Adobe Experience Platform

Hi,"I encountered the error #/id: [8918e4ba-196d-4f3b-ae4c-1053465f5bb6:7df07op28c3a4pf8:0] is not a valid URI reference. Upon analysis, I suspect the issue might be related to the colons (:) in the value. However, I cannot fully understand this value, as currently, I no longer see this kind of value being generated. Could you provide insights into what might have caused this error and why it occurred only on that specific day?"

Hi All, We are using parquet file format and in mapping set I am trying to insert current timestamp into one of the attributes.Tried below Mapping configuration   "sourceType": "ATTRIBUTE",          "source": "current_timestamp()",          "destination": "_XXXXX.systemTime"      } "sourceType": "ATTRIBUTE",          "source": "{{now()}}",          "destination": "_XXXXX.systemTime"      } Timestamp is not ingested. any help will be appreciated!!

Please correct me if I'm wrong. We are using the ACDL extension, which will automatically initialize the adobeDataLayer. So, the web application developers only have to worry about initializing the data layer, if they are adding some data before the Web SDK code loads. If they are only doing a "push" they obviously need to make the call after the Web SDK code loads. So, would it be a Best Practice to just have them initialize the adobeDataLayer regardless before the Web SDK code loads? Thanks!

Hello gang... We've been running with the WebSDK for a bit now and all has seemed just fine. We've been impressed with the performance as well as the relative ease of implementation. Note that we use the NPM module directly, incorporated into our front-end build process. Throughout testing as well as live data in Analytics nothing has seemed amiss. However in looking at our raw Data Feeds out of Analytics, there are extra "phantom" hits that are being treated as pageviews. There are few if any actual variables set in the Data Feed for those rows, except for some default Adobe ones like page URL, hit time, etc. And when looking at just raw pageviews in Workspace with no reporting dimensions or segments applied, they can be seen. Our pre-implementation testing and evaluation never included just looking at data this way. Unfortunately it looks as though these phantom pageviews correlate almost perfectly with the extra calls we make to just retrieve personalizations from Tar

Hi there, I have configured a schema using Adobe Analytics Experience Event Field Group (Schema 1)I have another schema with a set of Custom Fields (Schema 2)Primary reason for using AA Experience Event Field group is to send data to AA through Launch Web SDK. I do not want all fields on Schema 1 to be passed into AEP. Hence, schema 2 is created with only required fields to be sent to AEP. I have Adobe Launch implementation to send data to edge network on various interactions (page view, page scroll, link click, product view etc.) . However, I want to send data to AEP only on page view event.Using data object (data.__adobe{}) is one of the method of achieving this.But, Is there any other way to achieve this using Data Prep mapping with Schema 1 and Schema 2? If I use data prep to map the fields, say xdm._experience.analytics.customDimensions.eVars.eVar1 (Schema 1)  ---> schema2.pageName (Schema 2), it will map and send data on all interactions rather than ju

Hello Experts, Hope everyone is doing well. Can you help me understanding more around flicker management with AEP Web SDK? With general deployment of Adobe Target Extension on Adobe Launch, we can setup opacity and pre-hiding script. However, I would like to know about functionality with Web SDK. If anyone has already implemented Web SDK, please shed some light around flickers or any challenges you may have seen. Best,Kishore

Hi,I have a situation where I'm capturing the usage of a carousel component. If captures the number of times a user interacts with it. Since I don't want to send out a call every single time, the count is stored and sent on the subsequent page view. I want to report on the page name it happens on, as well as the instances on each page. Each page view captures the previous page name. How can I set this up so someone can see a report on this? I want user to be able to see "Page A" had X number of clicks. Page B" had X number of clicks. The dilemma is since this is not directly associated with the page it happened on; do I need a field in my schema for "pageNamesAssociatedWithCarouselClicks" just so I can have the breakdown by page name? Or am I missing something?  Thanks!

I somehow selected the wrong schema for my data set. Two questions, first is it possible to change the schema associated with the data set, and if so, how (in the UI). Also, we have the adobe analytics source data connector. I was wondering how this will affect that?  Thanks!

Hello!In both Chrome and Edge, this error is appearing on every site when the debugger is enabled:Uncaught Error: Adobe Experience Platform Debugger: Store is not ready after 21 checks On Chrome, this means every site as it appears the chrome version doesn't honor "can read site data" preference at all.  In Edge, this error is mitigated if you select "on click" as the preference - meaning the extension is effectively turned off.  If you turn it on, that error appears as well.  This is on ANY site, even sites that have no Adobe integration otherwise.  I have confirmed this with others in my company as well - a few have remoted them to me as errors (I own the Adobe Tags implementation and am an SA for our overall Adobe stack)

Hi  I have setup meta capi event forwarding and data is going through fine (using platform debugger and assurance). Is there a way to log the response from meta capi event forwarding extension ie how many successful responses vs how many failed , in theory creating an audit log of such of all the responses to the meta capi event forwarding extension   

The search box in the Adobe Experience Platform Debugger when checking Edge Logs (e.g. when debugging Datastreams and Event Forwarding) doesn't really function. It shows how many results there are, but it does nothing to actually filter the results, or allow you to step through the list. This makes finding specific events/requests when debugging Event Forwarding with many rules extremely tedious, as even though I can 'search' and see the count of matches, I can't actually view them without manually scrolling through and looking at the entire list of requests/events/logs/etc...

After the update to version 1.5.0 on October 19, 2023, Adobe Analytics requests sent as POST requests are not showing in the debugger. In the browser network tab I see the requests with status 200.  The Firefox extension is still on version 1.4.1 and doesn't have this issue, so looks like it's related to the update.

