Adobe Analytics

Hi,I need to pull up a report in data warehouse which will give me bounce rateI am aware this metric is not available directly and suggested to use Single Access/Entries.However I do not see the metric Entries either in Data WarehousePlease advise

Hi everyone, I have a price dimension. Which , I want to make it in a rand through segment.Like eVar with values between 1000  to 4000.Can anyone tell me, how we can achieve this through segment ?  

When creating a workspace for an Adobe Target Experience, where the experience is set up to run on specific URL's and contains targeted audiences, do I need to also filter for the URL's that the Adobe Target experiment ran upon?Example  Adobe Target A/B Test runs on URLs:  /product1, /product2 and /product3 ONLY.Adobe Target uses URLs defined in the Deploy Page settings. *(called "LP Promotions")In workspace, when I set up the reporting I build a report with the A/B experiences as columns (green in screenshot) and on the left (rows) the elements that are being tracked via the Activity-Map (clicks in this case).  I add Visits (blue in screenshot) for the metric and a URL Segment of URL's for filtering (which matches the LP Promotion URL's that are already defined in the Experience).For example below. If I remove the LP Segment, the count changes slightly. Bottom line question:  If I use segmenting in the Adobe Target Experience, do I need to

Hi everyone,I have segment which is in hit  where site section- xyz.But, whenever I create link click report with link clicked event there is No data values are 0.But, if I am doing the same with segments Visitor container instead of hit container. I am getting values . what could be the reason?Since , I am not passing any page eVar with link click, could that be?But pagename is being passed with link clicks.Also, Can Anyone tell me when to particularly use hit container in segment?Thanks!

I'm currently working on integrating Adobe Launch with Adobe Analytics and encountered a challenge I hope someone can assist with. My goal is to link up Adobe Launch with the development (dev) eVars in Adobe Analytics, but it keeps defaulting to the production (prod) eVars. I have an eVar(103) defined in both my Dev and Prod environments as conversion variables in Analytics Dev eVar(103): OptionProd eVar(103): ReferenceID When I am trying to add the eVar to an action in Rules (dev environment), it behaves as follows (screenshot). This imples that dev environment in Launch is pointing to the prod environment conversion variables in Adobe Analytics.  Here's what I've done so far:Accessed Adobe Launch and selected the property for our dev environment.Added the Adobe Analytics extension and configured it.Attempted to map the eVars in Launch for our development environment, but they still reflect production eVars. I'm not sure if I'm missing a step or if there'

Hi everyone,I need to visualise the report where hour of the day in dimension and visits with 2 date ranges column . Today and day before yesterday..When , I tried line visualisation, the each hours in dimension in visits are showing different line.Can anyone tell me how this can be done?

Hi,I'm trying to open my regular workspaces and this error keeps showing up: 9b7d7b6f-1c19-4e33-bf7e-3e6efe4cba92 Please advise!

We use Adobe Launch and our IT team has mentioned removing s_vi cookie. How can we go about disabling it? Can it be done through Adobe Launch?

Buttons and formsWould it be possible during a next update to give the possibility of enlarging the "buttons and forms" window (as for example for links) so that we can adapt it and allow the reading of 'Long "URL"?Big thanks. Buttons and formsWould it be possible during a next update to give the possibility of enlarging the "buttons and forms" window (as for example for links) so that we can adapt it and allow the reading of 'Long "URL"?Merci bcp. 

Hi, I have a webpage that has multiple pages.Is there a way to exclude the count of unique visitors on the subpages if the browser used a link on the main page to get to the subpage?

Introduction Understanding Data Views is pivotal to getting the most out of your Adobe Experience Platform analytics data. In this guide, we will discuss the basics of Customer Journey Analytics (CJA) data views setup and how they can benefit your company. In a follow-up blog post, "A Guide to Customer Journey Analytics Data View Component & Global Filter Settings”, we will continue building on this foundation. We will explore more advanced topics in further depth, such as configuring data view-level schema to granular components settings and data view-wide global filter settings. With this combined knowledge, you will be well-equipped to harness the full power of your Customer Journey Analytics data to drive your business forward. What are Data Views? A data view is a customized view of your Customer Journey Analytics data. It allows you to filter, compose, and organize your data to gain deeper insights into your company’s data and users. With data views, you can create custom v

Using the Day of Week dimension (OOTB) and Hour of Day dimension (OOTB), you can create a custom heat map to understand what times and days of the week generate the most significant amount of engagement or drive the highest number of conversions. While using the Day of Week (OOTB) and Hour of Day (OOTB) dimensions produces an insightful and granular seasonality analysis, this heat map is not limited to these dimensions. For instance, swapping out the Hour of Day dimension for the AM/PM (OOTB) dimension will produce a high-level, meaningful analysis.    When applying the conditional formatting setting, you can use auto-generated to automatically calculate the upper limit, midpoint, and lower limit based on the data, or you can define your own custom limits.  After selecting and applying the type of conditional formatting for your analysis, your reports will appear similar to the examples shown below:   Heat map to trend engagement         &nbsp

