Adobe Analytics

I have a fallout report that shows 3 completion in the bottom in course of one week (Visit container).If I look at individual days the total sum is only 1.This leads me to think that sequence can be completed over course of days e.g. visits.But the end result I am after is the customers who completed all the steps within one visit. Is my hypothesis correct and is there a way to get fallout to visualize just those that complete all the steps in one visit?I did some more testing and modified the segment based on Fallout: I changed Then to Then within 1 hour(s) with similar results. So if sequence is restricted to one hour (from step to step) then why I have 1 entry counting daily but 3 when looking at whole week.Why there are more qualifiers when looking the whole week vs. daily

Dear Adobe Analytics Team,I hope this email finds you well. My name is Rushi Bhavin Shah, and I am writing to express my sincere passion and enthusiasm for the field of data analytics, particularly in the context of the Adobe Analytics Competition.Unfortunately, I encountered unforeseen technical difficulties while attempting to register for the competition before the midnight deadline. Despite my best efforts, I was unable to upload my resume on the portal in a timely manner, resulting in my inability to join my team, who have successfully registered.I understand the importance of deadlines, and I genuinely apologize for any inconvenience this may cause. However, I am reaching out to kindly request your understanding and consideration of my situation. As a devoted data enthusiast, I was eagerly looking forward to participating in this competition, and missing out due to a technical glitch is truly disheartening.I assure you that this is a one-time scenario, and I am more than willing

I'm creating a custom calculated metric to better understanding engagement activity based on page visits.  To achieve this, I've set up a custom metric as follows: Engaged user rate = (link click, download, form start, video view) / total visits  Questions: 1. Does this look accurate? Could I be missing anything? 2. How do I set the maximum percent to 100% in the metric builder so I'm not seeing these 100%+ figures at the aggregate level? (I set the upper % limit in conditional values to 100% and the lower limit to 0%) - what am I overlooking?    

Hi , I am seeing around 10,000 visits with referrer called https://s0.2mdn.net/ . Can anyone help me with  what is this domain name ? and how its attributing to referrer dimension? Thanks in Advance , Pradeep

Hi,  I have created a segment to only show me asset tracking codes if it hits on specific asset tracking codes and nothing else. However, I realized when I tried to dig deeper by dragging asset tracking code dimension under my segment, some of the data is showing "SEO" which is out of the norm and against the rules of my segment.  Does anyone has any explanation on this anomaly? Thank you.

Hi, Maybe something obvious but I'm fairly new to Adobe Analytics. I'm facing the following issue with segment sharing: For a project, we have set-up a global reporting suite that measures all "national" sites for a brand.For each national site, we have created a virtual reporting suites for users of each national entity.Local users do not have access to the global reporting suite..As a central team, we would like to create general segments that local users can also apply at their own level (e.g. users who viewed product A, users who completed a lead form).If I create a segment based on the global reporting suite (as a source) and then share it with the local users - they can't use it. They will get an error message because the segment is linked to global reporting suite while users only have access to their "local" virtual reporting suite. It seems not possible to switch source (like for project templates)So my question is how to achieve that? I.e. being able to cr

Hello,  We built a freeform table with the following elements:  Page URL (v12) as a dimension.Video Impressions (event 12) as a metric.  We discovered that a page had video impressions while there is no video embedded within the page. When we changed the original dimension on the table for Page URL (v12), to Page URL (p12) or Page, the video impression goes away.  Does someone have any ideas why that? We would like to keep the Page URL (v12) as a dimension.  Thanks in advance! 

Hi, We have implemented the Payment method using Adobe launch and it's capturing the payment methods like visa, master... and unspecified. When we drill down the analytics, under Unspecified there are transaction ID captured and we checked the payment gateway, the ID is mapped to visa/master etc. Question:1) shouldn't be the payment method be captured correctly since transaction ID is captured? All the payment methods are captured based on the payment gateway setup.2) is this got to do with Cookies disabled ? or privacy login ?3) how can I resolve the unspecified issue? AA example :Payment method                     Revenue1)Visa                                        300    t123                                     

Hi Team, I am new to Adobe Analytics , I want to know where can I start my learning journey and also how can I do practice in my laptop... Thanks for your help in Advance. 

