Adobe Target

Currently we have an Adobe Target Experiment active on our site for an A/B experience. It seems to fail to load the experience on the initial load of the website (we have cleared all cookies/cache/history). However, when we refresh the page, Adobe Target successfully loads the experiment in either A or B experience.  Any suggestions as to what could be causing this to happen? Why does Adobe Target experience only begin to load after a refresh?   

Hello, I'm new to Adobe Target, so this may be a basic question.If I have multiple activities set up to deliver content on the same page to the same audience, can I control when a user sees one activity as opposed to another?For example, say I have activity 1 and activity 2 with overlapping audiences that deliver content to the same page. Can I set a rule that says that if a user has never visited the page before he will see activity 1? After the visitor sees activity 1 three times, then he will see activity 2 going forward?Assuming this is possible, does this go against best practices? Should collisions be avoided as a general rule?Thanks,Keith

We’re running into an issue with the recommenders with our SPA (Singe Page Application) implementation using ReactJS.  The problem is that recommenders only show in the SPA when the page is refreshed.  This seems to be related to how the different calls are being made into target. For the initial load of a page, the page load request is sent but for all subsequent pages, just the triggerView call is sent.   This is because for a SPA the page doesn’t reload, it just changes the content in the views.  In my testing it seems that ONLY the page load request seems to load the recommenders, not the triggerView.  I did some debugging of the launch code and it seems to have confirmed it.  When trigger view is called, it just tries to load and view changes out of the local cache and then tries to render it.  For something like an A/B test there are changes present and are rendered accordingly.  For recommenders however, there isn’t an entry stor

Hello community, I do have a few questions related to the target activities in AA.I created a dozen of activities in target, tested with them, waited for a few days already. 1. some activities still don't show up in the dropdown list. Does report suite configuration matter?2. some deleted activities are still shown up in the dropdown list. I would like to get rid of them...3. is there anyway that I can "hide/ignore" the activities from a specific target workspace.

Hi all, I'm inspired by the use case mentioned that "Products with incomplete metadata fields (missing thumbnail, price, or other important metadata)."(source from https://experienceleague.adobe.com/docs/target/using/recommendations/entities/exclusions.html?lang=en). It's a good idea to manage feed quality, especially for the null value.  Unfortunately, I failed to implement this concept in AT. I listed what I've tried to configure below.1. From the "Exclusion" interface, I put "null" text after the equal operator. Unfortunately, it doesn't work. 2. From "Catalog Search" > "Advanced Search," I'd found two special operators such as "value is present" and "value is not present." It seems it could solve this issue. Unfortunately, again, the drop-down selection from "Save As" doesn't allow it to be used. Does anyone have practice managing a feed file with null values except by pointing to the source file? As you know, by leveraging Launch, it can pass

Hi team, While setting up Adobe recommendations, we tried to import Google Product Feed. However, we ran into an error saying 'File parsing failed' (like below) with no further details.  Can you provide more information on what this error is related to? Any suggestions on how to troubleshoot? Thanks! Regards,Jingjing

There's new documentation about how to implement Target with the Edge Network API, However, it doesn't mention how I can pass all the options/params I usually send to the Target Delivery API, for example, let's say I need to send an "at_property" token to be able to retrieve activities from a specific Target workspace. How can I achieve this in the Edge Network API? is there any docs explaining how to migrate from the Delivery API to the Edge Network API?

We are experiencing Adobe Target status code 403 error across all our websites.This is what we see in the Target call: This is what we see in console: Can anyone help urgently?

Hi,Are we able to target users based on the page they land on using adobe target?Thanks

I have an Adobe Target at.js v2.x question, we are in the process of migrating from 1.x to 2.x and hoping to leverage preloading and triggerView for a VEC friendly implementation that scales.The question I have is around the naming convention of the triggerViews - let me give an example:Say we are an eCommerce website that has many different product detail pages (PDPs), we have 2 options when defining view names for each PDP..We keep it generic - i.e. single view name for all PDP `shop:product-detail`We make it granular - i.e. single view name per product `shop:product-detail:product-123` Each has a pro and con, if we want to run a test across all PDP pages then #1 is most effective, otherwise if we wanted to test on a sub-set of PDP then #2 might be more effective.Would be interested on how others have approached this? Does the triggerView also allow a templated approach where I can apply modifications to many triggerViews that match a certain pattern - e.g. starts with `sho

Has anyone had any success in deploying an at.js 2.x.x file via Google Tag Manager?

