Adobe Experience Manager

Below error with BUILD FAILED custom Dita-Ot PDF output generation/opt/wem/aem6/AEMCS/author/crx-quickstart/profiles/ditaot--310b84f1-d63a-b932-caa7-28a45f1def74/DITA-OT/plugins/org.dita.base/build_preprocess.xml:62: Failed to run pipeline: [DOTJ078F][FATAL] Input file 'file:/opt/wem/aem6/AEMCS/author/crx-quickstart/profiles/ditamaps/ditamap287154093694521322/cisco-iec6400-firmware-upgrade-guide-artcle-publish.ditamap' could not be loaded. Ensure that grammar files for this document type are referenced and installed properly. Cannot load file: /opt/wem/aem6/AEMCS/author/crx-quickstart/profiles/ditamaps/dtd/apps/cdc/dita/DITA-1.3/dtd/Map/map.dtd (No such file or directory)

Hi All,I am facing issue in authoring the component.  When I search a word in the page in edit mode and click on the component doesn't showing the configure option to author the dialog.  So I couldn't open the dialog to author in AEM 6.1. Template type: Editable templateBrowser : issue happening in Chrome onlyAEM version: AEM 6.4.4Please refer the below screenshot.  Any suggestions would be helpful.Thanks,Velmurugan

Hi Team,In my local AEMascs (2024.7 version jar), when I am trying to publish a page using manage publication option, I am getting "not enough to manage the publications" message.Enabled Default Agent  and admin user has all permissions. "Page Publish" option is working fine. I have gone through below page,  add admin to workflow users group. But no luck.https://experienceleaguecommunities.adobe.com/t5/adobe-experience-manager/how-to-fix-quot-not-enough-rights-to-manage-publications-quot/td-p/389211 Please guide me to fix this issue. Thanks in Advance. 

Hi All, I've a translated language copy page 'A' created from a language master (english copy). Later If I add sling:alias and page title property value in language master page and translate the page again,1. sling:alias property is not adding up in the properties of the translated language copy page A. However page title property is getting updated in the existing language copy page.2. If I add sling:alias property value in language master page and translate it for the first time, say language copy page B, property get added in the jcr:content node.Could anyone please tell any logical reason why sling:alias is not getting added for any existing language copy page? Other page properties like page title property gets added and works as expected.I also observed if sling:alias is set/added for any language copy page from its language master page and if I modify its value in language master and translate the page again, value set in translated language copy doesn't get updated.Please

Hello Community, I am working on AEMasCS and for user authentication to my website, I am using SP initiated SAML 2.0 authentication. The setup works in a way that when user hits https://website.url, it is redirected to idpURL mentioned in saml authentication handler configuration. Therefore, user sees https://authentication.tool.url.Once the authentication is completed, the url comes back to actual website url. How can I ensure that the user always see the website url to ensure a seamless experience for user. All the authentication and waiting for authentication should be transparent from address bar point of view.Additionally, it brings one more problem that as soon as user hits base url of application it redirect to idpURL, thus user bookmarks wrong url mostly. I tried setting reverse proxy, redirections but no luck.as of now. Possibility is I am doing it wrong as I am first time working with Dispatcher. Has anyone tried it or has any inputs to achieve this b

Hi all.I do the Edge Delivery Service Commerce tutorial, but all the things was done client side.There's a way to hook helix and do something server side? There's a way to do something at markdown/markup adapter level?For example, if I instruct a block with a product category, is it possible to load the SKUs server side, during the markdown/markup adapter process, put it into the HTML before it was sent to the client?RegardsAlessandro

Along the top of Touch UI dialogs are a series of buttons. I need to configure the help button (leftmost) so it points to the documentation for the component. I see that helppath is the property name I should use according to this example from Adobe. But it's not working, and instead always points to https://www.adobe.com/go/aem6_1_docs which is not what we need.Here is the cq:dialog http://localhost:4502/apps/blah/components/events/cq%3Adialog.2.json I've tried both helpPath (works in Classic UI)and helppath, but it is not working in the Touch UI. Any help would be truly appreciated. Thanks!{ jcr:primaryType: "nt:unstructured", helpPath: "/content/blah/en/aem-support/events.html", helppath: "/content/blah/en/aem-support/events.html", sling:resourceType: "cq/gui/components/authoring/dialog", content: { jcr:primaryType: "nt:unstructured", sling:resourceType: "granite/ui/components/foundation/container", layout: { jcr:primaryType: "nt:unstructured", type: "nav", sling:resourceType: "gran

there is two tabs jpeg1 and jpeg2 i need to hide jpeg2 , how i will achive it ?  

Exploring the Sling Feature Model: Part 2 - Composite NodeStore by Perficient Abstract Now that we have the Sling Provisioning Model project converted, we can move on to the fun stuff and create a Composite NodeStore. We’ll use Docker to build the Composite Node Store in the container image. Creating the Composite NodeStore Seed The Composite NodeStore works by combining one or more static “secondary” node stores with a mutable primary NodeStore. In the case of AEM as a Cloud Service, the /apps and /libs directories are mounted as a secondary SegmentStore, while the remainder of the repository is mounted as a MongoDB-backed Document Store. Read Full Blog Exploring the Sling Feature Model: Part 2 - Composite NodeStore Q&A Please use this thread to ask the related questions.

Introduction: We all might have come across many digital screens in our day to day lives at airports/stations showing vital information to travellers about arrivals and departures. Also, at Starbucks, Subway and McDonald’s there are screens showing offer of the month and dynamic menu on their screens. Digital Signage is electronic signage that shows vital information, promotions and advertisements on digital screens. AEM Screens which is a digital signage solution in conjunction with AEM Sites and Assets offers robust capabilities to drive smart and next-gen personalization in digital signage and in-store experiences. By leveraging AEM Screens, businesses can deliver targeted, relevant content to their audience based on various factors such as demographics, behaviour, and context. A few use cases include: Smart retail displays: AI algorithms can track inventory of the store and using sensors at the shelves, it can detect which products are picked and automatically adjust the pric

Welcome to Adobe Experience Manager Tuesday Tech Bytes, your source for expert insights on AEM. Over the next several weeks, we will explore various topics regarding best practices, tips & tricks, success stories, and hidden gems. Tune in each Tuesday for a byte-sized dose of AEM wisdom!   Meet our blog authors @Shashi Kanth Mulugu , AEM Senior Solutions Architect at Deloitte, USA with 13+ years of experience in designing and implementing large scale digital transformations, specializing in cross-channel marketing and personalized experiences for various industries. He has a strong track record in delivering innovative digital solutions that align with business marketing objectives. Shashi is recognized as an Adobe Community Advisors, holding dual Adobe certifications as an AEM architect and Experience Cloud expert.   @Rohit_Utreja, With over a decade of experience currently working with Deloitte Consulting, he is specialized in AEM site development, AEM assets

Handling Http Requests, HttpClient, in AEM   by SourcedCode.com (Brian Ka Sing Li) Overview When integrating with external services or APIs from Adobe Experience Manager (AEM), utilizing the HttpClient for outbound HTTP requests is a common requirement. It’s crucial to handle these connections efficiently, securely, and in a way that is compatible with AEM’s architecture to ensure optimal performance and maintainability of your code.   AEM provides a specialized factory, HttpClientFactory, designed to streamline the creation and configuration of HttpClient instances. This factory not only simplifies the process of instantiating HttpClient objects but also ensures that the instances are optimized for use within the AEM environment. Learn More: https://sourcedcode.com/blog/aem/handling-http-requests-httpclient-in-aem  

Dear community, currently we have an AEM 6.5 deployment with the typical author, publisher instance seperation on AWS where each instance has their data store, segment store and node store on disk (EBS Volume). The setup I want to move to is having the data store which takes up 95% of the crx-quickstart/repository directory migrated to S3 and then reduce the volume size significantly to achieve cost savings. The instances should also share this S3 bucket. Our support team has set up the S3 connector as per documentation and migrated the data store, but seems to struggle with redeploying AEM on a fresh disk, installing necessary packages + code deployment and then reuse the state from the previous installation, but now with the data store offloaded. I understand that it's easier to use this setup from the start, but there has to be a set by step approach to get to this point from on existing setup, right? Would be very grateful for any high level steps on how to

Base Level User Group That a New User Group in AEM Should Be Assigned   by SourcedCode.com (Brian Ka Sing Li) Overview AEM provides a robust user management system that allows administrators to control access to various parts of the system. User groups in AEM are collections of users who share common permissions and access levels. By assigning users to groups, administrators can efficiently manage permissions across multiple users. Click here to learn more: https://sourcedcode.com/blog/aem/base-level-user-group-that-a-new-user-group-in-aem-should-be-assigned  

Understanding Adobe/AEM Franklin - Edge Delivery Services   by Ritesh Mittal       Overview Edge delivery refers to the process of delivering content from servers that are located close to the end-user's geographic location. This is typically achieved through a content delivery network (CDN), which places servers (referred to as edge servers or edge nodes) in multiple locations worldwide.   Architecture There has been an evolution in the architecture from Helix 1, Helix 2, Helix/Franklin 3, Franklin 4, and Helix 5(work in progress).     This video series explains Adobe/AEM Franklin (Edge Delivery Services) concepts, which includes-   Architecture explanation Different Delivery Stacks available Content placement strategies Content transformation and storages Content serving to end users Various authoring options available Environment and local setup, and more   The complete playlist is available at- Adobe/AEM Franklin - Edge Deli

