Adobe Target

Hi all, I have observed quite a strange behaviour. I am sending product information using a similar method to below. Products can be found using advanced search, but after approximately 2h these products disappear from catalog. I am populating the entity.geofocus property to enable segmentation (setting to "recs poc").I can't figure out what is causing disappearance. Example of the payload is provided below. I would appreciate if some could help me to figure this one out. Thank you. function targetPageParams() { return { "entity": { "id": "32323", "categoryId": "running-shoes", "value": 119.99, "inventory": 329 } } }  

Hi, We are testing adobe target (at.js 2.11.4) in all browsers and we have realized that in Safari(Version 17.5 ) if we enable: use advanced tracking and fingerprinting protection.(Advanced setting). Adobe Target will not work/load Is there any workaround? is Adobe Target team aware of this? Thanks,Ricardo

We are trying to deliver a MVT in Target and the requirements are as below:1) Change the layout of an opt-in element lead form2) Change the verbiage of the same elementWe are able to change the layout using VEC in a AB test(using arrange/move), but we cannot seem to do the same using the VEC in a MVT. Could anyone please let us know the best approach here?

Greetings Adobe Target Community! Please join me in congratulating your Adobe Target practitioner peer, Karuppiah Sakthivel (aka @karuppiah_sakthivel) for being recognized as the Adobe Target Community Contributor of the Month for April 2024! @karuppiah_sakthivel, thank you for driving productive discussions with your Community peers ~ your contributions have been tremendously helpful!     Click here  to check out who our Top Contributor was in March, and be sure to stay tuned to find out whose contributions stand out in the month of May!   Cheers, Amelia

Hello team,I am an Adobe Consultant, and I would like to write a blog post to share knowledge of what I know.Could you please provide the access? Thanks.

I have 2 separate XT activities with different audiences where I have added custom code (page load event) for the two activities. Both activities are applied on same location and have different priorities, But I see that even though the Activity/Experience is hidden because of priority still the page load event is added and getting fired.Is there a way to determine that XT/Experience is hidden or visible in profile scripts, so that I will increment the counter only when the experience is visible.Is there a way to not render the content of hidden activity when the activity is de-prioritized?

I saw this multiple choice question in the practice area for Adobe Target certification."In what scenario is it most appropriate to run an Automated Personalization Activity?"As an Activity that records data in the background with minimal collisions.In situations or strategies that require the least amount of time to give a successful return.In situations that require a lot of time to gather and analyze a sizable amount of data.In every situation in which a Multivariate Activity is useful.I didn't understand why the right answer was A. Can someone explain it to me?

I have two servers, a stage.example.com and example.com (a production site).When testing an experience on stage, is it possible for the content to appear on production?Here's the setup scenario.Activity Location: stage.example.comor any page where /sub-folder/, /purchase/and url is not https://stage.example.com/sub-folder and url is not https://stage.example.com/purchase  (no trailing slash intentional)HOW is it possible when experience is live on stage that it can be seen on production?  

How do I target all pages that match a pattern in Target's Page Delivery?I'm needing to match 100's of pages that match like this for an A/B test:example.com/path-name/example.com/path-name/product-name I tried example.com/* and example.com/*/*  but it didn't work. Thanks!

We have one page where listing component is authored. We want to do A/B testing between two different views of listing.Both the views comes from two different components. Option 1 :- This is simple view, Only clickable namesFirst optionSecond optionThird optionOption 2 :- we have image and CTA with little desc First view will display option 1 and second view will be display option 2For experience 2 we will replace option 1 with experience fragment which will include component of option 2.Is this approach is fine or something better can be done ?

Hi, I need to set up an A/B test for three different pages redirecting to three separate URLs (Page A redirects to Page A', B to B' and C to C'). Is there a way to do this in the same Target Activity? Or would I need to have three different Activities for each page? Thanks!

