Adobe Target

Hi everyone, I am looking to create an "in-venue" personalization.  I'd like to add an audience that creates a bit of a geofence but I am struggling with the way Lat and Long are set up in Target.  (I am also adding ZIP code and WiFi IP addresses) I would need a tool/system where I can pinpoint a location, note a 5 mile radius or something like that and get an output of Lat > xxx degrees, Lat < xxx degrees & Long > -xxx degrees, Long < xxx degrees. Does anyone have any experience with this or ideas to assist?

Hi guys, We are trying to create some test profiles in our sandbox environment, and in order to do that we are executing the following command for calling the Batch Update profile API v2 (according to Adobe Target docs, that should be possible with v2 of the API): curl  --request POST --header 'Authorization: Bearer <ACCESS_TOKEN>' \      --data-binary '@BATCH.txt' \      'http://OUR_CLIENT_ID.tt.omtrdc.net/m2/OUR_CLIENT_ID/v2/profile/batchUpdate' The contents of the BATCH.txt file are like this: batch=thirdPartyId,param1,param2,param31,TestValue11,TestValue12,TestValue132,TestValue21,TestValue22,TestValue233,TestValue31,TestValue32,TestValue33 And we are getting this error: <response>    <success>false</success>    <visitorId></visitorId>    <message>Batch is empty</message></response> We’ve also tr

We are noticing that a lot of our users seem to hit a "network request failed" when bringing the at.js file into a React web application: This is a screenshot of the error we are detecting.  What is the typical cause of this?  Can it be security settings on the browser?  Is there a workaround? 

We have made multiple edits to the same adobe experiment during couple of months . Now we would like to see the previous revision of the experiment. Is it possible to enable that feature ? I know about change log but it does not display what exact changes were made. 

Hi,We have recently implemented Target v2 extension (at.js 2.8.1) via Launch on our website. Activities from target are working fine on website pages, however I am not able to see at.js / Target call on network tab as it used to be earlier. Was there a change because of which the call is not longer seen in network tag ? How can I make sure Target is implemented on pages ?  Thanks!!

Hi, Is Adobe Target supported on an internal facing site(intranet)? If yes, what are the prerequisites and does it work well with on-prem AEM? We currently have on-prem AEM and will be moving to Adobe Managed Services in coming months. Thanks in advance!

I have some recommendations running on a PDP. When I apply an inactive recommendation preview link, all my recommendations disappear. The recommendations I'm trying to preview don't appear either. If I apply a QA audience and set it live (e.g. ?qa=true URL parameter), things work fine. Any idea what's going on with the preview links? 

Hi everyone, We are initiating a testing program to explore how different site executions help us to drive impact. I wanted to see if the community had a recommended template for documenting tests, including goals, approach, timeline, dependencies, methodologies and later, results?Thanks for any advice!

Hi,Checking what can be better approach to implement countdown time so that: - On Day3 it displays message text X- On Day2 it displays message text Y- On Day1 it displays message text Z  All these X ,Y , Z message should not be exposed to end user before time. We are planning to expose Product Promo codes each day which end use should not know before that date.Should we use Target in combination to Experience Fragment so that Target keep changing content based on Day3 , Day2 ..Day1.Or any other good approach anyone tried.thanks in advance. 

Hi Team,   Is there anyway that we can verify how many active profile scripts are running in AT? Thank You In Advance

I was editing some HTML code within Target and would like to reset the page back to its current live version.Is there a way to revert any changes made to an experience back to the original URL?   

Hello,Last week we updated the latest AEM Service Pack to PRD. After this release we got some critical issues with Adobe Target:- Adobe Target is loaded twice when added a Custom code container in the body (With some simple console log). Causing some components not to loadWhen you remove the custom code container from the activity, target is only loaded once (Normal)- When you add a custom code container in the head tag, target is doing fine and is only loaded once (Normal) Adobe Target is loaded via Adobe Launch or "Data Collection"Any ideas to fix the issue for body tag? Please let me know if you need more information. Kind regards,E

Hello,I'm wondering whether Adobe Target activities have any impact on floodlights tags? I'm looking to run an on-site A/B test and I want to make sure we'll be able to still capture floodlight tags and conversions. On a similar note, is there anything that can be passed to the floodlight tracking that will identify which experience a user is seeing?Thanks! 

