Adobe Workfront Fusion

Hi everyone, There is a project with several tasks. When specific task is complete it sends email notification to the person Assigned to another task. Is possible to implement the following:Can the person who receives the email mark their task as Complete within the email itself and not have to go into the Workfront project to mark it as Complete. Is it possible? If so, how to implement this? Could you please advise?

I have an issue report and am trying to calculate a percentage for the total.. in this case 198,464 / 1111266 (these numbers are pulling as an $ value aggregation in a grouping.. I want to do the same thing with a percentage. I just want the actual calculation which in this case is 198,464/1,111,266 Anyone have any ideas?? The answer I'm getting is 169%, but the answer I am trying to get is 18% (17.8 rounded up).All the issue percentages are pulling correctly, but I can't get the aggregation to calculate.  Code I'm using is: aggregator.displayformat=doubleAsPercentRoundedaggregator.function=SUMaggregator.namekey=CP % Calculatedaggregator.valueexpression=ROUND(DIV({DE:Customer Profit},{DE:Net Sales})*100,2)aggregator.valuefield=ROUND(DIV({DE:Customer Profit},{DE:Net Sales})*100,2)aggregator.valueformat=customNumberAsPercentRoundedStringdisplayname=CP % Calctextmode=truevalueexpression=ROUND(DIV({DE:Customer Profit},{DE:Net Sales})*100,2)valueformat=customNumberAsPerc

Can anyone provide a screen shot or example on how to do a 'Not In' or 'In' search operator?I'm getting errors when testing this (or it just doesn't work).  The API Basics page doesn't discuss this.Thanks in advance!

Seeking best-practice recommendations, considering the Principle of Least Privilege, for Fusion developer access in Workfront. Is the built-in Planner access level enough for a Fusion developer to effectively design a Fusion automation, including testing in lower environments? Or do Fusion developers require System Admin access to all Workfront environments? Any insights, pros, cons, etc.would be greatly appreciated.  

What is the benefit of connecting Fusion to MS apps (sharepoint, onedrive) using a Microsoft Account versus a Client ID & Secret? I believe the MS User Account could be used across all apps while the Client ID & Secret route would need to be setup for each app. Is that correct?

Hi Community,Please I need help to create a report to identify or pull resources who are not logging their time to assigned tasks in Workfront. Any input would deeply appreciated. ThanksMesh 

Hi everyone! I work with the Customer Enablement team here at Adobe, and we’ve got some pretty big news. New and improved Workfront Fusion training is now available on Workfront One! The Workfront Fusion Learning Program is made up of 10 learning paths with hands-on activities, walkthroughs, and over 50 videos that cover topics like integration designs, error handling, and testing. Find the program in the Learning Program section of the Training home page. But wait, there’s more! In addition to the on-demand training, we are proud to announce the addition of a 3-day Workfront Fusion Essentials boot camp and certification. For more information regarding the boot camp agenda, schedule, and frequently asked questions, please visit the Boot Camp and Certification page on Workfront One. Or, if you are just teeming with excitement and are ready to register, head to the Workfront One Events page. Hope you will take advantage of these great offerings!

We have an automation that logs to a specific field in Workfront. There are a number of paths in the scenario and a number of modules that link to this field. I'm looking into upgrading to a rich-text field instead (allowing more characters) and so I'll need to update all those modules to the new field. Is there a way to easily find all the modules that utilize it, or do I need to go through module by module?Thank you!

Hi Fusion community, I have an exported time off file from our HR system, and I want to import these as new Time Off records in Workfront.I'm just doing some basic testing right now, with userID, startDate, and endDate, but I'm running into an error.I'm not developer, but like to try things out.  I created a Fusion scenario that downloads a document, then parses that CSV, and then I'm using an API call - POST - to try and create the Time Off records in Workfront. Here's what my API module looks like:  And here's the error I'm getting: Does anyone know where I'm going wrong?Thanks!Nick

Does anyone know how to filter a listener for document versions in Fusion?If I try to get the project information such as document:project:categoryID I get the error:Function 'getWatchQS' finished with error! fields is not iterableSo I'm having to watch ALL document versions in the system which seems bad. Any ideas? Rob

When I've used a router in Workfront Fusion, I often want to converge paths to run some common modules. Does anyone know a way how to do this? or something similar? At the moment, I've put that section in separate scenario and called it via a WebHook. However, it seems like a really common thing to do an I'm surprise you can't make 2 modules merge paths somehow...? Any help appreciated. Rob

Hey community I need your help.I want to search for tasks which Planned Start Time is earlier than 9:00 not considering the date at all. So basically all tasks which starts before 9:00 AMAny ideas how i can set up a filter for this? Thanks a lot.  

I have two needs that would require pushing a text delimited file or csv file from Workfront to a local or network location. Has anyone built a scenario for this?

Hi allIs there any way that we can read Document using Fusion? Essentially, I want to search for Keywords in Document .

Hi all, really new to Fusion and my first assignment is to create a scenario where if a document fitting a specific criteria is uploaded to Workfront, the scenario picks it up and converts it to a proof. Great. I figured that out. What I can't figure out is how to pull that proof back into Workfront! Has anyone done this before that can point me in the right direction? I can't find anything in the Community that references uploading a proof from Workfront Proof into Workfront.

Hi all - new to Fusion and would like to connect to our Sandbox to do some experimentation and I'm already stuck. I've tried entering in http://ourdomain.sb01.workfront.com, which I'm able to Verify, but when I try to save the scenario, I get an error message: Account doesn't exist: Connection not found 'workfront-workfront:54230'.  Any thoughts?

Hi,I am trying to set up a scenario to notify the requester to submit the required document if the document has not been submitted after 7days. So, once the issue has been submitted by the requester, the status of the Issue will be New and when the resolver reviews the issue and found no supporting documents, the issue status is updated to pending inputs and if the resolver does not receive the document even after 7days, i want the fusion to send notification to the requester after 7days from the date of issue update dateCan someone help me on steps to set up this scenario, esp the issue update date. Thanks & Regards,Vaishnavi

Hi,I want to make some proof Custom APIs call deleteTemplateStages() - api (proofhq.com).For this a module in fusion present for proof custom API.But they have not mentioned any where in what formate we should pass the body xml.Can you please help me what formate I should pass here. thanks

My company just got Fusion a little while ago. I have a weekly extract in excel that has all the employees within my company and their department names. I am wanting to take that weekly excel file and have Fusion update the resource pools and teams within Workfront. Is that possible?

I am reaching out to inquire about the availability of an API that allows us to extract user names along with their respective roles for projects in our Workfront environment. I got one API https://*.my.workfront.com/attask/api/v15.0/user/search?fields=*,parameterValues:* but in that JobRole:Name is not showing in the response dataWe are specifically interested in obtaining a dataset that looks like the following:-Role                                        NamesSr Front End DeveloperMitchell Cook Smith Rogers Willaims MorrisPrincipal Project ManagerAlex Turner Steve Parker David Cruz or like this:-Role NamesSr Front End DeveloperMitchell CookSr Front End DeveloperSmith RogersSr Front End DeveloperWillaims MorrisPrincipal Project ManagerAlex TurnerPrincipal Project ManagerSteve ParkerPrincipal Project ManagerDavid CruzCould you please provide information on

Is it possible for Fusion to create shortcuts to folders on Google Drive? I use Fusion to create folders on Google Drive but would like to create shortcuts of these existing folders elsewhere on our drive. This would replicate the manual action of clicking Organize menu item "Add shortcut".

I want to conditionally map the name listed in the SFDC Opportunity field to with that person's WF user Id in the Entered By ID field on an Issue. If the name doesn't map, I want to map my WF user ID to the field. I'm using the formula below where SFDC_FieldName__c is the SFDC field, PERSON'S NAME is the contents of that field. The problem is that my name being mapped in all cases. What have I missed in the formula?  if(SFDC_FieldName__c + "=PERSON'S NAME"; "60b78449000acce2307bf586e6a18d87"; "5a1301b900276ac1ca15e9aedb3b1bd1")

I was working in Fusion earlier today (as one does) and I saw a new green Workfront lion. It was for "Adobe WF Dev."  I was intrigued post supper and attempted to create a connection...and was unable to. I then attempted to click the "online help" link and got this:  I don't recall seeing this until today and I'm in the tool daily. I checked the Fusion release activity and saw nothing. Did this come through today? And, if so, what does this point to? I can't help but be curious. -j (curious)

Hi,    I am creating a request queue with topic group and queue topics. I want to know how Fusion update queue topics?   These topics are saved in a database table, yes they are dynamic (add/update or be removed). we need use Fusion to connect the database and fetch the latest topics and sync back to Queue topics.   How should I implement this scenario in Fusion?   Thanks.