 AEM Service With Multiple Implementation by Abhishek Anand OverviewAEM services are modular components in the AEM framework that encapsulate specific functionality, promoting a highly modular and extensible architecture. They allow multiple implementations, enabling developers to create tailored solutions for different use cases, user roles, devices, or locations. This customization enhances the user experience and increases customer engagement on AEM-based platforms.AEM services offer various use case examples, such as an Email Delivery Service for sending transactional emails with multiple implementations, allowing the platform to choose the most suitable email delivery provider. Another use case is the Personalization Service, which enables a retail website to offer personalized product recommendations by experimenting with different algorithms based on user preferences and behavior. These examples showcase how AEM’s modularity and flexibility enhance functionality a

Hi,I have the following situation: - I'm using SSR and the HTML rendered on my pages is created by Adobe IO. This app inside an Adobe IO instance fetches data from content fragments from my AEM instance. - My AEM instance is not available to the general public (it's a stating environment) - The app inside Adobe IO is failing because It can't load the content from the AEM instance.How can I fix this issue?

Hi All, I am trying to purge CDN Cache via aemcs. I do not get complete information in this document.https://experienceleague.adobe.com/en/docs/experience-manager-cloud-service/content/implementing/content-delivery/cdn-cache-purge#surrogate-key-purgeCould someone guide me with steps to purge CDN Cache? Can I purge directly by configuring pipeline in cloud Manager or do i need to run curl scripts manually to clear cache and what is the recommended way?  Thank you for your support.

Hi team,we have created a page using a template. In this template we have a checkbox which when checked should set the value to true and when unchecked the value will be false.The required functionality is working only in PRODUCTION environment but it is not working in DEV, QA ang STAGING environments.Can anyone please let me know, whether the issue is with environment configuration or  in the code.Thanks in advance.karthik

Hi Folks,       I have a requirement to add one more field in panel container section in tab component, like in below snap after Title name(Tab1) of each container I need to add one icon field pararally so that in tab it have to show icon with title name. Basically in tab component for Items container its extending from core panel container component only.I have tried to extend the panel container component but it's not working.Kindly I request to help me on this, I am not getting any reference.CC: @arunpatidar @aanchal-sikka @briankasingli  

Hello, Do we have Carousel component for forms as I could not find OOTB under /libs/fd/af/componentsit will be helpful ,if you could provide any code sample links as how could I build Carousel component for AEM adaptive forms. Regards,Srinivas

Hello, As far as I understood, the OAuth credential set up via https://developer.adobe.com/ is currently not supported for AEMaaCS. As on the other side Adobe informs us, that applications using the Service Account (JWT) credentials will stop working after Jan 27, 2025, I just wanted to ask, when this will be possible.  Thanks in advance. RegardsLars

Empowering Teams: The RDE Advantage in AEM Development by Aanchal Sikka Overview For a while, Adobe's Rapid Development Environment (RDE) has been facilitating AEM development. In this blog, we'll explore the hurdles developers encounter with the local SDK and how RDE offers remedies for these challenges.🔍 Explore the limitations of the local SDK and the bottlenecks it creates in the development lifecycle.🛠️️ Learn how RDE serves as a powerful alternative, offering a cloud-like environment for rapid development, testing, and deployment.🔧 Troubleshoot common issues with aio commands on developers' local machines when working with RDE   Check out the full blog here https://techrevel.blog/2024/02/14/empowering-teams-the-rde-advantage-in-aem-development/  Q&A Please use this thread to ask questions relating to this article

We have a requirement in AEM React SPA application, where we need to render the component for the first time using AEM component HTML, and there on the react should override it and render the react code. It's like a component having both html and react logic. I tried adding html for the component but it's not working in spa editor.

The href <a href="tel:1800813327" target="_blank"> is rewrittento  <a href=\"https://www.mysite.comnull\" target=\"_blank\">Adobe Campaign makes the following call to AEM to fetch content -https://authordomain/content/campaigns/edm.campaign.content.json The '.campaign.content.json ' selector servlet forms the html content from com.adobe.cq.mcm.campaign.impl.ContentgeneratorImpl class which uses link transformer config at /libs/mcm/config/rewriter/campaign-link-rewrite to rewrite links( surprisingly, it uses domain name in the exernalizer configuration; and not from sling mapping; should it not be using domain name from sling mappings?) and appends domain name in front of the linkHence, the href 'tel' is not working ; similarly; mailto will also not workWe have removed 'A' from includeTags in the rewrite config as a quick fix; but it excludes all anchor tag from the config. What is the appropriate method of making the tel attribute work? Can certain attributes excluded