Bonjour,  Depuis plusieurs jours, nous n'arrivons plus à paramétrer de nouveaux envois de fichier via FTP? Avez-vous également ce problème ? Merci.

Hello, Community! Today, I have a question regarding an event I've observed on my network. It appears to be triggering, but when I check Adobe Analytics, I can't find any record of this event. Strangely, I do see other events that are part of the same rule, and they are being counted correctly. What's even more perplexing is that sometimes I can spot the event, but it only registers when it's sent from a smartphone is for that, that we can also see 16 but not the 10000 visits that we normally have. For your reference, there aren't any processing rules set up in the report suite, so I'm unsure why I'm receiving data for this event but not seeing it reflected in Adobe Analytics. Thank very much for your help!

Recently, we transitioned our team's Power BI dashboards from SharePoint to Adobe Connector 2.0. This all worked fine, except when we uploaded the desktop Pbix files to the web service version of Power BI. After uploading when I refreshed the dataset, it took a ton of time 10+ hours but at the end, it kept throwing the following data source error:Data source error: [ValidateMarkupTags][ccon]Expression.Error: The field '[ccon]rows[/ccon]' of the record wasn't found.. error_code = [ccon]429050[/ccon]. message = [ccon]Too many requests[/ccon]. [/ccon]. The exception was raised by the IDataReader interface. Please review the error message and provider documentation for further information and corrective action. Table: 2023 - Export 2 - BID specific Post-Click.Cluster URI: WABI-US-NORTH-CENTRAL-E-PRIMARY-redirect.analysis.windows.netActivity ID: 20486221-9bdd-4cee-b186-1d9fae60fca9Request ID: a43dd13d-98c7-a3f5-ad59-9a7783960676Time: 2023-10-13 11:29:36Z Any ideas on how to fix this er

Hi, can anyone share if they've been able to pass and set a s.prop in the adobe analytics and decibel insight integration.  At the moment it appears only an eVar can be set which would normally occupy the users decibel Insight ID.User case here we need to set a brand value on every hit we send to Adobe.

Hey there, If anyone has faced the same issue and can help, it will be highly appreciated!!!!  Story:The data in the Page URL QSP for campaign code is captured in an eVarThere are more public sites and Single Page Applications (authenticated) that utilizes the variable to collect data for the Campaign names and pulls it into Adobe Analytics. The last time I ran a test campaign on a SPA (September 5), all the data was populating including my user journeys and clicks on the pages ( when I came in through the campaign code say "xyz". ) Today, when I try to login again through the Query String Parameter that captures the campaign code, it is not populating anything, it shows % "eVar name" %. Based on my knowledge, no changes were made on Adobe. All the other unauthenticated sites are still pulling in the parameters passed through the campaign string..  If there is a workaround to capture the missing campaign id string, please help!! Thanks 

An event we set up that fires upon user login does not fire anymore for iOS (starting August 2023). The rule we have firing the event was not updated since 2021. We have also ruled out any internal issue by looking at AA & Launch, and seeing that there were no related updates during the time the drop started. We have also confirmed that the event still fires in Android and in Windows. Any kind of enlightenment about this would be appreciated. Are there any recent update that Apple has made that is interfering with specific data collection e.g. events? I am kind of stuck on the issue now since it happened suddenly and without any changes on our end. Thank you in advance.

We have been using tracking code + a referrer to classify traffic from advertising.  However, i know this is flawed particularly if a browser is blocking this.  However, the point was to avoid tracking this traffic if it was a bookmarked.  Someone could easily click on a banner ad, arrive on our site, and bookmark it, returning again and again. I'm looking for a better way to classify this traffic without using referrer. Does anyone have any better ideas?

