Adobe Campaign

Hello, I want to change the sender address of my Adobe Campaign instances. As far as I know, if I want to change the "name" of the sender address, I'll have to add to Deployment wizard a mask like this " *@x.com ", so it allows me to write anything in *. Is it correct? And about change it in Message Center, i've to contact with ADobe support, right? How would I use then this new create demail direction? Thank you in advance

Hello, we're trying to do a soap call to our on premise instance, but we're getting this error: A technical error has occured: java.net.SocketTimeoutException   at org.apache.tomcat.util.net.NioEndpoint$NioSocketWrapper.fillReadBuffer(NioEndpoint.java:1264)   at org.apache.tomcat.util.net.NioEndpoint$NioSocketWrapper.read(NioEndpoint.java:1181)   at org.apache.coyote.http11.Http11InputBuffer.fill(Http11InputBuffer.java:789)   at org.apache.coyote.http11.Http11InputBuffer$SocketInputBuffer.doRead(Http11InputBuffer.java:1195)   at org.apache.coyote.http11.filters.IdentityInputFilter.doRead(IdentityInputFilter.java:97)   at org.apache.coyote.http11.Http11InputBuffer.doRead(Http11InputBuffer.java:244)   at org.apache.coyote.Request.doRead(Request.java:642)   at org.apache.catalina.connector.InputBuffer.realReadBytes(InputBuffer.java:303)   at org.apache.catalina.connector.InputBuffer.checkByteBufferEof(InputBuffer.java:615)   at org.apache.catalina.connector.InputBuffer.read(InputBuff

We frequently get this error in the delivery log. This error is blocking the delivery.In the error here below I have substituted the real image link (that is correct) with IMAGE_LINK for privacy reason.If I copy and paste the same html into another delivery everything works fine !Do you have some suggestions ?Example 1 27/10/2018 06:31:03 SCM-120009 Key value 'IMAGE_LINK' is duplicated for elements 'Image (image)' of the document being edited. Please rename on of the collection elements. Example 228/09/2018 22:12:00 XSV-350122 An error occurred and the process has been stopped.28/09/2018 22:12:00 SOP-330011 Error while executing the method 'PrepareMessageImpl' of service 'nms:delivery'.28/09/2018 22:12:00 SCM-120009 Key value 'IMAGE_LINK' is duplicated for elements 'Image (image)' of the document being edited. Please rename on of the collection elements.28/09/2018 22:12:00 SCM-120009 Key value 'IMAGE_LINK' is duplicated for elements 'Alternative source (alternativeSrc)' of the document

Hi All, I am attempting to store contextual data within the propositionVisitor schema or, if feasible, the Visitor schema using the storage feature available in the offer space. Please see the attached screenshot for further details. Could someone confirm whether storage is possible for Visitors, or is it restricted to identified recipients only?I have extended both the interaction and propositionVisitor schemas to include new attributes, and I can successfully use these attributes for offer eligibility. Offers are being proposed successfully following this configuration without any errors.  ThanksSankar

Hello, we are gathering data on all workflows in our Adobe Campaign instance and wish to include the execution schedule for workflows which have a "scheduler" activity, e.g. "Triggering at 9:00:00 AM, Daily". Please see attached screenshot. We have been unable to identify a field in the workflow activities schema that provides this string which is shown in the "scheduler" activity. 

Dear community leaders!@parthasarathy  Around 188,000 recipients are coming from inbound transition. From these recipients, we should target 20,000 recipients on Day 1 to Day 3 (3 days), and 168,000 recipients on Day 4 to Day 8 (5 days). From Day 1 to Day 3, the data for 20,000 recipients should be sent—11,200 to Gmail users and 8,800 to other email users. From Day 4 to Day 8, the data for 168,000 recipients should be sent—94,080 to Gmail users and 73,920 to other email users.  Please help to resolve this issue.  

Hi,  We've trying to do a build upgrade from 9356 to 9383 but found some errors during the way.  We are having the following error after executing rpm --nodeps -Uvh nlserver6-v7-9383-x86_64_rh8.rpm:  [root@ln01adcdes02 ~]# rpm --nodeps -Uvh nlserver6-v7-9383-x86_64_rh8.rpmVerifying...                          ################################# [100%]Preparing...                          ################################# [100%]Updating / installing...   1:nlserver6-v7-9383.0.0-1          error: failed to open dir neolane of /usr/local/neolane/: Not a directory################################# [ 50%]error: unpacking of archive failed on file /usr/local/ne

Hi We are having JSON data having Transaction Date attribute but the values in format of 20250122160808(YYYYMMDDHHRRSS).So i need to change to (for Eg 2025-01-22 16:10:58) YYYY-MM-DD HH:RR:SS This format.How i can achieve this using JS code.

We are building a process that will ingest a file of values from a source. Our intent is to use this data to produce a drop down list in a form for some data entry. This is accomplished via an Enumeration set as the dbEnum value that drives rendering. As values may be added and removed from the source, we need to be able to do the same with this Enumeration. Decisions on whether to use a truncate and reload vs an incremental load strategy are TBD, but we need to understand the options. Is there a way to add/remove/clear an Enumeration's data via JavaScript?

