Welcome to the Adobe Target Community! Connect with peers to ask questions, share best practices, explore release updates, and contribute ideas that shape the future of Adobe Target.
Recently active
I am optimizing the Website with a lot of Scripts.Adobe always talks about Profile Scripts and how powerful they are.But is there also a library with the Best Case Profile Scripts which can be used on the Web.For Example Profile Script for Category Affinity, and Product Affinity?I think it would be great to have such a collection.Best Regards Manuel
I am trying to integrate AC classic 7 with AT standard.Integration steps: Integrating Target with Adobe Campaign In the section, Include a Target Offer in an Adobe Campaign Email following steps are mentioned:Create an email in Adobe Campaign.In the email properties, click Include > Dynamic image served by Adobe Target.Select the default image from the shared assets.Specify the location (rawbox).Add any other decisioning parameters, such as the gender of the recipient.Preview the email, selecting at least one recipient for each offer (in this case, a male and a female)Out of this above 6 steps I have performed above 3 steps but I am not able to specify the rawbox and add the decision parameters.Please advice how to configure the same:How to create a "rawbox". At this stage when I try to create an Audience with a custom rule, I can only view "target-global-mbox".How can i create similar Audience that is being used for testing in below video? &
Hi I am new to adobe target, I have read some parts of the documentation, however you can only modify content and add new pop up box on top of the existing layer/your webpage.questionI would like to know if I can add new container to the existing webpage without needing to code/to touch the existing webpage that I have?
Target should allow creating an activity in VEC for the mobile web pages which are accessible only in native browsers.Currently, for non-responsive websites, we have to access Target within respective device browser. This makes overall Target UI bit small and difficult to access all of its pages
The mobile viewport preview feature is designed majorly for responsive websites. However, these also work for the mobile pages which are accessible only in native mobile browsers.Ensure that you have defined the correct Operating system while creating a mobile viewport. This works as a user agent of the native mobile browsersSteps to create a mobile viewport :1. Login to Target and navigate to Setup2. Add new mobile viewport from bottom right corner3. Define Name, Width, Height and Operating System.You can further use these mobile viewports to create an activity for mobile pages.Let us know if this is helpful and feel free to reply for any additional queries in this regard.
I recently found out that Adobe Target only stores 2 years worth of reporting data in the tool. I work in an exceptionally seasonal business and two years of data is not a lot. Please make this a configurable time frame and allow up to 4 or 5 years of data to be available within the tool even if it's in an archive that may take longer to access.
We have hundreds of activities in Target and we need some categorization to organize them better. Labels would be really fine!
Is there any way to override page title in Adobe Target ?
I would like to have the more information about how Adode target know genders and ages from the new visitor(first time).
If you set up an audience based on a zip code, it is not currently possibly to test this without physically being in an eligible zip code.Could the mboxOverride.browserIp url parameter e.g. ?mboxOverride.browserIp=60.234.0.39 be extended to work with zip codes as well.
Once we have found a winning A/B test, we serve it to 100% of visitors whilst the functionality is built into our platform. Tests that are created in the Form-based editor however do not appear together (only one form-based test can appear on any one page). This forces us to create all of our tests in the VEC, which does allow multiple tests to appear on a single page. Unfortunately the VEC takes a long time to load and often crashes when a lot of custom code it used.Could multiple campaigns created in the form-based experience creator appear side by side (on the same page).
Hi All,We have integrated AEM with Search and Promote and supporting different countries. Issue is in Japanese website, autocomplete for a character set like シロアリ対策サ is giving result like シロアリ対策サービス but when this is searched we get 0 results.Similar happening for korea website. Rest websites are working fine.Any pointers in this area will help.
Is there any way to move an activity from one workspace (default workspace) to another (custom) workspace?
Hello - I'm wanting to start doing some headline/title testing across our site. I have some concerns about how this will affect SEO. Google (or any other search engine) will still pull the Control version of the headline, right? But the visitor could click and then see a completely different title, right? Is there any way around this? Do yo usually take organic search traffic out of tests like this when reporting results? Thanks!
Anyone else noticed the latest Firefox tracking blocker feature preventing Target from loading? Our testers are finding they have to constantly disable the tracking blocker to see our tests which has me concerned, with now Safari launching their own tracker blocking features in the latest versionThis article suggests Firefox is blocking the Adobe tracking hostname (omtrdc.net or 2o7.net) Firefox tracking protection blocks all the major tracking vendors Would be good to know if anyone else is facing this issue and possible 'workarounds'
How to setup Target to run redirect test without delay in response time and I need to create redirect activity for 35 different pages. I created the test but it didn't support for all the pages. Scripts only supports for one page. Can you guide me how to create all the redirect pages in single test to work.
We are looking to use Target to test the effect of removing a feature (X). We wanted to ensure this won’t have a negative impact in the conversion rate before we permanently remove this feature X. So the requirements are: For first time user, split into one of 2 groups. Group A is default experience. Group B is new experience minus feature X.User is identified by account number. For repeat user with same account #, always put them in the group assigned in step 1. We have tried to use thirdPartyId = account number and getOffer function to achieve this:adobe.target.getOffer({ "mbox": "target-global-mbox", "params": { "mbox3rdPartyId": '111234978', "activity.id":"253444" }, "success": function(offer) { console.log(offer) }, "error": function(status, error) { console.log('Error', status, error); }}); The issue we are facing is, regardless of what mbox3rdPartyId we pass, we consistently get only the same variant of the offer. It looks like we ar
I want to create an A/B test to redirect page URLs in Adobe Target, that use analytics as reporting source.Currently my website uses the following versions of libraries.visitorAPI.js - 1.10.0appMeasurement.js - 1.7.0at.js - 0.9.3I would like to know how easy is the upgrade and the steps and/or consequences involved.Any help is greatly appreciated.
In an activity, regarding the setting on goal metrics, there is a option to set "viewed an mbox" then show an unseen experience.Is it possible to set "viewed an mbox" N time then show an unseen experience?Regards,Ricky
Background:It's so convenient using the Recommendations Delete API documented here: Deleting an Item From the System Unfortunately neither the UI or the API have the power to delete products with special characters in their ids. Because of this we had to wipe out our whole catalog and wait for mbox product data to make it back in.Feature:It would have saved us time and headache if we could have just specified the products we wanted to delete in the delete API and the system woudl have known how to escape the special characters.
Hello,We would like to use Product Recs on our Product Description Pages which have the product SKUs in the URL. They look something like this:/product.24-MB05.html/product.26-M987.html/product.MG-B234.htmlWe have over a 1,000 different SKUs (URLs) but the structure is all the same. I’ve created a profile script which uses regex to determine whether the current page is a product page however the VEC requires a specific URL in order to use the editor. Using the FORM based approach allows me to use the profile script (or anything else passed to the global mbox) but seems to require an old-school Target Classic in-page mbox (Adobe Launch doesn’t currently support passing parameters to in-page mboxes).Is there a way to use Recs with a dynamic URL (1000+ variations) and he global mbox?
Hi Guys,What are the drawbacks or disadvantages of using Auto-allocate?I feel that pushing more traffic to a single experience only after 1000 visitors and 50 conversion is very small for some high traffic websites. I am also not sure how the algorithm works to decide a better performing experience so early into the experience with so little data. Please share if you have the same concerns or correct me if I am wrong.Regards,Suchindra
Hi,I am following this doc to set up target.Create an Experience Targeting activity The visual experience composer works for me local page. However, when I try to browse any server website, there are errors like: Refused to display 'the url' in a frame because it set 'X-Frame-Options' to 'sameorigin'. I followed the instruction on Adding X-FRAME-OPTIONS to response on AEM 6.2 but obviously this ticket is not even solved. I still have the X-Frame-Option inside my response header.Appreciate for any help.
Provide the ability to optionally specify a different CSS selector for flicker handling in the VEC code view for a particular action. This is useful for scenarios where a page may change structure as its loading and you want to hide an area that is a bit larger than the specific element you want to actually modify.
Has anyone that uses Demandbase data to create personalized experiences via Target identified ways to optimize the set up/integration to reduce the flicker that the user can experience - on FIRST visit - while the criteria information is executed by the system?Example:User arrives to site1) Geo location determined not to be EMEA - no Cookie Consent trigger2) Determined to be user from target client (ABM)3) Execute Target Recs activity developed for target client1-2-3 = too slow process to not create an experience without flicker for the userThanks,e
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
