in quarantine due to DND/ NDNC activated on these mobile numbers. Does Adobe Campaign receive/ store any tagging or information from the operator/ vendor when a mobile number with DND/ NDNC activated is sent an SMS from Adobe Campaign? If yes, then where can it be found? Regards,Jayesh

Does anyone know if there is a way to configure a proxy server for all requests made by the Campaign client (v9032)?

Hi,I've a workflow that will run everyday.And seeds should go out only twice in a week (let us suppose on Monday and Wednesday). I'm trying to achieve this using the criteria as shown below in screenshot and with this condition delivery executes successfully on Monday and Wednesday but for the rest of the days delivery gets failed. Any help would be appreciated. Thanks!   

Hi team,can you please share the steps or process of Integrating Adobe campaign classic instance with Gitlab. thanks 

Hi all,We have a program for cart abandonment running for quite a long time. It's getting the data from AA with an API call, but I'm thinking about changing this as the API call takes too long to run and I suspect there should be easier and more efficient ways to do this.I would like to do it enriching the program with the sku's of the products abandoned, and also using customer attributes of AA (so users don't need to be logged in to identify them) Any idea apart from using Adobe Triggers? Would you recommend to switch to these?Thanks so muchGuillermo 

Hi Team,  I have a SQL function which is returning some value and i need to check what is the value it is returning. Do we have any javascript function in adobe check what the function is returning through a workflow.  i tried like below inside javascript node of workflow but it errored out: nova_offer_validateActiveOfferCountTest(x integer) : this is my postgre function   function getCampaignLabel1(){return sqlGetString(nova_offer_validateActiveOfferCountTest(5560752))}logInfo("Function is returning:"+getCampaignLabel1()) SQL function under Administration>Configuration>SQL scripts>rsn:postgresql-rsn-novaOffer.sql :  CREATE OR REPLACE FUNCTION nova_offer_validateActiveOfferCountTest(P_IOPERATIONID INTEGER)RETURNS VARCHAR AS $func$DECLAREL_overActiveOfferLimit INTEGER := 0;OFFERCOUNT INTEGER :=0;L_errorCode VARCHAR(8) := '1';BEGINSELECT IRSNMAXACTIVENOVAOFFERS INTO L_overActiveOfferLimitFROM NMSOPERATION noWHERE no.IOPERATI

Hi, I'd like to create some predefined filter for specific folders.Is there any possibility to restrict the visibility of that filter ?Visibility Context below doesn't seem to work Thanks  

Hello, I am trying to create an external account so I can use the DM delivery activity.  I want to be able to utilize the logs and not have to create a file extract.  When I created a Routing type and SFTP type, neither show up when I try to select them in the delivery properties tab. Any ideas as to what might be causing this? Thank you, Mark

Hi, We have requirement to make few attibutes in schema, not to visible in configurelist until clicks the display advanced field option.Normally those attributes should not be visible in configurelist (Data schema- Data Tab). If I click the Display Advanced field option It should visible. Please help me here.Thanks in advance.    

Hi there,how can we read / write data from a MariaDB database?

Hello,I have added few recipients using an import workflow (data upload --> enrichment-->deduplication --> update data). The worklow ran fine without any error, but I cannot see the newly added profiles under the recipient folder (profiles & Targets --> Recipient).The newly added profiles can be viewed in the data tab of Data Schemas--> nms:recipient as well as the exteded recipient schema. Also, I can filter the recipient with query activity.  What could be the issue? Thanks & regards,Navin