Adobe Target

Hello,I'm running into issues when trying to save a collection that I built using the 'Advanced Search' featured within the Adobe Target Recommendations tool. I've narrowed down my products list by applying a number of search rules but when I click the 'Save As...' button, the Collection and Exclusion options are grayed out. Any ideas why?Please advise.

Hello guys,Anyone knows why I have empty Result form the code below for some pages despite i have the same payload?adobe.target.getOffer({"mbox": "api_courses","mbox3rdPartyId":digitalData.user.id,"at_property":'xxx',"params":{"message": "Accountancy"},"success": function(offer) {console.log("Result: "+JSON.stringify(offer));},"error": function(status, error) {console.log('Error', status, error);}});  

Hi there!Would you able suggest a solution for below scenario?We have an e-commerce site which caters to B2B and B2C customers. We are capturing entity info via mbox for Recommendations. When a customer lands on the site he can view all the products across the entire range as an anonymous visitor. However when he/she logs (esp. B2B customers) only some products are visible to them as applicable based on their industry/customer type. This is decided by Viewcode. Certain viewcodes have certain product catalogues applicable to them.Requirement is that In the recently viewed recommendations we donot want to show products that the customer visited in anonymous state if it is not applicable to his/her viewcode. How do we do this? Additional info: We are sending logged in status, product id,  ViewCode, account type and other details as entity parameters. Problem is we cannot send multiple viewcode in an array format or so to Target. When a second customer with same Viewcode logs and

Hello, I am currently experiencing an issue using the Adobe Experience Platform Debugger tool. I am receiving the following error when trying to open up the Target --> Configuration panel:   I get here by going to the website page I have my target activity running on. Then I open the AEPD tool extension, select Target, and then select the Configuration panel upon which I receive this error message. Typically in the past I would get to the Configuration panel, flip the Target Trace switch and then reload the page to Trace the experience, but I can't get there based on the above error.   If I manually go to Adobe Target Administration --> Implementation settings, I can use the Debugger Tools mboxtrace parameter (pictured below), add it to the end of my URL and run the page i have my Target activity on again, at which point I do see the Target Traces show up on the AEPD, but still get an error if I try navigating to the Configuration panel.   At the end of the day I

I am new to Target and have been trying to create an activity like an A/B test to track CTA clicks.   My CTA is in accordion cards, with a use case like whenever a user hit "More Information" then the detail about the respective product will expand in accordion and will also show a primary CTA button (named XYZ PRODUCT), actually navigating to the product link.  However, when I am trying to set the Goal metric by selecting the clicked elements that I want to track then I am unable to HIT to expand this "More Information" button to select my JS primary CTA (named XYZ PRODUCT). Any suggestions will be helpful to understand this.    Thanks  

I'm playing with data providers in target and face an issue when try to send array to target. I'm getting error“Invalid Json. Location: line - 1, column - 653.” And it corresponds with array as value for property this one is fine "param1": "test", "param2": 123 but payload like this causing error  "param1": "test", "param2": ["test", "test2"] In documentation is says "params: A JSON object ... " and my payload is a valid json object    

I'm trying to find some documentation to see if there is code that I can execute when a failed action occurs. I'd love to be able to send information to the dataLayer so I can start tracking these at scale. I can certainly observe those failed actions that happen in my own testing, but I don't believe there is a way to report on these in Adobe Target. I don't have Adobe Analytics; is there a current method to report on these failed actions events in Analytics for Target? 

Hi! We have set up an experiment on our server-side using Target Java SDK. We are returning an experience for users, however 2 things are happening:The experience isn't sticky. If a user logs out and then back in, they will be randomly assigned a new experience. We are currently using our company mboxthirdpartyId to keep this sticky, however not working as it should.We are not seeing any visitors, visits, impressions and conversions in reporting.Is there a data point that the reporting dashboard hooks up to specifically in a request/response? We're only logging empty responses, no offer, (to control log volume), but here's an example request/response...please help and thanks! If there's anything here that might tell you that this data will not be sent to Adobe Target, please let me know and thanks!   CLIENT_ID: 000726153 IP_ADDRESS: 71.233.1.76 LOGGER_NAME: com.fmr.pwi.hades.api.common.service.AdobeTargetService LOG_LEVEL: WARN LOG_SESSION_ID: 602ea62b0a

AM using AT.js_2.10.0 and observed that the Visitor Count in the Target Report using “Adobe Target” as report metrics is not getting incremented. May I know how Target is incrementing the count. To increase the count, doing the following :Logging via new incognito browsersClearing the cookiesReturning after 30 minutesStill am not seeing the count is increasing. Is this feature dependent on “adobe.target.triggerView=ef”? Please let me know if anyone has faced this issue. Thanks for reading! Thanks,Tulasi.

