Adobe Target

I'm reviewing the results of a recent A/B test. I've selected by date range, changed the reporting methodology to visits, and exported the resulting data to CSV. Unfortunately, I can't seem to find a method to download the data by date. Is this not possible with Adobe Target? Note that I do not use Adobe Analytics. This seems like a fairly basic functionality that I'm likely just missing. I've searched this forum and the documentation and I can't find anything about exporting the data by date. 

I have implemented target recommendations to show products and it works just fine.I now want to implement another recommendation not showing products, but other elements (e.g. Categories or Blog posts). How am I able to do that? I guess there must be another feed including all these elements?Thanks in advance

Hi All, We are seeing issues where we see that there are lot of unspecified (almost 58%) for the Adobe Target activity we created.Few points:1. All the pages on site has the Target activity enabled.2. There is a default experience so that when user doesnt qualify for any audience they should fall back to default experience. What could be the reason why we have such a high number as unspecified? Thanks,Nitin

I am trying to get the users mboxSessionID to pass to a cross domain. recently upgraded to at.js and mboxFactoryDefault.getSessionId() is no longer available.Is there equivalent in at.js

Hi Team, As a part of recommendations, we want to show the recommended items to a loggedIn user on the basis of his purchase history and not on the basis of purchase history of all users.For example, If a user John has redeemed few offers on the website then I would like to show John similar offers on the website. The recommended offers must be 'similar' to the offers John has  redeemed in past. The Recommended offers must not include the redeemed history of other users. How do we maintain the user profile in the recommendations ? Thank you in advance for your suggestions. Regards,Ambika

Hi, I'm trying to set up an audience rule to display an UI element until users interact with it, then hide it. Is there a way to do that in absence of a DMP?

Hi there. I found a couple of similar questions from 2-3 years back. But I think my question is a little different. We are looking to accommodate Target Activities of different initiatives and structure within the same page. For example, 1) banner section is changed based on previous page content of user2) primary content section below is swapped according to target audiences (audience A gets personalised content for A, audience B sees different content for that same section in the page) 3) A/B test may be running on content UI elsewhere for optimisation The 3 tests would have different time frame, owner of activity, and use separate Target Activities. What is the best practice for managing this sort of business practice? Use separate mbox'es for different initiatives and run on the same page? Or they would work just fine so long as they do not try to modify the same HTML block on the page? Thank you so much for your help!

I understand that category affinity is contingent on having a value set to the parameter 'user.categoryId'. I was wondering if it were possible to reference user.categoryId by itself as an mbox parameter in my audience rules, as opposed to using the standalone category affinity algorithm? Suppose user.categoryId is associated with the category of my product, can I build an audience whose categoryId matches a specific value?   

Adobe Target Java SDK is now the second server-side SDK that you can leverage when integrating with Target server-side!Java is one of the most popular server-side languages that is used today to power applications - this is SUPER EXCITING and we hope you'll find it tremendously valuable right off the bat Here are some related resources that you'll find to be immensely useful:  Server-Side Optimization with the New Adobe Target Java SDKCheck out this Adobe Tech Medium blog written by the sole developer who created the Java SDK. This article provides recommendations and best practices on integrating with the Java SDK in a highly-performant fashion and walks through sample code to showcase some of the cool performance enhancements we provide developers out of the box!Java SDK is Open SourcedCustomers's developers can now contribute to the Java SDK as it is open sourced! We recognize the fact that sometimes we can't move as fast as our customers want us to and address feature requests for

Hi Team,i am trying to load personalized experience when user login successfully on landing on the home page having URL ending with as home-page.html?success_911122 Not sure where it get stuck .. but target logs working in the network tab also cross-checked using tt.omdtc  Please help me what is a condition i needs to add in the audience  awaiting for quick help as we have to show demo 

Hi,How can I set up an audience to don't launch a test when a url contains some queryparams?www.example.com --> Test will run www.example.com?queryparam1=a&queryparam2=b --> Should be excluded

I have a JS-Function window.addButton(text, url) that I want to trigger when the page is loaded. Each variant of ABC-Test loads the function with different input: Variant A: window.addButton('test1', 'testUrl1')Variant B: window.addButton('test2', 'testUrl2')Variant C: window.addButton('test3', 'testUrl3') What is the best way to implement this function in Adobe Target?