Hi AllWhile trying to run a JSSP in adobe campaign classic v7, I am getting below error.XML-110009 Unable to find the element 'Body' of path '/' (document with schema 'SOAP-ENV:Envelope') Could anyone help me on this. I am trying to offer using soap call as per the adobe documentation.Integration via SOAP (server side) | Adobe Campaign. Thank you

Hi Adobe Team,I am using the Data Loading activity in Adobe Campaign Classic v8, which includes a column for studentid. Upon analyzing the data, I noticed that the studentid column contains blank values.I have configured the following settings:Allow Null: Set to "Always populated."Error Processing: Set to "Ignore the value."However, I observed that the entire row is being rejected instead of ignoring the blank value and processing the other column values. I am unable to understand how the error processing works, despite reviewing the Adobe documentation.Could you please provide clarification on the following error processing options and how they function?1. Ignore the value2. Reject the line3. Use a default value in case of error4. Use a default value in case the value is not remapped5. Reject the line when there is no remapping value Thank you for your assistance.@parthasarathy 

Is there a way to activate push notifications (Campaign Standard) on Flutter?The SDK includes the messaging extension but I can't find if it can be used with ACS as it is for AJO. 

Hi Adobe teamKindly help me to understand below options with an example.In control typology, under the "Phase" category, the available options are: At the start of targeting After targeting At the start of personalization At the end of analysis  Under the "Level" category, the available options are: Error Warning Info Status Verbose @parthasarathy  @sukrity_wadhwa 

Is adobe Push notifications available in Flutter platform?

Hi Everyone, I’m learning about input forms. I have 6 parameters, and I want the second parameter to become visible as soon as the user starts typing in the previous parameter. For example:When I type something in Parameter 1, Parameter 2 should appear, and so on for the rest. This functionality works fine in navigation hierarchy when the Tab key pressed, but it is not working as expected in delivery.Can someone help me resolve this issue? Here is my input form code:<container type="visibleGroup" visibleIf="EV([../@customSubChannelType], 'Other')">                  <container label="Personalization value details" type="frame">                    <static>Please fill Personalization details here.</static>                    <container>                  &nbs

I've run my workflow. It looks like it has finished, but I don't see the delivery it generated.In v7 there you could see those in the deliveries section , on the right in the campaign general info. In v7, you could see that here:  

Hello, i'm having a problem while sending push notifications. I get the error "Failed to identify developer account, please check your ID and password".  When I check the mobile application and run the Test Connection method, it works properly, so I guess it's well configured. What am I missing? I created the Mobile App, added the information and loaded the project JSON, is there anything more I should do?  Thank you in advance  @parthasarathy @_manoj_kumar_ 

Hello, This is my problem Why after deduplication (100k users) shows 49k more users when the delivery is sent. Can someone explain what could be happening? Thank you

Hi All,I need help A technical workflow should be created that performs a daily check to send alert when the Campaign is Stopped and the workflow is Stoppedplease help to suggest me the query condition--please this is very urgent for me @parthasarathy @_manoj_kumar_ 

Hi, I have a use case whee I have to use the APIs to list the audience present in adobe campaign for my organization. This data is then used exported to an external service.I have looked in this documentation . This seems to only expose profiles, services and workflow although there are a lot more resources available in adobe campaign like, email template, images, campaigns etc.Is there a way to get this information, is there any documentation that I have missed?Thanks!!

Hi All , i have below 2 questions, 1 ) How does tracking is captured when a specific link is clicked by Recipient in email, what is end to end backend process . Can i get a explanation? 2) How do you we know if a user opens a email , how it is captured by ACC. Thanks in advance

Hi, I'm trying to call a subworkflow, that queries the nms:recipient table, based on varying variables passed into the sub workflow. This all works fine, but when returning to the parent workflow, I can't do much with it. Trying to do things like enrich it, or even something as basic as split it. I get errors generally relating to missing schema definitions, i.e.XTK-170024 The temporary 'temp:subworkflow-jumpin' schema is not defined in the current context. Is there any way I can tell it what it's being passed is the result of a query on nms:recipient, or is there some other configuration that's required?

Dear ACS Experts, We are working on a business case. It is kind of distributed marketing where a central head body designs and defines a campaign and sends out communication to local agencies for enrollment. If local agencies opts-out of the campaign, the email communication won't be sent out to the customer of those agencies. We have created a custom resource to capture the consent of agencies whether they want to be enrolled or opt-out(if agencies does not opt-out in an stipulated time-frame, they'll be automatically enrolled in). Can someone please guide me the most viable and efficient way to capture the agencies consent in the custom resource? I tried with acquisition landing page, but custom resource attributes are not present in the fields to update.

 This is a request to understand the differences/permission access between these roles .can someone please explain? Administrators RoleDeliverability RoleDelivery Supervisors Role        Standard Users Role   Support Role   Workflow Supervisors Role  

We have recently transitioned our SMS program out of ACS and believe we have all workflows turned off. However, in the subscription extract we are pulling down daily, I'm finding subscribe and unsubscribe records still populating. Looking for some guidiance on how else to find possible workflows that we missed or if there is something behind the scenes we need to turn off.