Hi Experts, We are using web SDK in our set up and have datastream which has AEP and adobe target services enabled.We were checking for CJA report count with AEP, where we observed that orders and add to cart values are not matching in AEP and CJA. To which it was suggested to enable AJO under AEP service in datastream.Before proceeding, I would like to understand if there are any concerns I should consider before enabling it.And will it solve the problem of getting count of orders from the same journey in AJO. Thank you,Shivani

I have imported a batch file into AEP and I see the data is part of the union schema - Profile.  However when I try to view the data from the View Union Schema vantage point there is nothing there.  And when I try to use the data in an audience definition it says that there is no data.  But when I view the dataset, I can see the data.  What is the issue?  Why can't I see the data in the union schema, and why is Audiences saying that there is no data?  

I am using the upsert_array_replace function in Data Prep mapping. I have correctly selected the source array in the calculated fields and want to replace a specific array in the target. However, the target contains multiple arrays, each identified by an array_id attribute.Is there a way to filter or match the array_id between the source and target arrays to identify the correct target array? how can I determine its position in the target array for replacement? Any guidance or examples would be greatly appreciated!

Hi I have a question about the possibility to update a certain profile attribute under some conditions.Let's say I have a profile attribute called "Last Touchpoint". If the attribute is populated in the profile, I don't want to overwrite it with the value coming from a batch ingestion for a certain source. In other words, I want the value already in the profile to trump any value coming from a certain source, unless the attribute in the profile is empty, but the data source has value. Can this be achieved? Any suggestions?Thanks.

Hi All, In my source file I noticed conflicting values for a specific attribute  for the same identity and ingested data in the customer profile dataset as shown below:Customer IDGenderLastUpdatedID1Female2025-01-13 12:00:00ID1Male2025-01-13 12:00:00 After fragmentation, in profile store I can see the value updated as "Male" (see below screenshot). I've verified using API and it gives me the same result However, when I created an audience it qualified for "Female" only. I have cross checked the merge policy and its selected as default timebased (see below screenshot)  In my sandbox, I used only default timebased merge policy only. Please help me to understand is there anything that I missed something or how segmentation works?

Hi everyone!We are having issues giving users permissions to view and manage XDM-schemas. We have added relevant users to a product profile on the Adobe Experience Platform Service in the Admin Console, and given all the permissions available to the added users in that profile. We have added the users as both users, admins and developers to that profile but nothing seems to do the trick.Does anyone have any idea what we could be missing? Thank you in advance!// Nina  

Hi,I have a number of profiles in the Real Time Customer Profile in Adobe Experience platform. I also have a dataset/schema for Events (XDM Experience Event) and I loaded some event data for the above profiles. If I go under Profiles and check a few of these profiles I can see the events attached to the profile under the Event tab.I think that I can query the profiles using something like this:select * from profile_snapshot_export_<some_unique_Id> and I can parse the available columns in drill down for any kind of information related to the profile and its Attributes. What I want to also do is to query the events linked to the profile so I can verify any audience I build against the actual numbers in the profile.Something like this:select * from profile_snapshot_export_<some_unique_Id> as t1inner join <Events table> as t2where t1.Attribute1= "Value1"and t2. EventType="CampaignDropped"and t2.EventDropDate betwen ... and ... Any directions in building suc

Hi everyone, Wishing all a delighted new year. I am trying to retrieve the audit logs for the schema to capture the change or update in any existing schema, along with the user details. I am using the audit log URL of the Schema Registry API (1.0),(  https://developer.adobe.com/experience-platform-apis/references/schema-registry/#tag/Audit-log)Although I am getting 200, the response body is null. Can someone please help fix this issue? Below is the screenshot of the Workfront Fusion module where I have used this scenario.Regards,Alkash

I want to activate audience from AEP to Campaign V8. What does this error means? 

Hi,We have an embedded hybrid mobile application with ionic framework where we want to integrate the Launch AEP SDK in order to track the app data in analytics. The documentation(https://aep-sdks.gitbook.io/docs/getting-started/get-the-sdk) do not provide any insights in integration for ionic. Can someone please help here?

Hello,Setup: Adobe Analytics using xdm, schema set through code in edit code area JS (btw there are a bunch of warnings in the code ie 'expected identifier and instead saw '=') of AEP WebSDK extension. We are having an issue where a numeric event is not sending values on purchase (number of coupons used in the transaction), talking with experts here seems it should just work. The numeric event is not fired as data layer event but a parameter of purchase and then later turned into an event somehow to be shown in Workspace etc. I should mention that this company is unusually stringent (the most in my career) on access to admin or even testing the purchase path, so I haven't QAd myself, so I can't confirm if the tools are failing or bad setup or CMS related, etc and all I do is try my best with the limited tools and visibility I have. I've read about data object and how it is better so I'm thinking to use it, however would be great to know how to go about using both xdm and

The profile collapse issue happening when more than 150 identities, how to avoid these kind of profile collapse issues, what is the best practices?

I'm trying to figure out how to capture instances of a photo that has been clicked on. That's simple. Where I'm getting lost is the user can also "favorite", "unfavorite", "share" or "more info" the photo. Ideally, I'd like to be able to have one table in CJA workspace present the data in one table, for example: If I can only do it in multiple tables that is fine too. I'm just struggling with how my data layer and XDM schema should capture the data so I can associate the actions to the photos!?!? Any advice greatly appreciated is appreciated.  Thanks!