Welcome to the Adobe Target Community! Connect with peers to ask questions, share best practices, explore release updates, and contribute ideas that shape the future of Adobe Target.
Recently active
Description -Currently in order to use zip codes for audience creation you must enter each zip code on its own line in the Target interface. It would be a time saving feature if you could upload a CSV of zip codes rather than having to enter each zip code on its own line.
We are trying to tidy up our Recommendations catalog - there are a lot of old Collections that we would like to delete, but we are unable to as they are still being referenced by old activities. It's starting to slow down our productivity and as many Collections have similar names it's difficult to see which should/shouldn't be used. Ideally, when you open a Collection, it would be good to be able to see the activit(ies) are using/referencing that collection.
Hello, We're observing the flicker issues on page when Target loaded through GTM after accepting the cookie consent from the user. have added the pre hide snippet with modification which check the one trust consent still it's happening. Any input's to avoid the flicker Thanks
I have a case to implement.User visits www.xyz/en_in/a.html from (India)On the page there is a country drop down, User selects a country(US) from it now User gets navigated to www.xyz/en_us/b.html.Now I want to show the US specific targeted content to the User, How do I implement this? As geolocation is India only , How to create audience for this specific case? Thought of saving the country code in cookies when User selects country in www.xyz/en_in/a.html and later use that country code in audience but that did not worked. Is there a way to implement this scenario?
Hi, Is it possible to use Adobe target to resize images on the homepage ? If yes, what are the steps ? Thanks.
we noticed this morning that we are getting this error: when our websites load (it is happening to all of them)we were debugging some sites yesterday, so we are sure this is new.And no changes were made in Target´s settings, and Launch.What can be the cause of this?
Greetings Adobe Target Community! Please join me in congratulating your Adobe Target practitioner peer, Rajneesh Gautam (aka @rajneesh_gautam_) for being recognized as the Adobe Target Community Contributor of the Month for December 2023 ⭐ @rajneesh_gautam_, thank you for driving productive discussions with your Community peers and for further extending your expertise as an Adobe Target Community Advisor and an Adobe Target Community Mentor ~ your contributions are tremendously helpful and drive major impact across your peers' work streams 👏 Click here to check out who our Top Contributor was last Month, and be sure to stay tuned to find out whose contributions stand out in the month of January! Cheers, Amelia
Hi everyone,I just ran into an implementation of Target and Adobe Tags/Launch where the actual Tags script is being invoked from GTM (yes, from Google Tag Manager). So basically a tag in GTM is injecting the Tags script into the page.What I am wondering is:1) How much of an impact or what unintended consequences can I expect from such an implementation?2) If I happen to have rules in Tags configured run WebSDK calls to send data to the Edge Network and then to AEP, should I expect a significant delay in those calls?3) How would this type of implementation affect other Adobe products running from Tags, such as Target?4) Are there any official Adobe document that recommends staying away of this configuration where one tag manager is calling another tag manager, not as a temporary solution, but for a long term production environment?Any guidance would be really appreciated!
Description - Create a new Product Role in Adobe Target that gives a user all the capabilities of an Approver with the ability to access and edit Administration settings, while then also removing an Approver's ability to access and edit Administration settings since they impact all Workspaces, not just the ones where the user has Approver access. Why is this feature important to you - We've have several instances where someone (there are no logs even available for us to pinpoint the user) changed an Administration setting without alerting anyone that then had a negative impact on all Workspaces. This has left us scrambling on a few occasions to pinpoint the issue - with no control on limiting access to these settings to our true Adobe Target admins. How would you like the feature to work - As stated above, remove an Approver's ability to access/edit Administration settings and create a new Product Role (perhaps just naming in "Administrator"), who has all the a
Is there any way to make a copy of A/B test into XT test? OR if I want to convert A/B test into XT what will be the best way other than manually doing it?Thanks,Gauresh Kodag
Hi Everyone, I have an Angular application and I am running an XT activity on a page that has a section that is 3 cards in a row. Each of these cards is a link to another page. Each of the cards also has a click event binding to run a pre-defined function if/when a user clicks on any of the 3 cards. On the original page (before any personalization is applied) the click event binding works as expected, with the pre-defined function running as it should. However when I use the XT activity to change only the order of the cards and navigate to the page (while activity is live and personalization is applied) when I click one of the cards, the click event binding is no longer firing the pre-defined function.How can I ensure that, when I use this activity, the click event bindings still work as they should?
Trying to test two "checkout" flows – the original which is super lengthy consisting of several pages and a more streamlined variation with half the pages. How would I set this up?
Hi everyone, I'm having a problem with an ab test. After implementing the content via the "insert after" option and sending my activity live, in some cases the content appears duplicated.This can be resolved by deleting cookies. The <div> tags that target adds have different action_content ids for individual ab test versions. How can I solve the problem?Thank you
I have an experiment where, upon log-in, 10% of a group of customers will see a new experience. I have a custom audience rule that looks for "hasactivehealthplan" equals True, which is a value that the site applies to relevant customers. However, Target is firing before the website sets this value, so it thinks everyone is an "activehealthplan=False", meaning no one is getting to see the experiment. Is there a way to delay Target so that it waits until "hasactivehealthplan" values are set? I think it's only like a 5 second delay...
