Adobe Target

Hello, I'm trying to create an activity where the default experience is one of the experience's from a different, currently running activity.  Or maybe there's a better way to achieve what I want. Here's my scenario - I ran an A/B test on my homepage and the test experience won. While the development work is being done to hardcode the new design, I want to run another A/B test with the winner from the 1st test set as default. Currently, when I try to create the 2nd test it uses my old homepage design that is being replaced, but I want to start testing the new design against other variants. I've played with the tools and Googled a fair bit and just couldn't find an answer so any help is much appreciated!

Hello, I was just wondering a way to test the different experience that's setup for A/B testing in Target.I understand that Target have provided an "Activity QA" URL which appends parameters to the site, however depending on how the Target's activity / experiment is setup, the "Activity QA" URL might not be available. For instance, if the activity is set to have one initial audience, but each location is filtered down again based on difference audience criteria, with this config we're unable to get the QA URL parameters. Most of the published/activated experiments are already configured in a way where the "Activity QA" URLs cannot be used. Screenshot attached below of what it currently shows for me. Is there a way to verify and test this experiment without the QA URL parameters? For instance clearing or setting certain cookies? The way that we've been testing these are using private/incognito, but we still have to close the browser and reopen the site again to get different e

Hi, In an activity, i have 5 different experience/offer. I would like to show each experience only for 3 times and move on it to next experience and so on. This should work based on the priority setup in the activity. Any suggestions?

Hi Team. I am involved in a project with Adobe Target Web SDK implementation (https://experienceleague.adobe.com/docs/experience-platform/edge/personalization/adobe-target/target-overview.html?lang=en) and the offers are in JSON OFFER format because the customer wants to get the offers that apply for a 3rdPartyID through API to show the experience in another system. I have followed this sequence:=> Creation of JSON offers=> Creation of Audiences=> Definition of Location (MBOX)=> Creation of XT (Experience Target) activities with audiences, json offer experiences and goals As I could understand to get the activities and offers that apply for a specific thirdPartyID, the API called "Prefetch Mboxes" (https://developers.adobetarget.com/api/delivery-api/#section/Prefetch/Prefetch-Mboxes) should be used.  Observing the parameters, some of them are to define the 3rdPartyID, tntID and one or more mboxes.The issue here is that if you have more than 1 a

Hello.The documentation tells, that if overrideMboxEdgeServer=true, then <clientCode>.tt.omtrdc.net will be used for calls to Target, and if it's false, then mboxedge<clusterNumber>.tt.omtrdc.net. Documentation also states that for CNAME usage overrideMboxEdgeServer should be false Documentation links:https://experienceleague.adobe.com/docs/target/using/implement-target/client-side/at-js-implementation/functions-overview/targetgobalsettings.html?lang=en#overridemboxedgeserverhttps://experienceleague.adobe.com/docs/target/using/implement-target/before-implement/implement-cname-support-in-target.html?lang=en QUESTION: Having all this information I still dont understand the reason of what overrideMboxEdgeServer was made for ?And why for CNAME usage it should have false value ?

Hello Experts, Hope everyone is doing well. When we activate audience segments from Adobe Audience Manager to Adobe Target, and create an Experience Targeting activity personalizing experiences for those audience segments, does Target render the experiences in the first page load (of the visitors) itself? Best,Kishore

Hi,  This may be really easy, but I want to be sure of this question. I have configured an A/B test and I would like to know if, after a user converts, they could see the experiment again. If they can see it again, how can I configure the test in order to not show the experiment after they converts? Thanks a lot 

Hi,We are using AEM with Target using mbox.js version 63. mbox cookie is set by the mbox.js on load of the pages that has the targeteted components. We would like to make change to get consent from user before setting of any cookies on their browser, For which I am looking for some option to disable setting of the mbox cookie on user browser. Can someone help me with right approach to achieve this.Thanks,Amuthesan

Hello, We use Google Analytics to track the traffic and are exploring tools for doing A/B Testing. Can we link Google Analytics and Adobe Target? Scenario : We want to use Google Analytics Segments for Targeting (using Adobe Target). Is this possible? Reference Link : https://www.blastanalytics.com/blog/adobe-target-vs-google-optimize-360-testing-personalization Cheers

Hello,I'm looking to deliver a Target activity to users but only once per day. It is a pop up modal that users can exit out, I have it set that they will only see the experience one time ever on first page visit. I'm wondering if anyone has a profile script that can be used to say "deliver activity once per day"? 