I am trying to locate the standard deviation calculated for an A/B test variants? Where can I find those in the reports?

Does anyone knows what and why this error comes up in console?

Hi Community, I created an experience targeting with 3 experiences in my activity and have a CTA image that navigates to a registration page. I am curious how I would evaluate the success of my registration from these 3 experiences. As far as I know, I can only select selectors from my experience pages not from the navigated registration page. Any thoughts? @alexbishop @pratheeparunraj 

Hi I need to integrate Microsoft Customer Insights to Adobe Target for sharing the audience. please help me out to understand how is this achievable and what were the best practices for it. 

No text available

I am new to Target and trying to understand category affinity. I have categories on the web like below. How should I use this audience now in activity to evaluate my favorite category? How will results look like in activity? And, how the activity will be created using category affinity?

As per https://experienceleague.adobe.com/docs/target/using/activities/priority.html?lang=en, a visitor only stays in an A/B test until it converts. If this is true, how come we see more orders than visitors in an A/B test that is set up with a primary goal as Revenue? Our revenue gets tracked along with order in Adobe Analytics.  

Hi all,  i was wondering what's the bast way to handle content delivery error with Adobe Target. E.g. if the page structure changes and the content of an A/B test cannot be displayed correctly what happens? The Target activity is called but a default content is showed or the page can appear as "broken"?  Thanks 🙂

I have a client who wants to automatically deactivate an A/B test once it reaches a certain amount of page views.Is this possible?

Hi all,  I am looking for some help on a campaign I am looking to set up. We want to be able to change the content in the hero banner of our homepage for returning users based on the previous URL set they last viewed.  For example it is their second visit and the last page they viewed was a product page for pets. I want to now show them a specific message relating to pets on our home page.  Setting up the content I am comfortable with but its the targeting and audience setup that confuses me.  I know that I will need to use the returningVisitor under visitor profile in the create and audience section. My question is what do I combine it with? Another question is what activity type would I use in target, would it still be an a/b test?My understanding is that this would be personalisation? For example we may have 5 pages relating to pets so how can I target users that were previously on these pages? Thanks in advance.

Hi All,I am passing velocity variables like $e.name to JS and able to retrieve the same. But, I was also passing $entities to JS and was able to retrieve which all of a sudden is not working anymore. Could you please suggest what could be wrong in the below snippet and any alternatives? #set($entitylist=$entities)<script type="text/javascript">var listofitems= "${entitylist}";console.log(listofitems);</script>

Hi All, We are trying to delete/Archive our Adobe Target activities from past (We have activities from 2012 ), are there any industry standards or best practices around this? .Does deleting/archiving old activities make any difference in activity search ? Currently , it takes a lot of time to pull up an activity search . We think it is because of the high number of activities in the target workspace and it's taking a lot of time for API to get the activity

Traffic split 50/50%, but while analyzing data it shows sample size mismatch how to address sample size mismatch.We have restarted the test by duplicating original test and then activating new one and paused the old test.

I'm setting up an XT on our checkout which is built on React. My XT changes a bit of copy that appears on every page, so I'm adding additional pages to the experience. I have included to include the base URL in the page delivery for the first page in the experience. I've experimented with the first 3 pages of the journey just to see what's possible. The change on the 1st page renders ok, but when you click through to the 2nd page the change isn't there until I refresh my page. Same for the 3rd page. We use the VEC, and we have version 2.10.0 of the at.js. Help!!!!!!

Hi, I am getting the below warning and in addition a network error for loading global mbox. Any idea what is happening here as it was working fine till morning. Warning: utag.js:210 AT: Rendering mbox failed target-global-mbox Error: Network request failedat Tt.n.onerror (utag.js:210:10139) Error: