Adobe Analytics

Hello,I really appreciate that the display of column titles in tables has improved. But one small issue regarding titles is still bothering me. For example in the visualization of Summary Change and Summary Number, if the title is long, only a tiny part of the title is shown (as you can see in the picture below). Mouse over is not the best solution since this would work when in Workspace but not when you export as PDF-file. I'd like to suggest a line break in case of long titles. It doesn't have to show the complete title but a wider limit would be extremely helpful. Thank you.

Hopefully a very small / easy request that would make life a lot easier. The ability to share with individual users and groups is great however on a relatively frequent basis we need to make a lot of changes and manually having to search for each user (or group) one at a time to unselect them is a massive pain. Is there a way you could add an "Unshare All" action so when we want to unshare all or unshare all to add a handful of people back on manually it's not quite as onerous?

I tend to use the analysis workspace freeform table a lot to organize my segments and metrics in a single table, a single version of the truth if you will.however I find it difficult to share these tables via email / slack because one the table gets more than 10 or so columns the column names get cut off.my primary freeform table that I'm socializing right now with internal stakeholders has 23 columnsso the question is what can be done to wrap the text within these columns headers?I would like to be able to toggle the wrapping, as sometimes it is needed and some times is it not.  a solution like this also suggests that we might be able to control the height of column headers, to compliment our current ability to manage the width of the column headersif we're going to wrap it, I prefer center alignment of the text but having the option to do left, center or right text alignment might be helpful for others.I think the way segments work across columns (cells get merged for the lack of a b

It would be useful to be able to have the option to see ranking maintained when applying a filter or segment to a report. With so many pages, we have to do a Data Warehouse export to Excel to be able to search for a page and see how it ranks.

We have many report suites, and many users, each of which can see only 1 or 2 report suites. I have access to all the report suites. I need to make a dashboard that I can share with all the users. When each user views the dashboard, it needs to show the data for the report suite that the user has access to. So the dashboard will be a template that is filled in with different data, depending on who is using it. This could be done by each user having a default report suite that will be used automatically in the dashboard, or by letting me assign a report suite for each user that will be used in the dashboard.The current situation requires me to re-create the dashboard, along with all reportlets, for every single user, using a different report suite each time. Since we could have over 100 report suites and users, this is time consuming and impractical. Thanks,Christopher Stanwood

I found difficult to select the segment in data warehouse while creating a report. Adding a Search/Filter option will help the user to search the Segment instead of scrolling and choosing the segment. Please refer the screengrab below

It would be very useful if there was a way to "expand all" processing rules for a report suite

Hi, Currently in Adobe, we use a few calculated metrics that rely on averages. We use arithmetic mean when calculating Average Order Value(Sum of Revenue divided by Sum of Orders) and Average Selling Price (Sum of Revenue divided by Sum of Units). Unfortunately, when applying these calculated metrics to a smaller population or segmented data set in Adobe Analytics, the mean does not account for outliers. It would be nice if calculated metrics had a harmonic mean function.

Need a way to show hour to date sales for comparison to last year.  If you use the YOY Basic Tempate in Workspace and click on the calendar, hour is not an option.  Please add hour as an option.

We are making extensive use of virtual report suites to manage the way we share & present data throughout our organisation.However, the lack of support for Data Sources potentially wreaks havoc on our carefully planned virtual report suites strategy.The problem is that every time a user requires access to the data uploaded via data sources (e.g. e-mail sent, opened, bounced etc.) we have to open up access to the underlying report suite completely bypassing our carefully curated virtual report suites.Please can you consider adding support for Data Sources to Virtual Report Suites?

We need a time segment that take current weekday and compare it to average of the same weekday the last 12 weeks. Eg. One section has xx pageviews this Friday - and to find out if its high or low level, we need the average of the last 12 weeks, on the same day. As we are a news publisher house, we cannot just compair with yesterday or same day last week, as everyday is affected of todays history. The segment is required to be rolling dates as we wan't to display the numbers in a data visualization app.

Currently, anyone looking to build marketing links in the Mobile Marketing Link Builder must have admin access to Mobile Services. In practice, that means that either someone on the analytics team has to build the links (which can lead to bottlenecks), or the marketers must have admin access to Mobile Services, which brings some risk as there's additional access.Can we add a level of access to build mobile marketing links without requiring Mobile Services access?

Hi Adobe Forum, When I create one segment in Adobe Analytics, I used custom dimensions (evar variables), and the "Contains" clause appears in my operator option. However, when I drag "Countries" or "Languages" (OOB dimensions) down to the criteria, and choose my operator, there is no "Contains" like derived dimensions under my option. I am wondering if this is always the case that OOB dimensions never had "Contains" operator as the option? If so, would that be possible to have the "Contains" clause under the operator for OOB dimensions in the UI? Thanks,

Often analysts question how traffic is falling into the "None" bucket, figuring all possible traffic has been configured to go into one of the defined buckets.  Having a tool to test referrer's, etc to see where these would end up, similar to classification rule builder test option, could be helpful in both configuring and troubleshooting.FYI that I typically troubleshoot via the data feed with the condition tied to va_closer_id’s set to 0 (not documented, but assuming it means hit didn't fall into any of the marketing channels).

It would be great to be able to classify standard reports.   We end up having to use custom variables to copy the reports and the data never ties exactly.

Adobe Mobile Marketing Services has great two-metric donuts under "Usage -> Technology". Can we please have thsi grpah type in Workspace, too? It is so useful to break down a donut graph further.

calculated metrics and analysis workspace projects do not have event category in Admin Logs of User Activity. would be nice to have these categorized.

When we try to schedule or to send a report using report builder (but usually with all the Adobe analytics) there is always problem with the syntax we have to use. First of all you should state which syntax you require (just with a simple e little tooltip if you prefer). Last, with the new release of report builder, it seems to me you require to remove any blank space between each email, but when you show the setting you add the space...

When utilizing freeform tables in Analysis Workspace, it's very easy to accidentally drag a dimension like "Day" into the column space when I meant to drag it in as a row. Depending on the setup, this can create many, many dynamic columns, to the point where data is no longer visible, Adobe slows while retrieving a large matrix of data, and Chrome slows to a grinding halt attempting to render everything. The only option at that point is to destroy the entire table and start over, since you can't even get your mouse in to click and select the columns to delete.Could Workspace instead prompt the user if the number of columns created is over some reasonable amount (like 30) verifying that they are sure, before rendering the dynamic columns?

if i send a workspace project by PDF (or CSV) without schedule (just immediate sending), it will produce an entry in the list of "scheduled reports". this way, the more projects you send by email, the longer get's the list. an moreover, you can not filter which "scheduled reports" are really schedules or not ...even i think this is a bug in implementation, i raise an idea to improve the "scheduled reports" list and ask for an additional filter:- "active" schedules: would show only scheduled reports which are still active, will be sent in future- "scheduled": will show all scheduled reports which have a real scheduling option- "expired": will show scheduled reports where the expiry date is in the pastfeel free to add more filter ideas in the commentskind regardsurs

As an admin, I would like to push specific calendar events only to specific distribution lists as long as we have a multi brand account.This way it would be quicker to share the calendar event, instead of selecting (and potentially forgetting) all the users interested in the event. Thanks

We're currently looking at importing offline sales data in order to help us evaluate the performance of our optimisation campaigns.  Ideally I want to be able to look at the A4T ranked report with a number of online metrics and our offline sale metric. I've attached a screenshot which shows the standard A4T ranked report and the Sales metric that is being imported using Data Sources.  Currently we're importing the sales metric as event11 and correlating with purchaseID, so when I look at the purchaseID report against event11 I'm seeing data as expected. However, if I try to breakdown A4T activity reporting by purchaseID and then tie to event11 it will show all as zeros. I'm assuming this is because the sales event is only correlated with the purchaseID but not the A4T activity report.  It would be extremely useful to be able to evaluate Target campaign performance against offline data that forms a key part of the end to end purchase funnel.

I want to be able to export/download the logs from Analytics UI. For ex: I want to export or download a log of every Custom Event from a specific reporting suite that has been published or enabled within a time period.

We run an ETL process with a scheduled Data Warehouse report as input.  When the format of this report changes between CSV and ZIP from one month to the next, it breaks our ETL process.  I would like to see an option to choose the format of the Data Warehouse report so that it is consistent every time it runs.

I build segments a lot and would like the feature to filter the comparison operator by typing. It's a small change that would speed up building segments that small amount! For example, if I wanted to apply the "equals" comparison operator, it would be great if I were to begin to type "equals" and only have options containing equals appear. This would save time by not having to scroll and look for it!