Adobe Target

Hello, I am doing an A/B Test on our SPA website. It works perfect but when I add the HASH parameter in Audience Refinements it stops working. It does not inject my code. Site Pages: Current Page URL containsmywebsite.es Site Pages: Current Page Hash (#) fragment contains#mypage ¿What the reason could be? Regards

Good day, I want to set up a recommendation where the last bought products of the individual user are listed in descending order by date. The intention is to create a rebuy reco ("Do you want to buy this articles again?") for frequently bought products. I can see in the debugging mode that the previously bought Ids are included in the product request, but I am not able to create a critera for that. I only have the possibility to address the very last bought product, but not the "last bought products"   Thanks in advance.

When retrieving an AB report through  /{tenant}/target/activities/ab/{id}/report/performance, the response lists all metrics and reporting audiences, but there are no visit & conversion breakdowns for them. Is there a way to dig deeper by passing the metricLocalId and / or reportingAudienceLocalId in the request?(Or any other approach, of course)

Hi,  I recently ran an A/B test on two versions of the same page - an english version and a chinese version - the results were pushed to Adobe Analytics. The results are the opposite i.e. the chinese version shows that the experience B (experiment) was the winner, whereas in the english version of the test, experience A (control) was the winner. The winner is based on a conversion metric..Point to note: the chinese version of the site receives significantly more traffic and conversion. My question: - In such cases, what are some of the recommended decision rules to consider for determining if the test was successful or not?- The answer may be that it depends, but what is the thought process or better approach to deciding if the test was successful or not? Thanks!

Hi Team,   I am trying to implement A/B test in Which I have Experience A as my default webpage and I have to redirect it to other url of my webpage of same domain as follows,Exp A : http://localhost:8080/Analytics/eCommerce/checkout/shoppingcart.html?sku=201241  Exp B : I am redirecting to http://localhost:8080/Analytics/eCommerce-b/checkout/shoppingcart.html?sku=201241 Where the query string parameter(SKU) in the url is dynamically generating one.Please do guide me to Implement the redirect url through A/B test for dynamic urls of same website. Is there any other way to implement the same in Target?Thanks in advance,Sundhara Vadivu M.

Hi, We’re trying to extract all tntIDs for users from Adobe. Once this information is received, we intend to append additional customer attributes data and upload to target to create custom audiences. Given this case, can someone advise on how to retrieve all tnt IDs? Regards,Sri

Hi - Is there a way to pull a list of Target users for my organization and how frequently they use the solution?

Hey Community, Was wondering if any one ran into this issue where one person is in one activity and is working on a few experience and another person who doesn't know the other person is in the same activity working.  The last person to save it keeps their work while the other loses their work that they did.  Anyone know a way of preventing this outside of just communication between the users?  I have not seen anything in Target that would let you know that someone is in an activity currently so it will prevent you from changing it from another user. (Almost like a checking in/checking out state, of the activity being used.)  Would save my team a lot of headaches in the future. Hope that was clear.Thanks.

Hi Experts, I was working on one activity that was already live and reporting suite was Adobe Analytics. I had to change the experience name from "A" to "B" which I did, after that I saw two experiences in analytics report(workspace) and their was the discrepancy in number which i thought will go after some time, but today when I checked I am only able to see the new experience. Please help me.

Hello, I'm looking for a way to run a multivariate test on a SPA page.  I know the VEC won't work for this situation, but has anyone else had luck with a different solution?

i have a technical question , you can address it when the time is right. in At.js versions 1.8 and before the tag use to include the name of the mbox = target-global-mbox by default. but for at.js 2.2 and above has removed the need to add target-global-mbox as a mbox variable. Would you know why

Hi Team, We are performing the A/B test on a page considering control as the winning version from last test, so the variation is as follows :- Control - Winner from last test Challenger - New design oneGoal metric - Increase signupsNow the above two variation has the same design(sticky CTA on top) pointing to two different URL's1. URL - is external link which we are tracking through UTM2. URL - internal link where we have the registration CTA by clicking on which it takes to registration page in different URLWe want to track the exit to registration page now in both the experiences

I'm a bit new to Target and trying to build some guideline docs.  Can anyone point me to a 'best practice' on when to choose a regional mbox over global mbox?  

While testing my personalization activity, I've created test mboxes and parameters using Adobe.target.trackEvent(). After doing this several times, I want to reduce the clutter (excess mboxes and parameters) that appears in my audience rule settings. How would I go about deleting the mboxes and passed parameters that I no longer require? Also, does there happen to be a limit on the number of mboxes that I can pass?