Hello all! According to the documentation located here: https://adobetarget-sdks.gitbook.io/docs/core-principles/bucketing I should be able to bucket users into an A/B test experience by passing an arbitrary thirdPartyId parameter with the outbound mbox request.  However, I'm seeing that this is not the case when passing this parameter in (at least not immediately).  Is there a latency period for this thirdPartyId being mapped to an experience in the Adobe CDN?   Follow up question, if in future calls I were to also pass in marketingCloudVisitorId and tntId params along with thirdPartyId would the Adobe CDN then key all of these IDs together and bucket the user appropriately? Thanks!

I'm reading target docs about server side integrating with 3rd party data sources and there are some limitations and there is mention that i should integrate though adobe.io to pass them but then on adobe.io docs I see same description about profile update with same limitations and link to "Server-Side Delivery API" which is top of same documentation. Where I can find real documentation where single updates will be processed faster than 1-24h? 

Hi everyone, I have created an audience on Google Analytics. Please let me know if & how I can pass the audience from GA to Adobe Target. Thanks & Regards,Abhishek Kukreja

The primary goal metric (lightbox clickthrough) advanced setting is "Increment count, release user & bar from reentry" and "Default/other activity content". The additional goal metric (form submit) advanced setting is "Increment count & keep user in activity". After the primary goal is completed (lightbox clickthrough), will the additional goal metric continue to be tracked during the same visit if the visitor subsequently submit a form?

hi target experts, We are new to Adobe Target and trying to check if the below use-case is possible with Adobe Target. Users gets into the landing page, Default banner will be shown.Then user navigated to Product Description page and clicked on color variants of the products and exits website.Next time when the user gets into landing page, we need to show the product image as a banner in the landing page.Note: Website runs on AEM and we have integrated AEM with Adobe Target to export Experience Fragments.

Hi Everyone, I want to create an audience on Adobe target for users who have completed a particular CTA on my website in the past 60 days.Please let me know what attributes/event can be used for this. When a user clicks on the CTA, a dialogue box is popped up while the URL in the background remains the same. Also, is it possible to change the duration for which a user will be part of this audience list? Thanks & Regards,Abhishek Kukreja

Does the current version of the Node SDK only make mbox calls asynchronously?  

 error: failed to load data  while opening pages  

Is it an acceptable pattern to use the mbox cookie session value as sessionID parameter for the Target REST API calls? https://developers.adobetarget.com/api/delivery-api/  

Hi!I am very new to Adobe Target and I'm about to launch some display advertising for a brand new landing page BUT the landing page is not published within AEM yet. Is it possible to set up Adobe Target - multivariate testing without that published URL?Thank you!

Hello community,We have implemented Adobe Target to our iOS application and run A/B test.Communication with Target server is started just after the second launch of the app. I need to launch the app, kill it and launch again. Where I can set up something to resolve this issue?

Hi, Is there any way to see Adobe Target users last log-in or access date?

Hi Team, While loading the Target VEC experiences with Web SDK - we are noticing that in a specific experience, one of the action is not rendering onto the page, whereas all other actions are rendering fine. Also, this is rendering fine in edit mode but not working on live or preview mode. The change is a simple text replace. Did any of you notice any of such issues or any troubleshooting steps would be a great help. Thanks in advance..!

I want to build an activity wherein if the user do not click on the default CTA for 60 days he will be shown different CTA on LP. Note that for the initial 60 days he will be shown the default CTA on the LP.  Please let me know how to setup an activity and audience for the same. Thankyou,A.K.