I have created a rule in launch as in the image below. I get, from html attribute, information to populate parameter values, these attributes are available after 6 sec since window loaded.In target I have created an experience where audiences are based on paremeters value sent with this rule, but the experience is not triggered. what am I doing wrong? which is the difference between prefetch.views[0].parameters and notifications[0].parameters? can I use notifications[0].parameters to create audiences to show specific experiences? is there another way to send parameters to target after tot seconds? thank you

Hi All,I want to implement getoffers/applyoffers on my website (non SPA) but need to understand terminology use in implementationIn getoffers()/applyoffers() I can use any one of the below functionality in implementing the codeRequest > prefetch vs Request > executeI need to understand1) the difference between both the functionality (prefetch vs execute)2) When to use either of them3) How it will impact the delivery4) Can we use it in combination like in getoffers() I use (prefetch) and in applyoffers() I use (execute)  I have read Adobe document but it didn't  clear  my questionsexperienceleague.adobe.com/docs/target/using/implement-target/client-side/at-js-implementation/functions-overview/adobe-target-getoffers-atjs-2.html?lang=en      

Hello all, I have an A/B activity where I'm seeing traffic enter both experiences. What initially brought my attention to this was interaction with the chat widget (~10%) in the control variant -- Live Chat Button Opened. See Venn diagram and data below. This is unexpected because the widget is being suppressed in the control. In fact, there is no code that would deliver the widget here. Is this type of traffic crossover common? Is it possible a visitor entered experience B clicked a button, then later enter experience A, but the initial engagement was captured in the subsequent visit? Thanks in advance for your help! -Brion

Hi Team,   Trying to iimplement Prefetch and Notification features.     Any guidance is approeciated. How can I see weather Notifications reaching back to Target. How can I validate or verify it.  Thank YOu,     

My current recommendation activity has a "No recs" (Control) and a variation with the recs. When I try to preview it, nothing shows up. My experience.id shows "4" in an activity that should have only 0 and 1Any idea why?   

We are trying to setup a cross channel test with our email channel. Experience A: A page element existsSegment: Source Code XYZ from email A OR sample of all other traffic Experience B: A page element is removedSegment: Source Code ABC from email B OR sample of all other trafficWe know how to create an audience off of a variable, but struggling only to apply one segment per variation.

I have read that all Adobe Analytics metrics, including calculated metrics, should be available in our connection to Adobe Target.  However, we don't see all metrics, including calculated metrics, in our Adobe Target tool.  We have been told that some of them cannot be included yet due to different APIs that are connected.  We've also been told that we won't be able to see all metrics, including calculated metrics, until more modern API connects are implemented.  Is this accurate?  If so, is there a timeline for when modern API connections will be made available so we can see all metrics, including calculated metrics, in Adobe Target?

Hi Team,   We are experiencing 204 as response for delivery call with beacon as true and notifications.    Any idea what should be the response?   Did any one executed adoe.target.trackevent on latest at.js which will execute delivery call with adding notifications to it. Please help me to resolve or some guidance.Thank You  

Helloooo,  Is it possible to create an A/B test in an A/B test see screenshot hereunder.  Thanks in advance. Kr,E

Hi Team,We have made the necessary changes on the adobe launch side to collect the several entity (name, category, brand ..etc) value along with entity id to adobe target through parameters directly on the page. However, I could see some of the product entity values are not appearing as expected. it is just showing the Id value and other entity values are empty but the entity parameters are receiving as expected on the target call as per my debugging. Am I missing something and anything needs to be updated? can anyone assist me on this issue? Note: The entity values which I have passed via data feed is showing as expected. Thank you,Jay.

adobe.target.trackEvent({ "mbox": "clicked-cta", "params": { "param1": "value1" } }); Hi Team , "Param1" from above snippett is that something possible to use dynalic name in trackevent? If yes please guide me. Thank You 

We have installed the code for target on the website - https://www.murdochuniversitydubai.com/ However it is not working and showing above warning. Can anyone help debug the issue please?    However it is not working