Adobe Workfront

I'm hoping someone can help me troubleshoot this issue:I've created an assignment report and added two custom fields (attached): one is a Single Select dropdown, and the other is a Text field. However, both fields appear static-I'm unable to type in the Text field or select an option from the dropdown.These custom fields are also included in a custom form linked to each task. I'm unsure if this type of custom field is fully supported within assignment reports.Any insights or guidance would be greatly appreciated! Custom Field #1 - Textvaluefield=task:Creative Ops Notes querysort=DE:task:Creative Ops Notes valueformat=customDataLabelsAsString linkedname=task namekey=view.relatedcolumn namekeyargkey.0=task namekeyargkey.1=Creative Ops NotesCustom field #2 - Single select dropdownvaluefield=task:Progress Status-Task querysort=DE:task:Progress Status-Task valueformat=customDataLabelsAsString linkedname=task namekey=view.relatedcolumn namekeyargkey.0=task namekeyargkey.1=Progress Statu

I am trying to use the new OAUTH 2 config in Workfront Setup to create an Application to use for the Fusion Connection Service Account (i.e. not tied to a user account).Using the key and secret, no problem. When I try to establish the connection I keep getting the following error, https://app.workfrontfusion.com/oauth/cb/workfront-workfront is not allowedMy guess. it is in the OAUTH setup on the Workfront side, but not sure.   Any ideas?

Did you find this Q4 update useful? Honestly, if we can't add custom columns, this feature doesn't really add much value, it just ends up confusing non-admin users. Columns toggle on/off was enough for native fields.and just curious, why is it called 'All Requests', wouldn't 'All Columns' make more sense? Am I missing something?

https://experienceleague.adobe.com/en/docs/workfront/using/product-announcements/product-releases/release-25-q4/25-q4-release-overview#document-and-proofing-enhancements   For those who were not aware, there will be a phased rollout of Unified Approvals to all customers over the next six months. (There has been an opt-in opportunity over the past year, so I know some of you have already adopted.)   For those who have not yet adopted, my understanding is that Unified Approvals and Document Approvals are two different objects. The reports that you create for document approvals will not cease working immediately upon transition because for a while, you'll have two different types of document approvals in the system -- your new unified ones and your old doc approval ones. However, you will notice that new approvals will not show up on these reports.   With that in mind, I'd like to open up a discussion space below. (I'll move it into the discussion area on Monday, just that

I thought this would work similar to retrieving Custom Fields in a Project, but its still only pulling in the basic fields. GEThttps:// <MyDomain>.my.workfront.com/attask/api/v15.0/user/5edb22c5022aac5751a37c4d0acfc53f/fields=parameterValues Any help is greatly appreciated. 

Hi Community, Please can someone point me to the right documentation or information on how to create Milestone in a project in Workfront?Your input is super appreciated. Thanks Mesh. 

Hey y'all I'm posing a question to the Community to help the plethora of newcomers I've met at recent Scale & WUG events lately: During your Workfront journey, what is the one thing you discovered that gave you an a-ha moment? 🤩   I've had a few in the past decade and will add mine to the comments below but I'm hoping we can make a this of gems for others to explore and discover earlier in their journey. This could be something really simple like an basic feature (boards view in a project) you didn't know about, or something truly advanced like collection reporting.

Hi All,when I create / update a Workfront record via the WF API, I am expected to set the values of custom fields. I wonder what is the best practice method for populating drop-down custom fields.I know that I can populate the field by providing the "value" of the custom field option, for example:{ "DE:.Region": "Global" }But then, if the value of the parameter option should change in the future, my integration would fail.Is it possible somehow to populate the custom field by providing the ID of the desired Parameter option (instead its value) to the API?Thank you,Tibor 

Hello Community,I’m trying to create an issue under a specific task (see image below). However, the issue always gets created directly under the project instead of the task, resulting in a structure like:Project >> Issue Nameinstead ofProject >> Task >> Issue NameI can move it afterward using Misc Action >> moveToTask, but I’d like to know if there’s a way to create it under the task directly in one step. Any guidance would be appreciated!

When attempting to create a workfront to sharepoint connection I am getting an error that refers to a reply address but it's unclear where this information should be setup.  I'm assuming it's in sharepoint but am unable to locate this setting. Connection - Client ID, Secret and Tenant ID entered and continue select Error ReceivedAny ideas where to start?

I built an approval workflow for issues, but am struggling to report on it. I don't want an issue status report, just a record of pending/in review/approved/rejected approval status that is not the issue status. I'm testing out the canvas dashboards but can't figure it out. The process we've built does not include converting to a project and ideally we would not want to create custom group level statuses. I've considered building a custom form calculation to pull the approval status only, but not sure where to start with that either. We can do fusion but are under a time crunch so any ideas would be helpful!

HelloWe just switched to the new approvals and we have a ton of external users - am I seeing this right, that if they are Approvers, no proofing tool but they get the approval buttons.  If they are Reviewers then they get access to the proofing tool. Huh??? Why no proofing tool for approvers?!?!Help! I can't seem to find any documentation.

Hi! I'll be attending Max in LA later this month. Will anyone else be there? Summit used to do Workfront Breakfasts, and curious if Max may do anything similar? Would love to network with as many of you as possible!! 

Has anyone been able to access Canvas dashboards from Sandbox? Would love to test it before going to prod. 

Hello, Sorry that this question is very basic, but I've been in and out of so many coding languages lately that I need to ask.Can I webhook repsonse return an array?I have a test scenario where I'm creating an array but when I send that array in a webhook response, it looks like it gets flattened into a data string separated by commas.Makes me think a webhook response doesn't respect data types? thanks,Kelly

Hello, I would like to find a way to send out email reminders to update their project to designated groups, preferably one to me/my team and the one person/team that is currently assigned and working on the project. I would like to have this email be sent out 2 weeks before the expected due date on the project is. I was currently investigating and looking around to see if this is possible but failed in my research. Is this kind of process a possibility on workfront? Thank you for any help you can provide.

As the Workfront Fourth Quarter Release is scheduled for next week (October 16th), this webinar highlights the new enhancements, including the New Requesting Experience, AI Reviewer, Workload Balancer updates, as well Planning and Fusion features, and so much more!  If you weren't able to attend - no worries! The links to the slide deck, recording, and transcripts are listed below. Be sure to review all of the release notes on Experience League, as not all features were covered in the webinar.   A HUGE thank you to the Product Management teams for joining and sharing additional details around these new enhancements! If you have any follow-up questions, be sure to post those as a reply to this discussion. (We've also included the discussions from the Q&A pod in the comments below.) Slide Deck PDF  Webinar Recording  Webinar Transcripts  Looking for what’s next for Workfront? Don't forget to register for Workfront 2nd Half 2025 Roadmap Webinar to

Before unified approvals became a thing, we used to be able run reports showing assigned approvals that any user could run for themselves using the $$USER.ID wild card. Now, the only place that assigned approvals are listed is the home page and I haven't been able to figure out how to create a report similar to the one we used to use. I would be willing to switch to using the home page but, as someone managing a team with assigned tasks, I can't filter tasks by working group on the home page. I'm left with having to use a custom dashboard / report to manage tasks and issues, and the home screen to manage approvals. Is there a way to create a report that could be added to my custom dashboard and list all of my assigned approvals?

Hi, I know you can create a parameter report to list all reports a field is being used on.  1. Does this mean the field is in the filter or the view (or column)? 2. Has anyone been able to create a report to list filters a field is being used on? I have tried combinations between an API call or even the Data Lake to see if I can pull data.  Curious if anyone got close to this?