Adobe Target

Activities page user interface refresh (October 25, 2023) As part of the Adobe Target team’s ongoing effort to improve the user-experience for Target users, this release refreshes the Activities page in the Target UI. This update unifies and standardizes design patterns that were previously inconsistent, while adding new enhancements. Starting Wednesday, October 25, a percentage of customers will have access to the new UI with additional customers getting access in the next several days. For more information see Activities.   For more Adobe Target release notes, check out Target Release Notes (current) 

Hi,I am using mbox3rdPartyId whose value is equal to the user login id (1st party id) when a user is logged in and equal to null for a unauthenticated user. I cannot change this setting for now so trying to figure a workaround for this. Basically, when a user first visits the site, I need the experience served to the user before and after login to remain the same.Current Situation: Unknown / unauthorised users - Exp ALogs in using 1 account - Exp BLogs out and continues to browse - Exp BLogs in using second account - Exp CLogs out and continues to browse - Exp CLogs back into first account - Exp B Desired Situation:Unknown / unauthorised users - Exp ALogs in using 1 account - Exp ALogs out and continues to browse - Exp ALogs in using second account - Exp CLogs out and continues to browse - Exp CLogs back into first account - Exp AHow can I write a profile script that serves the same experience to a user in the same session, if the visitor has the same ECID & session

We have an XT activity live on websiteabc - which is appearing for a specific visitor in incognito, but not in their regular (non-incognito) browsing state.On a hunch, I suspected that It wasn't showing it because it was affected by something that had been stored/cached... and so I did two things to try and resolve it:Delete all cookie data for the websiteabc domainDelete all cookie data on websiteabc.demdex.netAfter I had done this and refreshed the page in question, the activity appeared. This leads me to think that this is something that might affect a much larger cohort of all website visitors - which is not ideal. I don't believe that our caching system (cloudflare) would affect this. Has anyone experienced this before and do you have any suggestions for mitigating it?

Hi, I am new to building up recommendation activities in Target. I have gone through all the documentation given in Experience League and followed it well. However, one problem I am facing is with the feeds which is an important step to run recommendations. I think the best possible way for us is CSV format to feed product data to Target. However, I am unable to understand the fields in the CSV file format that I downloaded from Target. Here is the sample I am pasting for reference.## RECSRecommendations Upload File          ## RECS''## RECS'' indicates a Recommendations pre-process header. Please do not remove these lines.          ## RECS          ## RECSUse this file to upload product display information to Recommendations. Each product has its own row. Each line must contain 19 values and if not all are filled a space should be left.&

i have two dropdown if  dropdown value2 =width & value1=height then  in second dropdown the alert message will showing and dialog wont close, as per below codenow if i change in first dropdown value not equal height but still alert message is showing  but dialog is able to closeNow how i can remove that alert message (function($, Coral) {"use strict"; var registry = $(window).adaptTo("foundation-registry"); registry.register("foundation.validation.validator", {selector: "[data-validation=field-validation]",validate: function(element) {let el = $(element);let pattern=/[0-9a-z]/;let value1=el.val();var value2 = $("coral-select[name='./fields']");if (($(value2).val() === 'width')){ if(value1 === "height"){return "Chosen copy block width" ;}}}});})(jQuery, Coral);

We are migrating a client to the Web SDK.  Their front end used to make a bunch of target.getOffer() calls using named mboxes to get back JSON data telling it which experience to render.  To migrate to alloy, we duplicated this with (roughly) this code: alloy("sendEvent", {  renderDecisions: false,  decisionScopes: [    "mbox_name_goes_here"  ].flat(),  data: _satellite.getVar("Target Profile Params") || {}}) It works like a champ from a test delivery standpoint.  However, when I look at the edge trace, I see that in addition to the scope that we include in the array, __view__ is added as well.  The target_trace items show the global mbox being called.  There are several of these calls made on one page (working to get that changed, but that is another tale), so it seems a lot of extra work.. We eventually WANT the global mbox tests evaluated when we track the page view. Something worse that I think might be related t

When testing a page wih the Activity QA link in Target, we're seeing the experience fire twice.  We are using AEP and there is only a single window-load based rule that allows a decision to occur, so in theory there's only one page load so the experience should only really trigger once.  Does anyone know what may be happening for it to fire twice?  I've just got a console.log output being sent at the moment Cheers

A data push is being made for a loading event, as soon as it is done the banner is displayed.When viewed in the app, the banner does not appear at first, only after performing another action in the app and returning to home.I checked and the event is being triggered correctly, but the banner only appears after some action in the app.Can you help me with this? please

Hello Community, I'm having trouble getting started with Recommendations to show on our site. I have a content feed and when using the debugger I keep seeing a NO_CONTENT code in the response. Does anyone know what are some next steps to display the items from my CSV feed?  