We have our target opacity set to 3000ms, as default set on the body element. This is affecting the LCP (Largest content paint), and SEO speed of the website.#1 ) How can we avoid flickering or have an optimal opacity setting that does not affect LCP#2) Is 3000ms the adobe default?#3) Has anyone have less than 3000ms and have an optimal LCP reading? or should we set the opacity on a different element, to avoid flickering, but still have LCP load fast 

Hi Community members,I would like to know what would be the right way to integrate Demandbase with Adobe Target. I have checked below demandbase document for the integration but it seems very old. Could anyone help me understand if there is a way to implement this.I would also like to know if we can done the same integration with the help of Adobe data providers.Set Up the Adobe Target Standard UI Integration – Help Center (demandbase.com)

How does one delete an Experience Fragment Offer from Adobe Target? All other Offer types (HTML, JSON, Remote, etc.) are able to be deleted via the trash can icon, but for Experience Fragment Offer the trash can icon is not available.

Hello, I am trying to set up a Multivariate test with 4 Locations all in the Hero space.  Location 1: Background ImageLocation 2: H1Location 3: Body copyLocation 4: CTA The issue I am encountering is that whenever I attempt to update the background image via the HTML for that hero container, it completely overrides the other locations as they are also located within the same container. How can I get around this? Ideally, I would like this test to rotate all of these locations to determine what the best hero experience is for our users. Thank you.

Hello everyone, we are looking for what could be the cause why activity reports are not collected. We are currently launching this tag on page load using Google Tag Manager and executing the sendEvent as follows:Could you help me to understand if we are missing any param or var? Why are not getting the reports?A lot of thanks!

Hi, I am using adobe test and target in my react webiste using the adobe experience manager. I have embedded one adobe launch js script which calls in the adobe analytics and test target scripts to render AB test on my homepage. Lately I started testing the MVT tests and the preview links and live urls render the MVT only on second load in multiple browsers and incognito modes. Hoping to find any help available on this subject that can unblock me in this issue. Happy to provide any inputs regarding the tech stack or adobe configs. 

by Christopher Davis and Kevin Scally This is Part 2 of our series on Target Activity Reporting FAQs & Troubleshooting which focuses specifically on using Analytics/A4T as the reporting source. Check out Part 1 of this Series which covers Using Target as the Reporting Source, and Part 3 of this Series which covers Using Third-Party Tools as the Reporting Source. Unstitched Hits   When using A4T in an at.js + AppMeasurement.js (non-Web SDK) implementation; it is important to understand how data is collected for A4T.  Target generates a Supplemental Data ID (SDID) that is sent as part of the Target request. This ID is used to link data from the Target call to the page's Analytics call (what activities were returned, what experience the visitor is in for each activity, etc.). Second, note that Target fires at the "top" of the page (as content begins to load), while Analytics is fired at the page bottom (after the page's content has been delivered). Due to this differenc

We created an experience fragment in AEM and exported it to target in JSON format and created an activity in Target using the JSON xf. We use getOffers method as per adobe document in AEM using react in SPA to get the JSON data on webpage. https://experienceleague.adobe.com/en/docs/target-dev/developer/server-side/node-js/get-offers#:~:text=Example-,Node.js,-const%20TargetClient%20%3D Without adding Audience to experience we are getting JSON on webpage. But when we add Audience to Experience, we are getting response but JSON xf(offer) is missing in JSON. Do we have to pass anymore parameters? We use the same code mentioned in document. @alexbishop @gokul_agiwal @ryanr7 @pratheeparunraj @ambikatewari_atci    

Hi,  I would like to debug last seen Recommendations built in Target. My page is SPA and some products are duplicated in recommendations. I am using Profile API to see which products has customer seen. Is there any way to get the list of last seen products using API or that in the below screenshot is all? I am fetching the product using ECID    

Adobe documentation mentions about using Adobe Launch for integrating with Adobe target.   Queries: For creating Adobe Launch IMS config in Local AEM Cloud SDK, which API should be configured in https://developer.adobe.com/ ?     What is the purpose of Target API? I was able to integrate this, but confused with the purpose of separate Target and Launch API ?

Hi everyone,I have a stakeholder who wants to run an AB test which involves removing a panel from a page on our site. The panel is near the bottom of the page, and it has a few UX issues.Their hypothesis is that removing this panel will not have a significant impact on users finding the content featured on it, as users will find the content through other navigational means.I'm trying to establish how we can be confident that the removal has had no impact. When looking at the Adobe Statistical Significance calculator, I get an "Infinity" in the number of days when I put "0%" in the expected uplift field.Has anyone had this issue before/come up with a way of establishing significance for a null hypothesis test.