I am updating an existing implementation that uses a colon delimiter. One of the fields we have is a text field which captures the texts of various items some of which are article names. The issue is some article titles have a colon which is throwing off the existing rule. Here is the expression I am using. (?i)^(.*?):(.*):(.*):(.*)(?-i)  What I am trying to achieve is the following: $0Trending Articles 123:Link:Emerging Issues Executive Quarterly: Insurance in the Inflationary Era:Undefined To be: (note the colon on $3) $1Trending Articles 123$2Link:$3Emerging Issues Executive Quarterly: Insurance in the Inflationary Era$4Undefined  It is currently returning: $0Trending Articles 123:Link:Emerging Issues Executive Quarterly: Insurance in the Inflationary Era:$1Trending Articles 123$2Link:Emerging Issues Executive Quarterly$3 Insurance in the Inflationary Era$4 any help to modify the regular expression is welcome - (?i)^(.

I'm having problems using a 3rd party integration (Funnel.io) to make API requests which include calculated metrics with a non-default attribution model. Because the platform includes the Day dimension in API report requests by default, it ends up under-counting my metrics which use a First Touch, 30 Day attribution model. I can see the same behaviour in workspace. If I use these metrics against the Day dimension for 6th Feb, I end up counting only the conversions where both the conversion was on 6th Feb and the first touch (in the 30 day window) was also on 6th Feb. Which is obviously not what I want to do. I am trying in parallel to ask Funnel whether they can update how they make API requests. But at the same time, an easier solution would be enabling the option to disable Attribution IQ for date dimensions. Alternatively, if anyone else has experienced this issue and can think of an alternate workaround then I'm open to any suggestions. Panel has a date ran

Hi I am creating a segment that visitors visited the website within 30 days with no purchase history. When I set the conditioncase1- no orders in visitor level- day since last visit less than 30 in visit or hit levelthen it shows the correct days including only 30 days   but when I set it like two cases below- case 2: whole containers in visitor level or - case 3: day since last visit less than 30 in visitor levelthey shows over 30 days like 643 days  case2: whole containers in visitor level case3: day since last visit less than 30 in visitor level I am getting confused with visitor containers. as far as I understand, case1 is that I want to see "day since last visit (how many days past between current visit and last visit)" amongst hit traffic having conditions below- visit exists- day since last visit is less than 30 days- orders never generated case2 is that I want to see "day since last visit (how many days past

Im starting out as a data analyst, switching from SEO to analyst i have a grip in analytics, websites, python and understanding of how data works but hasnt practiced anything, Any advice for me how i can start, resources, steps, or help how can i start and excel? Looking forward to experienced data analysts advice... Much appriciated community!

Version 1.9.3 of the Adobe Analytics extension for Adobe Experience Platform Data Collection was released over a week ago, but there are no corresponding Release Notes at https://experienceleague.adobe.com/docs/experience-platform/tags/extensions/client/analytics/release... - anyone know where I can find them? This is a repeat of the issue I reported at https://experienceleaguecommunities.adobe.com/t5/adobe-analytics-questions/adobe-analytics-extension-1-9-2-release-notes-missing/m-p/608691/highlight/true#M44939 where the extension is being released with no release notes.

I knew that Adobe had introduced a different configuration setup to get the reports from the Adobe Data warehouse. Currently, I am using S3 to get the reports. I am struggling with configuring the scheduler options to schedule my report on a daily basis. I don't understand the time to choose to schedule. Facing an error as below.Could someone help me to fix this?

Currently the Adobe Analytics data from my live webpage is sent to the dev report suite. I have the prod Report Suite configured in Adobe Analytics and Data Collection. How can I make the data from my live webpage be sent to the prod report suite?

Hi, is it possible to create a calculated metric for the weekly change of a metric like this?I'm interested in using something like this to analyze statistically significant swings in page views for my team's servers, but can't figure out how to make something that would apply uniquely to each week in a date range instead of across two specifically defined weeks.

Looking for advise on how to understand travel search demand.We are currently tracking search start date in one evar and search end date in another evar. We are planning to add another evar to capture search window in weeks (difference between the start and end date).We will end up with evar X values 9-15weeks, 1-5weeks etc or evar X values 1,2,3,4 /  9,10,11 etc. What is the best approach that will allow to see demand for destinations by week number. Thanks, Julia