Value of Treemap Visualization Treemaps display hierarchical data as a set of nested rectangles in which the rectangles range in size from top left (largest) to bottom right (smallest). Use cases for Treemap visualizations include: Showing the proportions between each part and the whole. Showing the pattern of the measure distribution across each level of categories in the hierarchy. Showing attributes using size and color coding. Spotting patterns, outliers, most-important contributors, and exceptions. In Adobe Analytics, the smaller boxes may not have text to label the box; you must mouse over them to view the dimension item and the associated details.  When to Use Treemap Visualization While the bar stacked visualization can also show proportions between each part and the whole, similar to the Treemap visualization, these two display values differently. The bar-stacked visualization will visualize the highlighted dimension values in each column and compare the results. For in

  Welcome to the 7th edition of the Adobe Analytics Community Lens!   The Adobe Analytics Community Lens is your community bulletin board highlighting the latest updates from the Adobe Analytics Community in one place.In this edition, we are sharing updates from September to November 2023, including, the most viewed Adobe Analytics content on Experience League, as well as the latest product releases, upcoming and past learning opportunities, and a lot more!   Adobe Analytics Community Lens  📅EVENTS AND OPPORTUNITIES📅 Analytics User Group event: Adobe Analytics EMEA 2023 Q4 get together, December 13 This is a chance for us all to get together for an informal session to celebrate product releases and share our different experiences using Adobe Analytics throughout the year; positive or negative. We'll be breaking out into smaller breakout rooms, so if comfortable, please do come prepared with some thoughts from your own organisation to share. Hope to

Activity Map browser Extension not working properly for months for our team.Is it the same case for you guys?

Can you Please share a suggestion for an Account Based Marketing Platform that can be integrated with Adobe Analytics based on your experience.I would like to gather more information about traffic using these platforms.

                         

When it comes to analytics solutions, Adobe Analytics reigns supreme for a multitude of reasons:1. Unparalleled Data Analysis:Dive deep into your data with Adobe Analytics, boasting an extensive toolkit for comprehensive analysis. Gain profound insights into user behavior, empowering businesses to truly understand their audience.2. Real-Time Insights:Stay ahead of the game with Adobe Analytics' real-time reporting capabilities. Instant access to up-to-the-minute data is invaluable for businesses needing swift, data-driven decision-making.3. Cross-Channel Mastery:Excel in analyzing data across various channels, from websites to mobile apps and digital platforms. Adobe Analytics provides a panoramic view of customer interactions, enabling businesses to optimize their digital strategy seamlessly.4. Precision with Advanced Segmentation:Create highly targeted and customized segments effortlessly. Adobe Analytics offers advanced segmentation tools for precise analysis of specific customer gr

Currently we are using third party scripts to capture page scroll percent levels - 25, 50, 75, 100Is there a built in way/OOTB in Adobe Analytics or Adobe Launch to capture scroll percents on webpages?

Hi everyone,I am getting confused with date ranges for UV and visit and for seperate subsection segment.since , I need to create report for daily, monthly  and last 90 days.->So, Does daily means Today report or just days in dimension for over a month.->Monthly view should be this month (a custom date range filter) or month in dimension .->What should be The date range for the panel and will it affect if the custom date range are  different.Because, I have been doing comparision for visits and UV on the basis of  - this year this month and last year This month.->I have a doubt on this too can you tell me  should I compare last month and 2 months ago data or This month and last year same month. Which one makes more sense.Same goes to day.Can anyone please tell me how should I approach or  how normally you deal with date ranges. Any example would be helpful.. Thanks !

Hey Adobe Community,Long-time lurker, first-time poster to this community.  I've seen similar questions to this one but they didn't quite answer the issue so just sharing some nuances to pinpoint the issue.  We recently added 2 new marketing channels and processing rules to our global suite Marketing Channels, under our admin settings.  After that, unrelated, our "other campaign/unattributed" channel started collecting tracking codes that were not a part of the rule set for that channel.  We've been steadily adding to the ruleset for "other campaign/unattributed" to stop attribution to that channel but we're still  seeing a ton of "unspecified" traffic so that it's our most visited source, according to reporting and I don't think that's right yet.  Other campaigns/unattributed has never been our highest attributed channel.  According to our rule set, unattributed/other campaigns should be last in the processing order, so I'm not sure why there is

On Wednesday, January 17th, 2024 at 10am PST, we will have a livestream event titled:Bringing your Adobe Analytics data and analyses into Customer Journey AnalyticsREGISTER NOW! Details:Join Bryan, Eric, and Doug as they discuss how to quickly get moving with Customer Journey Analytics. You’ll learn about using automated processes to move data and analyses from Adobe Analytics to Customer Journey Analytics, as well as any gotchas to consider during the process.And of course, they’ll have a healthy dose of fun tips and tricks along the way.As always, this live session lets you ask questions in the chat and get answers from the experts.Can't make it? Sign up anyway and we'll send you the recording afterward. We hope to see you there!