Adobe Analytics

Hi, I am building a Analytic report to track the submission of a form. But all data are gone when I include a Page segment to filter by URL. Here is my setup: 1. Rule in AEPDC to track the form submission to `eVar1: Form Name`, whenever I submit a form on the page "https://beta.form.ca/en.html".     2. The recorded `Form Name` will then be the reported in Analytics: 3. But when I add a segment to only see the Form Name from "https://beta.form.ca/en.html", the data are gone. Note that I am using the `Page` dimension as that is where the URL values are being recorded, and I don't have the `Page URL` dimension. To sums up, all forms were submitted from the intended page URL "https://beta.form.ca/en.html", and correctly recorded. Yet when I filter by that same URL, the data are gone, as if the `Form Name` eVar is not tied to the page URL. I am more of an AEM developer so quite new to the AEP/Analytic stuff...what I might be missing, wh

Hi everyone,I have exit links OOTB enabled in Analytics extension and Link clicks Rule with  event1. I have been capturing pageName with these events and I am not capturing page Url in eVar for link click  and exit.Now , I need to create a segment for one of the section of page. I have option of creating segment based on pagename and pageUrl .If I am using pagename it is giving me more visits compared to page Url.Can anyone please tell me which dimension will be the right one to segment. Also, why exit link is increasing my visit and pageviews. ?

I was trying to analyze data for 2017 and I used data feed to get all data. It was a daily view. My question is there any way I can read that big .tsv file or is there any other format I can download the data?

Hi everyone,The  team has said that , they need visit and unique  visitors for daily , monthly view .they are not very sure about how report look like.  I have created like a aggregate like below :-visit metric (row) and for daily date range(This month yesterday and for monthly view- rolling from month start to yesterday( column). so I am just getting overall report .  Can, anyone suggest what should the report look like or is above right way?

Can anyone tell me how will be the report for traffic at the time of the day? Will this be a hourly?Traffic usually means visits right.

How will the report look like in analysis workspace for any specific link click analysis and what are the  metrics and dimensions we use to create report?

Can anyone tell me how to create report in workspace for organic vs paid traffic using marketing channel reports.

Hi community, I am helping our client to plan how to integrate Adobe Analytics to React native environment, I've search across the internet but no much detail found for how toThe official package is already deprecated https://github.com/adobe/react-native-acpanalytics , which in the doc suggest to setup the tracking through mobileSDK, but which is rather track on the app side instead of the react native webview. I've checked the old community threads, also tried few 3rd party package but no luck as well, and nor found official guide for it. Does anyone have the suggestion (or an example, even better) for integration, or is it impossible to do it now? Any info would be appreciated.

Hello - is it possible to disable the Demdex Cookie from firing and populating a UUID without breaking our ability to tie or measure users between our internal Experience Cloud tools (i.e. Adobe Analytics and Adobe Target)?  I understand this is not a traditional third party cookie, but I have some concerns with firing an ID that is being populated on both my domain and of domains that are not of my own.

Hi everyone, I have exit links OOTB enabled in Analytics extension and Link clicks Rule with event1.  I have been capturing pageName with these events and I am not capturing page Url in eVar for link click and exit. Now , I need to create a segment for one of the section of page. I have option of creating segment based on pagename and pageUrl . If I am using pagename it is giving me more visits compared to page Url. Can anyone please tell me which dimension will be the right one to segment. Also, why exit link is increasing my visit and pageviews. ?

Got to understand that Adobe intends to put an end to the report schedule delivery function which my workplace is currently still using which will affect some reporting. Is there anyone from Adobe I can reach out to extend this service? https://new.express.adobe.com/webpage/WFCyq7w8kijmB?   

Hello everyone, I am trying to connect to Adobe analytics connector 1.0 with powerBI. I need 4 dimensions as filters example-Device, State, Country, AgeAnd I have 3 measure that I wanna look at it over time example- Conversion_rate, Visitors, purchased a product(event)Here is my problem-If I pull all the above dimensions and measure and load it into powerbi model. If I start using dimensions are dynamic filters on dashboard and want to look at measure over time(month) the aggregated numbers are so different than what I see in adobe. I have tried couple of approaches with creating multiple tables with same measures for each dimension. But still couldnt get what I needed. Would be really helpful, If anyone has faced the same and have any idea how to fix this.Thanks 

Hi , I do not see the Calssification import options highlighted/allowed to select while importing calssification. what could be the reason?  

Hello,I want to create 2 websites one for domestic and another one for international with PWA. is it possible to call both websites with one URL?Explanation: Suppose i've a URL example.com and i want to call both websites with this URL.

I am adding descriptions for the data dictionary.  Some of descriptions disappear. They appear to save and I can see it temporarily.  I have screenshots of the saved definitions that later disappear.    This seems to be happening to only a subset of my descriptions and not all of them.   Is there a character limit?   Are there reserved characters that will not allow an entry to be saved.  They do tend to be some of my longer definitions.  The dimensions still show as approved but nothing else is saved.   Nothing is approved until a definition has been added.  

How to handle the segmentation of a contact in Marketo if they meet the criteria for two different segments simultaneously? What factors to consider, and what strategy will be implemented to address this dual-segmentation scenario effectively?

using appMeasurement here and I have a challenge on a page where I need to correlate two varied dimensions to an eventLet's say for example that we have a list on the page with multi-selection boxes (add) as in the table below. Here we have four items selected and being added at once (one button to submit all adds) CategoryIDActionApples123AddBanana000 Apples456AddOranges456AddApples012Add I could put both the Category and ID into two ListVars, but upon breaking down in reporting, I don't think they would end up being correlated, that ID 456 has one "add" each for Apples & OrangesShould this be solved by putting Category into a product string with the ID as a merchandising Evar ?

Hello Team, I'm exploring ways to connect with individuals who have visited our brand's profile. Our brand has a dedicated website where we track user behavior using Adobe Analytics. To execute our campaigns, we rely on Adobe Campaign Console. My goal is to send targeted emails to users who have visited our web pages within a specific timeframe or have shown active interest in particular products. For instance, let's consider a scenario: I visit a leading vehicle brand's website, browse through their new car models, and express interest by filling out a form. Adobe Analytics tracks my actions. I aim to include these engaged users in our Campaign Console to send them tailored email communications. 

I'm trying to push the numeric hardcoded value to the adobe server using the events, but the values sent is not received. I could see some random values in the dashboard(adobe). Also I'm using omnibug to check the data that is sent and I could see the proper value is transferred, but still in the adobe dashboard I'm seeing some random values. Please suggest me a proper way to send the numeric values so that the same is received in the adobe aswell. Example code snippet I'm using to send the values: s.eVar1 = 'Text 1';s.eVar2 = 'ID 1';s.events = 'event11=10,event12=1';s.linkTrackVars = keysAry.toString();s.linkTrackEvents = 'event11,event12';s.tl(this, 'o', customLink);

Hi all, I am getting this problem where the number of exits and visits tend to be same when I look for 'Entry Page' dimension. Attaching screenshot for your reference.But when page name is broken down with entry page, the metric value differ. Attaching screenshot for your reference What's the possible justification for this ?Thanks

Hi, I'm looking for a way to add the breakdown rows in a freeform table. For Context: I have created a segment which gives me the total visits on the landing of a screen and on the same screen another variable is configured which captures the keyword. I want the unique combination of the visit and the keyword.Example: If there are total 3 visits (V1, V2 and V3) and K1, K2 and K3 are 3 different keyword captured in the other variable (v9)V1 - K1 & K2V2 - K1V3 - K3 & K1 & K1 Count of Visits in which a Keyword was captured:K1 - 3K2 - 1K3 - 1Total - 5 (I'm trying to get this total from the segment)

Experiencing an error loading Adobe Analytics on Microsoft Edge. Adobe Analytics works on Chrome, however.  I already deleted cookies for adobe.com in Edge but I'm experiencing the error.  Any tips on how to get Adobe Analytics back working on Microsoft Edge?   

Hey all, i use a report that provides a new row for each day that i extract and use to build a report. As the end of the year is coming up, i'm not sure how the report will behave with the time filter i have applied which is the pre-set adobe This Year (excluding today) - On January 1st 2024 will this filter identify its 2024 and exclude today hence providing no data or is the 'excluding today' clause actually a priority and it'll still give me a full 2023 dataset (31-12-2023)  Hope this makes sense and hope someone understands! 

I'm trying to create a segment that I could then use as a filter to only show pages that contain a specific custom link value, for example a segment applied to a freeform which would then display pages with a specific button or link. Open to other ways to go about this as well