Hi All,I am using mboxOverride.browserIp for validating the geo location activity. Currently we are planing to upgrade the at.js version. In the new version 'mboxOverride.browserIp' is not supporting. Can any one help me on this?Thanks,Hariharan S

We have a secure account area for visitors signed up to our business, and within that interface we have multiple mboxes hosting BAU messages and various third party advertisements.  The content of these individual mboxes are managed by different teams who need access to publish only in those particular areas. Theoretically I don't see why we couldn't pass different at_property parameters at an mbox level rather than in the 'global' via targetPageParams(). We already use getOffer() and applyOffer() for those mboxes, so I figure we could pass this new param along with all others, and change the value according to the correct property. My concern is that this involves a single 'page' (this is an SPA) having multiple mboxes , and therefore Property tokens, associated with it. Would there be issues when configuring activities and attempting to set them live for these individual mboxes with bespoke permission levels? Does anyone have any experience with this use case

Good Morning. I am fairly new to Target and I just set up my first A/B test. The test goes to different web pages to see which takes the user deeper into our site. Its working fine for my Control page but the Conversion Rate is 0 on my test page although I have selected the element I chose for my conversion goal. I am not sure why this second page is not showing conversions on the report. Any thoughts? Thank you,

Apologies if this has been raised before - happy to be redirected to an answer. We are in the process of implementing Target. Part of the implementation is to add our offline (CRM) data to the product. We have successfully loaded our data to Customer Attributes and allocated an alias which is then mirrored into the SetCustomerID rule within our Launch environment. Whilst this has now been in in place for 7 days (so latency isnt an issue) we do not see any data being passed to our Analytics and when we have set up a Target Audience for specific identifiable users the users are not seeing the experience. Question 1 - Is there a debugger I can use to login to our site and see the Customer Attributes loaded? I can see the SetCustomerID output (below) but not the data being loaded personid.:id:######### (Our known customer id used in the load)as:1 Question2 - Does anyone have an idea why the data would not be being passed to Target and Analytics? 

Hi, I am trying to understand the sample size calculator. As with the increase in the lift percentage, the no of days to complete the test is less. Example - if Lift is 15% then Days to complete test is 2 if daily visitors are 1242.So, how it is calculating this no of days. Could anyone explain how this field nos. are calculating(no of days)   

I am creating an experience in which the second-time visitors can see their interested-product on the first slide of carousel banner. The original carousel banner was created with Adobe AEM. To add a new slide to the carousel banner, I inserted AEM-duplicated HTML code to Adobe target, however when previewed, the new slide is not responsive (only showed the desktop size) while the original slides created with AEM are responsive. The reason I didn't create the additional slide in AEM because there is no hide slide function in AEM. So if anyone has an idea how to make the image responsive, Please let me know! 

Where's the Help menu link to "Documentation"? That's a basic requirement in the Help menu.

I am trying to use the Adobe Target Admin API and I have encountered the following error while using any of the admin API request:{    "error_code": "403003",    "message": "Api Key is invalid"}Note: The API key that I am using in any admin API request is same as the API key I used to generate JWT and access token using JWT.Steps followed:Step 1: Integration of Target API with public certificate in Adobe I/O console - SuccessfulStep 2: Generate JWT signed with private key - SuccessfulStep 3: Exchange JWT with access token - SuccessfulStep 4: Use the access token generated in Step-3 in an admin API request - Unsuccessful (Error Message - "Api key is Invalid")Is it because of the fourth parameter in JWT payload from API Integration is different from that provided in sample code of Adobe I/O Authentication document? i.e.Parameter in Sample code: 'https://ims-na1.adobelogin.com/s/ent_smartcontent_sdk': trueParameter in JWT payload from API: "https://ims-na1.adobelogin.com/s/example_sdk": t

Hi Experts, I have implemented ttMETA plugin using Adobe Launch. The code I have picked from target help doc.However I am seeing undefined under "MboxName":CODE OF ttMETA:window.ttMETA.push({'CampaignName': token["activity.name"],'CampaignId' : token["activity.id"],'RecipeName': token["experience.name"],'RecipeId': token["experience.id"],'OfferId': token["option.id"],'OfferName': token["option.name"],'MboxName': e.detail.mbox});RESPONSE of ttMETA:CampaignId: "318808"CampaignName: "POC"MboxName: undefinedOfferId: "3"OfferName: "Offer3"RecipeId: "1"RecipeName: "Experience B"Can anybody advise why am I getting this undefined under mbox name ?

Hi, community.We have pages on our site which we consider as "product view" in case of being visited by a user. Those pages may send not only one "global" mbox requests, they can also send several "not global" mbox requests related to AEM target components included on the page. All mbox requests utilize the same "targetPageParams" function returning entity.id and entity.categoryId values. Now the question:If a page sends, for example, 3 mbox requests having the same entity.* values, will this fact be treated by Target as if a user has viewed this product page 3 times ?

Hi, We have configured API's for Adobe Target and successfully able to retrieve the response for different calls. Is there a way we can make a call to HTML for specific campaign and pull it back in response??