We have a test running to hide some elements on a search results pageThe experiment is set to load on all pages that contain 'search-results' in the urlExperience loads on 1st page of search results ok but is not loading on  the 2nd search result pageIf I refresh the page it will load on 2nd page ok Code for experiment:<script type="text/javascript">var callOnceElLoaded = function(d, f) {var alt_cnt = 0;var elLoaded = setInterval(function () {var alt = 100;var el = document.querySelectorAll(d);if (el.length > 0 || alt_cnt >= alt) {clearInterval(elLoaded);if (el) {f(el);}} else {alt_cnt++;}}, 200);}callOnceElLoaded(".cabinicon", function(els) {els.forEach(element => {element.style.display = "none";});});callOnceElLoaded(".seatnote", function(els) {els.forEach(element => {element.style.display = "none";});});callOnceElLoaded(".refundableBadge", function(els) {els.forEach(element => {element.style.display = "none";});});</script> I am not a develo

In the current People core services setup for a client, we already have an existing customer attributes schema which is uploading 65 customer attributes along with the data within that. Subscriptions are also added for Target and Analytics, where we are sending all of these 65 customer attributes to Target as well.As part of a use case, we need to add 5 new customer attributes to the schema. Here are few questions we have:Is it possible to edit the existing schema to add 5 new customer attributes, so that the existing schema has a total of 70 customer attributes?  As per the documentation in experienceleague, it is possible to edit the existing schema, but I do not see any option to do it in the UIWhat is the best approach to address this scenario?Is there any way to download an existing customer attribute schema (which has 65 attributes)?Is there any way to export/download the list of customer attributes being used in Adobe Target ? We can see the list under the “Configure Subscr

Hi Currently I have the setCustomerId used to pass Customer ID (user login id) to Adobe Target, because of which Target experiences are different for a first time user & a logged in user. Similar to the example given here - https://experienceleague.adobe.com/docs/target/using/audiences/visitor-profiles/3rd-party-id.html?lang=en I'm looking to update this implementation so that mbox3rdPartyId is equivalent to the ECID or some other method where ECID is prioritised over the Declared ID(i.e. login id), which would lead to more consistent experiences for users within the same session. What are the different methods of doing that?I know it's not recommended to change a mbox3rdPartyId setup so what would be some implications of this? Looking to understand so I have a full picture before making the change Thanks

We're running an A/B test, as the analyst monitoring the test, I'm seeing some users (one or two) appear to have been included in the Control Group but participated in an event activity that should only be visible in the Challenger group.  In this case, they clicked on a custom main nav link that was added only to the Challenger group. The test should be set up to exclude users in one test group from seeing the other.  What might be causing this to happen?  I did not set up the test but am an analyst.  Again, it's only 1 or 2, but if the users were in the Challenger group, why are they falling under the Control counts? To add context there is personalization XT being applied to a subset of pages that could fall into the A/B test. But the challenger and control will see it equally. Could this be interfering with the A/B test? Thanks, Michelle 

I want to understand how Adobe Target reads the digital data layer. From one of my experiences, I was trying to pass page title from a data layer While I used reading via javascript variable it did not work for me: However, reading it as a core attribute worked Why this is the case? Also, I have pages with multi-product categories and they get passed into my data layer in the form of an array, and through JS code I am already successfully reading it via data element into eVars for my analysis. However, when I am trying to map this multi-product categories data element to user.categoryId to pass it as a Target mbox parameter for every page load nothing comes up in my favorite categories. Any suggestions as to why? This is why I am wondering how to read values out of the digital data layer into data elements for Target?   

Hi  Is there a way I can access Date Object using Velocity js in Adobe Target. Either in Designs or Profile Scripts. My requirement is to validate a day against the current timeZone in Target  

Hello!  For some tests, we want to ensure that visitors see a consistent experience across different devices.  We know how to do that for authenticated users.  Has anyone found a successful method for doing this for unauthenticated visitors?Thanks!