In Client side to implement target, we commonly used to create launch and add launch script on the page right? And there is another way to implement target (i.e., from the server-side- Tool functionality). Can anyone help with the process of how to do that? @andrey_osadchuk @ryanr7 @perrin_ennen @gaurav_singh_02 @yuhuisg @pablo_childe

How this count works? does visitor things is same as adobe analytics here?so once counted will it count again or wait for that visitor to expire? or it counts on visit based? 

how do i test in QA an excluded audience represented by a string of kws inside the url?the problem is that the QA urls are already defined. How can I go ahead to test query exclusion in QA?ex: Site Pages: Landing Page Query doesNotContain xxxxx 

Hi!  I've created a Target Activity using experience cloud segments (specifically from Analytics) and I would like to know how can I limit the number of times a visitor sees the activity. This is the segment I've created. Here's the logic: If a visitor sees that page within their visit, them I'll show a specific message to them whenever they return to my home home. But I would like to show the specific message just a certain number of times (for example 5) then, the message should be off for them or they will have to be no longer in the activity. Which is the best way to do it? Taking into consideration that I'm creating segments in Analytics.   Thanks a lot for your help 🙂

Hi community! Just wanted to ask a question about A4T. When you archive an Adobe Target activity - does it remove all the historical reporting for workspaces created in Adobe Analytics when the experiment was setup using A4T?

Is it possible to view which experience was the winning version when using A4T reporting?My use case is wanting to get a count of all the winning experiences launched in a particular timeframe.

Hi All,I am creating an regional mbox for my implementation.Below is the code that I have written. I am getting an error as shown in the snapshot . Please let me know what is correct way to write the code in selector section(highlighted in bold in the code)  for  "adobe.target.applyOffer" $('.col-lg-4.col-sm-6').eq(1).addClass('mbox-name-homepage-txt'); adobe.target.getOffer({ "mbox": "txt", "params":{ "name_of_page":"Profile Page3", "pro_uname": "Uber CRO3" }, "success": function(offer) { adobe.target.applyOffer({ "mbox": "txt","selector": ".col-lg-4.col-sm-6.eq(0)", offer: offer }) }, "error": function(status, error) { console.log('Error', status, error); } });I have also used "selector": "(.col-lg-4.col-sm-6).eq(0)" and it is not working     

I need help to understand how Target determines what parameters to include in the /mbox/json request when getting offers. The exact issue I have seems to be caused by some legacy from people who don't work at the company anymore and left no documentation, so it's quite puzzling.When I check the request in the browser's debugger, I can see:parameters added out of the box, like screenHeight or mboxTimeparameters added by our custom codea few more that come from elsewhereThe ones from the last part are definitely not out of the box (their names refer to some of our internal processes), but they are not mentioned in our custom code. Where else can they come from?Our at.js version is 1.8.2.

Dear Team Iin process to use Adobe Target Delivery APIs for Mobile Personalization. Below end point i am using it https://<clientCode>.tt.omtrdc.net/rest/v1/delivery?client=<clientCode>&sessionId=d359234570e04f14e1faeeba02d6ab9914e'   Body Part of request {"id": {"tntId": "XX"}, "property" : {"token": "XX"}, "context": {"channel": "mobile"}, "prefetch": {"mboxes" : [ { "name" : "OfferSlot1", "index" : 1 },{ "name" : "OfferSlot2", "index" : 2 },{ "name" : "OfferSlot3", "index" : 3 },{ "name" : "OfferSlot4", "index" : 4 }] } } }' Note: XX  i have used masked values. Dont consider this as actual value i used in API call. I am getting below error{"status": 400,"message": "Errors: field - [context] - MobilePlatform should be provided only for mobile channel;"} I am not sure what should be done in this case?   

Hi, I get some JSON offers before page rendering and apply the changes ( if there is a need ) using a custom function, now I want to keep listening to them and apply again without having to refresh the page, is this possible ? Thanks in advance

Trying to load Target with Adobe Launch, ended up with the "Adobe Target content delivery is disabled"-error on pageload. So I´ve been reading through the forum in search of how to solve the issue withut success , tried to add the cookieDomain to window.targetGlobalSettings  (in the at.js header) but that did not help, the site is running on heroku so its on a subdomain to herokuapp.com, added full hostname like xyz.herokuapp.comIs there any other setting to be added as a global setting that i am missing? thanks in advance

We are handling customer's couple of websites public facing website as well as their customer's portal website which is hosted under subdomain of their public facing. On both websites we have personalization & recommendation use cases. Till one week back using VEC we were able to configuring A/B, XT on both websites. However since that week we are unable to load the customer portal website(password protected pages) in VEC. Application not loading beyond login page. Outside login and overall website behavior is normal and as per expectations. Public facing website is also working as expected in VEC. Also earlier cross login session between portal and Adobe target VEC was also working fine where in we used to login into customer portal first in one tab and in separate tab (same browser) we used to browse portal in VEC and we used to configure respective activities on various pages of portal (login session was getting shared across 2 tabs). This is also stopped working.

We are using Target loaded by Launch and consider using Target's Visual Composer with Experience Fragments exported from AEM. We also have quite a lot of components with custom JS initialization code which will be used in these fragments if we start using them.What is the recommended way of calling this initialization right after an offer with a component is loaded? What event should our code handle to achieve this, if we don't know exactly when the offer will be loaded? Also, what will change in the approach if Launch's script is loaded with "async" or "defer"?Our current Target version is 1.8.7.