I am trying to configure A4T on a Sandbox Target.When I try to edit an activity in Target, it says "Target is the only reporting source available. Please make sure you have Analytics or Customer Journey Analytics enabled in order to be able to use it as a reporting source instead"I go to Administration -> Reporting and try to find A4T-related items, but there are none. I don't see them on the other tabs, either.I have access to Adobe Analytics, and I am an Approver in Target. They are both added as extensions to Adobe Launch, together with "Experience Cloud ID Service". I created a report suite in AA, and the application is sending data there.Could you please suggest what I should do to enable A4T?
I’m trying to track conversions on a website using WebSDK, so that we can feed purchase behavior into the recommendation algorithms for “..bought this, bought that”, etc. I was reviewing the implementation guide here https://docs.mktossl.com/docs/target-dev/developer/recommendations.html?lang=en, specifically the Track conversion page here https://docs.mktossl.com/docs/target-dev/developer/client-side/at-js-implementation/deploy-at-js/implement-target-without-a-tag-manager.html?lang=en#track-conversions, but the code referenced is for at.js and not WebSDK. I also checked this page WebSDK comparision to at.js - https://experienceleague.adobe.com/docs/experience-platform/edge/personalization/adobe-target/web-sdk-atjs-comparison.html?lang=en#using-web-sdk-4, but it’s not clear in this documentation how this would function in the context of order confirmation? E.g. alloy("sendEvent", { data: { __adobe: { target: { orderTotal: 123.45,
Hello Community!We request your help with some questions, currently we are presenting some questions from the company. Is there a way to create a carousel from Target, with a "+" icon and from there the products can be added to the cart?That is, I already have a carousel with the products of my recommendation and the customer can add 2-3 products from that same carousel and then those products can be seen reflected in the cart.Whether this is done through JavaScript or code you can create from Adobe Target
Hello Team,We are currently working on a proof of concept (POC) where we intend to use the AEP audience and profile attribute in Adobe Target. We plan to consume the audience and profile attributes in an m-box, which will be consumed for a mobile app using API.However, we are having difficulties using the delivery API to call such mbox, which uses AEP audience and returns profile attributes. We've noticed that such AEP audience reflects as platform segments rather than actual attributes. Could you please guide us on whether the delivery API supports the AEP audience and returns AEP profile attributes? If not, would we need to explore any other API (AEP Web SDK) to accomplish this?Thanks.
I only see page views, average time on site, and custom scoring populating as the possible engagement metrics to be added to this test, and I need to track the bounce rate as well. I can't use AA as the reporting source for AP tests, so I am seeking best ways to track with target.
Hi There,We are not able to access output of profile scripts in different domains using target global mbox. Could anyone help me understand how outputs of profile scripts can be shared between domains. Thanks
Hi , I have a scenario where there are 6 audiences , all 6 audiences are overlapped with each-other. example: There are bath,tools, power, hardware ,floor, electric these are 6 audiences. Bath audience is having other audiences with 80% overlap , similatly tools audience is having 80% over lap with other 5 audiences etc.So, Now i am working on creating AB test where bath audience should see bath page, tools audience should see tools page and so on.Can anyone explain me the rules to create AB test in adobe target.Currently i am working on rule (if bath audience or (bath audience and tools audience and power audience )will it work in AB test? I have one more issue with AB test is even if i am adding multiple audiences, bath is having all audiences, tools is having all audience .... and so on.Please suggest a good solution for this type of scenario . Thank you
I am trying to understand how would a histogram look for controlled and treated groups? Why do we have a negative lower lift for RPV metric? Is there a visual graphs I can go through?
Hi Community, As I try to paste the authorization token to the web URL to analyze the mBox trace it saysis it because of 3rd parties cookies depreciation by Google? because in the incognito window, it has started saying
Hello,Looking for some support/insight from anyone that has utilized the Auto-Target feature within an A/B test. My test has been running for quite some time and I've reached the necessarily visitors and conversions levels needed for my algorithms to begin learning, 1,000 visits and 50 conversions (7,000 overall visits and 350 overall conversions) as I understand them. However, my reporting is still stating that the models have not been built yet - as indicated by the clock icon still next to my experiences. I'm also not seeing the Important Attributes report nor the Automated segment reports that are supposed to come along with this tool....presumably because the models are still being indicated as not finalize yet? This test has been running for over 80 days and it seems to be collecting the right information, but no models and no reports yet, any ideas? Are the experiences just too similar for the AI to pick up anything and create a model from? Appreciate any thoughts or commen
Hi, In Target Audience, there is an option of Repeat visitor. So, what's the exact definition of it in case of APP( Android and iOS)?
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