Hi, I see in documentation that "collections are updated with each run of an entity", was wondering if collections are updated when we use delivery target api to update entities as well and if collection that activity is using is updated as well? so when we using inclusion rules in an activity, it will filter entities based on the update values and parameters of the inclusion rule?thank you 

All,I have two questions about Target. First, I've built A/B tests on pages and for some reason my changes will not show up in Firefox even when I will change the manual allocation to 100 percent. Has anyone had any issues with Firefox or any settings you'd recommend to get the test changes to show up?Second, will a conversion metric "clicked an element" set up on an external link be able to be tracked? I've set up a test with the metric and I'm not recording any clicks on the element and have tested on several browsers/devices.Thank you for any insight anyone can provide,Jason Darnell

Hi, I have some issues with Catalog and inclusion rules comparisons in adobe target recommendations. I am trying to use " is less than or equal to" to compare same entity attribute values that are numeric and it looks like adobe thinks of the attribute values as strings , so only when using "equals" I get a correct entity match.For example, entity.hoursSinceUpdate = 358 is returned when searching/filtering for hoursSinceUpdate is less than or equal to 72What could be causing this issue? Should I delete entities from the catalog or try updating them instead? Any suggestions are appreciated, thanky you

Hello,  What is currently the best practice when using MVT & A4t in combination from a reporting perspective? Can you see all insights needed in Adobe Analytics now or are there limitations. Asking because we are curious to understand MVT in terms of analytics making sure we can understand all 20+ combinations.  Thanks,Tim

Hi Team,An error message popup after I Save an activity in Adobe Target this morning. I did try couple of times and also in incognito window, but still no luck. I also checked the adobe system status and service is available today.Please advise. Error MessageSync ErrorYour updates did not get published to Adobe's delivery network. If the problem persists, please contact Adobe Client Care.

Hi  After upgrading Adobe Target to version 2.3 we no longer have access to 'browserWidth' which we used to create an audience. So i read that i had to setup a page parameter in Adobe Launch, where i passed 'window.innerWidth' to Target. In the debugger extension i can see that under the "execute" parameter the value is {"pageLoad":{"parameters":{"windowInnerWidth":"window.innerWidth"}}}. In Target i tried to create an audience where i used this parameter, but it does not seem to work. Any pointers would be helpful. 

I want to run a simple (redirect) A/B-Test. I set my primary success metric to "Conversion" and "Clicked an Element" using the VEC to click several elements on the page I want to test.I also chose Adobe Analytics as reporting source.But what will eventually be reported in Adobe Analytics, besides the number of conversions and visitors:- Which specific element was clicked?- Will I be able to segment the number of conversion of each variant with the dimensions in Adobe Anayltics, such as device type?- Can I make detailed analysis for each variant: so can I check different metric for users of each variant, such as Time Spent of user form variant A and  Time Spent of user form variant B?

I'd like to personalize my website where the hero heading of my homepage will dynamically change if the visitor clicks on one of my paid advertisements on Google. For example, suppose my paid ad contains :"New Cars - Compare Specs, Pricing & MPG", similar to this paid advertisement by ford. If the visitor clicks on my paid advertisement, I'd like to build a personalized experience where the title of the paid ad is used as the heading of my hero banner on my homepage. Would this be feasible? If so, how would I go about developing this experience? 

Have a few questions on custom attributes -Max time the data can last – default is 14 days, can be extended to 90. Is it possible to extend to 180 days?When uploading the same file again, should the "time for which the data is active for" refresh? We found that nothing happens if the file is exactly the same. Is this correct? If so, we could potentially could add a dummy date column. Will that work?Thanks

If you missed the final webinar of the ⭐Summit 2020⭐ Adobe Target Topics and Speakers Webinar Series, on Personalization Strategies Using Artificial Intelligence and Adobe Target (8/13/20), presented by Jason Hickey (@jason_hickey), fear not! Check out the recording here: Personalization Strategies Using Artificial Intelligence and Adobe Target (8/13/20) Artificial intelligence is redefining consumer expectations and opening new doors for marketers, developers, and product owners to engage with consumers everywhere. Not sure where to start? Join Jason Hickey, Senior Product Marketing Manager for Adobe Target, to explore the ways Adobe is innovating on personalization use cases, and uncover key tips and tricks to get to value fast with Adobe Target. In this session, you will learn:• The machine-learning personalization and optimization methodologies available in Adobe Target and when to use them• Tips and tricks to get the most out of ea

What is the best rule to build the audience to Target Social media users

Hi, I am trying to use an MVT to test 6 different content/copy types across 6 different locations. When building out the MVT I end up Cartesianing out the number of experiences with a lot of duplication of content that I do not want. Is there a way of building the test without excluding so many experiences that duplicate content across multiple locations? First Experience:Location 1, Content ALocation 2, Content BLocation 3, Content C Second Experience:Location 1, Content CLocation 2, Content BLocation 3, Content A Don't Want Experience:Location 1, Content ALocation 2, Content ALocation 3, Content B