Adobe Experience Manager

Hi all, Kindly point me a to a tutorial for each of a simple Content Fragment and an Experience Fragment (with just two fields, say name and address)Creation of Content/Experience Fragment Model Creation of Content/Experience Fragment from it and populating the fields with values. Process of Exposing it via GraphQL API Any Sling Model required ? If so its Code. Usage in AEM Front End (Sighly) with code.. I want to follow along this tutorial along and see this working. A similar tutorial for Experience Fragment also will help. Appreciate all your responses. Thanks,RK.

Hi all, Kindly walk me through a case study of AEM - SFDC Integration using CIF.Please involve1.Typical High level requirements2.Prerequisites3.High level steps to accomplish it.       Configurations       Customizations       Testing4.Any tutorials for me to follow and replicate this integration. I will follow hyper links to go deep on any of these steps. Appreciate all your replies. Thanks,RK.

I have a repeatable panel in an Adaptive form built on core components, with a remove button inside the panel and an add button outside. When I use the rule editor to configure the remove button to delete a panel instance, it consistently removes the panel below the one I selected. For example, if I add three panels and try to delete panel 2, panel 3 gets deleted instead. While this could have been resolved using the Code editor, that option isn't available to me. My constraints are that we're working within a headless delivery model, so I can't use guidebridge, and custom JS functions aren't feasible because they would require passing the SOM expression, making the JS form-specific. Given these limitations, I would appreciate any suggestions on how to address this issue. 

hi,I am trying to create an adaptive form using form template (xdp) (foundation components) on aem 6.5.The issue is after creating adaptive form using xdp, the data source is not populating  Even though an XDP is referenced in this form, it shows blank and the error.log as following errors:19.03.2026 13:56:52.576 *ERROR* [10.238.22.152 [1773924978316] GET /content/forms/af/FOFO/adaptive-forms/A123-abc/jcr:content/guideContainer.xfajson HTTP/1.1] com.adobe.aemds.guide.xfa.XFAJSONTransformer Error in transforming xfa json:nulljava.lang.NullPointerException: null19.03.2026 13:56:52.577 *ERROR* [10.238.22.152 [1773924978316] GET /content/forms/af/FOFO/adaptive-forms/A123-abc/jcr:content/guideContainer.xfajson HTTP/1.1] com.adobe.aemds.guide.service.impl.GuideModelImporterImpl Error in importing Xfa Jsoncom.adobe.aemds.guide.service.GuideException: null at com.adobe.aemds.guide.xfa.XFAJSONTransformer.transform(XFAJSONTransformer.java:104) [com.adobe.aemds.guide.aemds-guide-core:6.0.688] at

I just purchased Adobe Dream Weaver, after having not had the Creative Cloud for about a year.When I attempt to activate it by clicking the Dream Weaver I get a message that I can’t activate it because mfc140u.dll was not found. How do I solve this dilemma? Thank you in advance for your help with this. 

Hey All,Need your expert opinion on an Adobe Target + AEM Cloud setup.Currently, our AEM homepage is built using a single layout container (all components inside it). Because of this, Target (VEC) sees it as one DOM block, making it difficult to: 1. Reorder components 2. Inject experience fragments 3. Run personalisation without custom JS We are considering a few approaches - 1. mBox container for injection 2. Custom JS to reorder components 3. Nested layout containers (split page into sections) 4. Converting sections/components into Experience FragmentsAdditionally, we have three different user types, where the homepage content varies based on the user. One approach I am considering is to create user-specific content as Experience Fragments, export them to Target, and let Target handle the personalisation. On the AEM side, I would provide designated containers on the homepage where Target can inject the relevant content.From an Adobe best practices perspective, what would you recommen

Hi Everyone,  We had a 3rd party DAM system which was tied to our dialog by a custom sling:resourceType “/apps/custom-connector/core/ui/components/content/custom-pathfield”This is now being replaced with “cq/gui/components/authoring/dialog/fileupload” modeled on Image V3 component to allow Remote Asset Picker feature on the dialog.Previously if we had a field say “heroImage” which hosted the old URL “https://media-www.abc.com/test.png” This is now replaced by having a fileReference field “heroImagefileReference” which hosts the delivery API URL when an author selects the image from remote DAM instance such as “/urn:aaid:aem:000a885c-3807-4fbb-9a2f-9a6ae3120ccf/58fb9408-test.png”The image renders well on both authoring dialog, editor.html view and even published page.We also have written the sling model such that if no value is present in “fileReference” then we read the value in original “heroImage” to continue rendering the image. This works fine on view mode but in the authoring dial

I’m exploring to start using Image Templates to generate composed Images with embedded text.Now that we are defining Template details, I would like to save the templates in our code repository so it can be versioned, replicated through different environments and protected from unwanted access or modifications. I looked through documentation but didn’t found explicitly where can these templates be stored and at the same time, be available to be used.  Do you know if this templates can be saved in ui.apps, ui.config or ui.content modules and if there is any specific path allowed?I asked chatgpt and mentioned that it cna be under ui.apps directly below ui.apps as: /apps/your-project-name/dynamic-media-templates/ But I would like to know if anyone has already done this before. Thank you in advance for your help :) Luis Moreno

If you build content-heavy AEM sites, you know the pain: designers live in Figma, content authors live in AEM, and someone is stuck manually copying text and assets between the two. This article walks through an n8n workflow that automates that pipeline end‑to‑end: from Figma designs to AEM Content Fragments, complete with uploaded assets and AI‑generated SEO tags.I built an n8n workflow that automates this pipeline end-to-end — from Figma designs straight into AEM Content Fragments, with DAM asset uploads and AI-generated SEO tags handled automatically. Check out full article here: https://medium.com/@vorajineet/building-an-ai-driven-pipeline-figma-designs-aem-content-fragments-with-n8n-4a0a67eb06b2 

We’re excited to announce the early access launch of our all-new Dynamic Media Video Player – a faster, smarter, and more accessible upgrade to our existing player. Reimagined from the ground up, this next-gen player is built to deliver a premium viewing experience while giving your brand the performance edge it deserves.We’re inviting select customers to join our VIP Early Access Program! What’s New?Blazing Fast PerformanceOur new lightweight player drastically reduces load times, keeping your site snappy and responsive – no matter the connection speed. We have noticed almost 20% reduction in load time and 55-65% reduction in LCP.  .                             Savings of 70% bytes served for player images and 40% for player JS Adaptive Streaming for Seamless PlaybackComes with full adaptive bitrate streaming support through which the player dynamically adjusts video quality based on the viewer’s bandwidth and device capabilities. That means smoother playback, fewer interruptions, and

I’m trying to do a redirect based on the email domain that they submitted, basically want to redirect them to page A if their non-customer domains, page B if their customer domains. As i know currenly there is no native functionality to cross check the domain to marketo lists correct? Or is there an alternative for this

Hi Team,We are migrating all our assets to a separate AEM Cloud instance from a 3rd party DAM.Our sites instance is setup in another program while the assets is on a different program, We want to use our current components such that they are able to pull and render the assets remotely.Following https://experienceleague.adobe.com/en/docs/experience-manager-cloud-service/content/assets/dynamicmedia/dynamic-media-open-apis/integrate-remote-approved-assets-with-sites# we are able to leverage image v3 component to fetch assets remotely.However in our custom component we were not able to do so. The previous DAM image URLs were represented in these custom components as simple textfields.We modified and added the below properties - Changing sling:resourceType from textfield to fileuploadsling:resourceType="cq/gui/components/authoring/dialog/fileupload"enableNextGenDynamicMedia="{Boolean}true"fileReferenceParameter="./fileReference"fileNameParameter="./fileName"On adding these values we are abl

Hi,I am working on an AEM servlet/workflow that needs to bulk move assets using the Asset Manager Granite API. Key Requirement:The solution must reliably handle the movement of 300–500 assets in a single execution without errors such as repository exceptions, session timeouts, or failed moves. Performance and stability during high‑volume moves are crucial.I am looking for guidance on the following points: Feasibility Is it supported and recommended to move 300–500 assets at a time using the Granite Asset Manager API via a servlet? Are there any known limits, pitfalls, or configuration considerations when moving assets at this scale? Best Practices / Algorithm What is the recommended approach or algorithm for bulk asset movement to avoid errors? Should assets be moved in batches, and if so, what batch size is considered safe? Are there recommendations around session handling, save frequency, or throttling to ensure stability? Destination Path Validation Before moving assets, the

We have a legal/compliance requirement to store all our iterations/versions of our documents. In addition to retaining them for an indefinite period, we need to be able to view the various iterations/versions & markups (created via Adobe Acrobat) that have been created during the document creation & approval process of the document. I loaded a couple iterations of a document that had 7 iterations/versions created in another content management tool (again, markups created via Adobe Acrobat) and tried to access the prior iterations in the timeline preview but do not see the markups in the preview. I double-clicked on the current document and do see there are markups, but you can’t select them or hover over them to see the actual markups. We need an easy way to view all iterations/versions of a document and be able to see the markups made from version to version. 

We have recently started using Fragments in our Adaptive forms. I noticed that when I create a new fragment, the jcr property (fd:version) defaults to 1.1. However, fragments from the Core form component examples project are set to 2.1. What controls this version assignment? creating a fragment with 1.1 version does show it under /assets. Additionally, after creating a fragment, the components available are all sourced from fd/af/components/. How can I configure this to point to my project instead? I also do not see a template being selected during fragment creation, so I’m unsure how the allowed components are determined.Thanks,Abhishek

We’re excited to celebrate Arun Patidar ( ​@arunpatidar ), who has been named the 2025 Community Member of the Year for the Adobe Experience Manager community!   Arun is a big reason why the AEM community is such a helpful and welcoming place. Through his consistent participation, thoughtful responses, and deep product knowledge, he has supported countless community members as they work through challenges and get more value from Adobe Experience Manager.  Whether he’s answering tough technical questions, sharing practical tips, or helping move conversations forward, Arun always shows up with generosity and care. His contributions make a real difference and help strengthen the collective knowledge of the AEM community. The Community Member of the Year recognition celebrates individuals who go above and beyond to support others, and Arun truly embodies that spirit. Please join us in congratulating Arun by sharing your appreciation in the comments below. We’re grateful for everything he d

I'm using 6.5.21 and trying to call the google maps api from backend. As part of it, I have added the below dependency. in my core pom.xml  <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-dependency-plugin</artifactId> <executions> <execution> <id>copy-google-maps-runtime</id> <phase>generate-resources</phase> <goals> <goal>copy-dependencies</goal> </goals> <configuration> <includeScope>runtime</includeScope> <includeGroupIds> com.google.maps,com.google.code.gson,com.squareup.okhttp3,com.squareup.okio </includeGroupIds>

TLDR: I'm trying to investigate query param caching (example: /archive.html?page=xxx&year=yyyy) in my local dispatcher and I'm not sure how to test for it.-----------1.  If I visit https://www.myhost.com/content/myapp/sg/en/faq.html, I'm pretty sure an HTML file is created in the dispatcher filesystem (maybe in /var/www/html).If I visit http://localhost:8080/content/myapp/sg/en/faq.html, where can I find the HTML file for this page?I tried this command (after running docker exec) but it only found the default Apache HTTPD index.html. Any ideas? Thanks54177f4f6b8b:/# find / -iname "*.html" -type f 2>/dev/null /var/www/localhost/htdocs/index.html--------2. I am trying to test Cache-Control but no matter what value I set, it seems the value is always the same. ("public,max-age=60,s-maxage=300,stale-while-revalidate=86400,stale-if-error=86400")As a test I tried thisHeader set Cache-Control max-age=0Is this normal behavior?------EDIT1: I tried both docker_run_hot_

I am trying to edit the image by utilizing the masking and the original source image. While using the Firefly image fill APIs, I encountered a problem indicating that Firefly is unable to read or process the images.I have already experimented with various images, including those created by Firefly itself, but the issue persists.Has anyone else faced a similar challenge?Please advise me on what I might be overlooking !Attached is a screenshot of the Postman collection and the error encountered.  Thanks in Advance !

Hi everyone,We are migrating our Azure AD B2C login systems, which are currently using SAML, to the OpenID Connect (OIDC) protocol. We came across this documentation: https://experienceleague.adobe.com/en/docs/experience-manager-cloud-service/content/security/open-id-connect-support-for-aem-as-a-cloud-service-on-publish-tier?utm_source=chatgpt.comand we are using it for our implementation.The problem is that we are getting the following error:Caused by: com.nimbusds.oauth2.sdk.GeneralException: The returned issuer doesn't match the expected: https://apexbrasilb2cdev.b2clogin.com/[my_tenant_id]/even though we are setting the baseUrl correctly, as shown in the document:"baseUrl": "https://apexbrasilb2cdev.b2clogin.com/[my_tenant_id]/[my_custom_policy]"And the well-known configuration is located at:https://apexbrasilb2cdev.b2clogin.com/[my_tenant_id]/[my_custom_policy]/v2.0/.well-known/openid-configurationInside the .well-known file, the issuer is defined as:"issuer": "https://apexbrasilb

Just more of a question to other AEM users. Have you ever experienced delays when trying to publish multiple pages?We’ve noticed in our environment when we select 20 or more pages to publish in one go that only one or 2 publish and we have republish the remaining pages again.Any suggestions on where we could look to optimize the queue or any tips or tricks that you can suggest?

Hello Adobe Team, currently modern image formats are not fully supported end-2-end.In the CF EditorAVIF = Asset reference can be selected, NO preview image shown to authors. The delivey through Dynamic Media with OpenAPI is workingJPG XL = Asset reference can be selected, NO preview image shown to Authors. The delivery through Dynamic Media with OpenAPI is NOT able to render it. Thanks,Tim