I want to trigger / start an Activity when visitor generates an add_to_cart event. The event is fire as I can see in the Adobe Experience Platform Debugger. In the POST body I see the following JSON:{ "events": [ { "xdm": { "web": { "webInteraction": { "linkClicks": { "value": 1 }, "name": "addToCart" } }, } } ] } I tried making an audience where that parameter is equal to addToCart but this doesn't seem to work.How do I activate the Activity when this event is fired?

Hey Folks,  With the A4T setup, is it possible to create profile scripts based on adobe analytics evars/props value? Thanks

Hi Community, I have to create experience targeting where I have banners changed for 3 different experiences based on the audience. I wanted to know the scope of changes we can make in the target experience. For example, if changed banners don't have any CTA button like "Learn More" or "Explore" & I want to add them on banners then can we do that through edits in Experiences? Is it a good practice or we should have the component made at the backend which has a CTA button and rename them in different experiences? How far we can make changes to the HTML page?

Let's say there's a marketing professional who doesnt know any or little javascript. How can that individual use adobe target and create complex use cases? Is there any way to do that? or is it possible to do so without any javascript?

Hi Community,  We were recently run a A/B Testing for 2 weeks and it is announced the winner. We tried to explore the reports, we have used the segmentation ( Desktop Device and Mobile Devices) for audience for reporting . Seems most of the users comes from Mobile device. But when we check the data, it is mismatching between overall data.  for Eg: Scenario 1: Overall traffic: 100 visitors Mobile Device: 80 visitors Desktop Device: 40 visitors  Overall traffic should be 120 visitors?  for Eg: Scenario 2: Overall traffic: 80 visitors Mobile Device: 100 visitors Desktop Device: 20 visitors  Overall traffic should be 120 visitors?  Below is the segmentation of audience we have been used. Also attached the audience screenshots.  Mobile Device: Mobile Include: (Attached) Is Mobile Device -> True Desktop Device:  Mobile Include: (Attached) Is Mobile Device -> False  Can you please help me to understand the right method track the mobile and de

Hi, I have activity with criteria most viewed across site with a look back window of 6 hours. I can see the data after I download however I do not see the response in postman. Please help how to debug further  RegardsDivya Shankar 

Target Standard/Premium 23.9.4 (October 4-6, 2023) This release contains the following enhancements and fixes: Feature Details Recommendations implementation pattern The Recommendations implementation pattern using at.js articles help you understand and create your Adobe Target Recommendations implementation when using the at.js JavaScript library. For more information, see Recommendations implementation pattern using at.js overview in the Adobe Target Developer Guide. Added Visual Experience Composer (VEC) enhancements for dynamic frameworks. (TGT-44064) Fixed an issue that caused the selected date in the getViewInAnalyticsId request to not update properly. This fix helps recompute the Analytics link in reporting when the date range and metrics report settings are changed. (TGT-46246) For more Adobe Target release notes, check out Target Release Notes (current) 

Target Standard/Premium 23.9.3 (September 18, 2023) This release contains the following enhancements and fixes: Enhanced the Visual Experience Composer (VEC) to support Lightning Web Components (Light DOM). (TGT-45422) Fixed an issue that caused VEC actions to be applied in the incorrect order. In some cases, the VEC applied some modifications asynchronously and adding extra modifications to an element caused errors if that element displays after an Insert action. Also fixes the VEC URL that now updates when clicking anchor links. (TGT-45983) Fixed an issue with the VEC Overlay feature, which now supports elements in Shadow DOMs. (TGT-45202 & TGT-45262) Fixed an issue when opening a Single Page Application (SPA) page in the VEC and then going to Browse mode caused the Back and Forward arrows to not function correctly. (TGT-45956) Fixed an issue that prevented some web pages from loading in the VEC. (TGT-45983)   For more Adobe Target release notes, check out Target Rele

Has anyone done Hotjar integration with Adobe Target to analyze split-testing variations and personalization with Experience Issues.    Have explorer the link I found Hotjar Integrations Guide: 20 Ways to Easily Install Hotjar | Hotjar Blog but nothing is for Adobe Target.    If anyone made this integration possible, could you please help.    Thanks,