Adobe Target

how do i test in QA an excluded audience represented by a string of kws inside the url?the problem is that the QA urls are already defined. How can I go ahead to test query exclusion in QA?ex: Site Pages: Landing Page Query doesNotContain xxxxx 

Hi!  I've created a Target Activity using experience cloud segments (specifically from Analytics) and I would like to know how can I limit the number of times a visitor sees the activity. This is the segment I've created. Here's the logic: If a visitor sees that page within their visit, them I'll show a specific message to them whenever they return to my home home. But I would like to show the specific message just a certain number of times (for example 5) then, the message should be off for them or they will have to be no longer in the activity. Which is the best way to do it? Taking into consideration that I'm creating segments in Analytics.   Thanks a lot for your help 🙂

Hi community! Just wanted to ask a question about A4T. When you archive an Adobe Target activity - does it remove all the historical reporting for workspaces created in Adobe Analytics when the experiment was setup using A4T?

Is it possible to view which experience was the winning version when using A4T reporting?My use case is wanting to get a count of all the winning experiences launched in a particular timeframe.

Hi All,I am creating an regional mbox for my implementation.Below is the code that I have written. I am getting an error as shown in the snapshot . Please let me know what is correct way to write the code in selector section(highlighted in bold in the code)  for  "adobe.target.applyOffer" $('.col-lg-4.col-sm-6').eq(1).addClass('mbox-name-homepage-txt'); adobe.target.getOffer({ "mbox": "txt", "params":{ "name_of_page":"Profile Page3", "pro_uname": "Uber CRO3" }, "success": function(offer) { adobe.target.applyOffer({ "mbox": "txt","selector": ".col-lg-4.col-sm-6.eq(0)", offer: offer }) }, "error": function(status, error) { console.log('Error', status, error); } });I have also used "selector": "(.col-lg-4.col-sm-6).eq(0)" and it is not working     

I need help to understand how Target determines what parameters to include in the /mbox/json request when getting offers. The exact issue I have seems to be caused by some legacy from people who don't work at the company anymore and left no documentation, so it's quite puzzling.When I check the request in the browser's debugger, I can see:parameters added out of the box, like screenHeight or mboxTimeparameters added by our custom codea few more that come from elsewhereThe ones from the last part are definitely not out of the box (their names refer to some of our internal processes), but they are not mentioned in our custom code. Where else can they come from?Our at.js version is 1.8.2.

Dear Team Iin process to use Adobe Target Delivery APIs for Mobile Personalization. Below end point i am using it https://<clientCode>.tt.omtrdc.net/rest/v1/delivery?client=<clientCode>&sessionId=d359234570e04f14e1faeeba02d6ab9914e'   Body Part of request {"id": {"tntId": "XX"}, "property" : {"token": "XX"}, "context": {"channel": "mobile"}, "prefetch": {"mboxes" : [ { "name" : "OfferSlot1", "index" : 1 },{ "name" : "OfferSlot2", "index" : 2 },{ "name" : "OfferSlot3", "index" : 3 },{ "name" : "OfferSlot4", "index" : 4 }] } } }' Note: XX  i have used masked values. Dont consider this as actual value i used in API call. I am getting below error{"status": 400,"message": "Errors: field - [context] - MobilePlatform should be provided only for mobile channel;"} I am not sure what should be done in this case?   

Hi, I get some JSON offers before page rendering and apply the changes ( if there is a need ) using a custom function, now I want to keep listening to them and apply again without having to refresh the page, is this possible ? Thanks in advance

Trying to load Target with Adobe Launch, ended up with the "Adobe Target content delivery is disabled"-error on pageload. So I´ve been reading through the forum in search of how to solve the issue withut success , tried to add the cookieDomain to window.targetGlobalSettings  (in the at.js header) but that did not help, the site is running on heroku so its on a subdomain to herokuapp.com, added full hostname like xyz.herokuapp.comIs there any other setting to be added as a global setting that i am missing? thanks in advance

We are handling customer's couple of websites public facing website as well as their customer's portal website which is hosted under subdomain of their public facing. On both websites we have personalization & recommendation use cases. Till one week back using VEC we were able to configuring A/B, XT on both websites. However since that week we are unable to load the customer portal website(password protected pages) in VEC. Application not loading beyond login page. Outside login and overall website behavior is normal and as per expectations. Public facing website is also working as expected in VEC. Also earlier cross login session between portal and Adobe target VEC was also working fine where in we used to login into customer portal first in one tab and in separate tab (same browser) we used to browse portal in VEC and we used to configure respective activities on various pages of portal (login session was getting shared across 2 tabs). This is also stopped working.

We are using Target loaded by Launch and consider using Target's Visual Composer with Experience Fragments exported from AEM. We also have quite a lot of components with custom JS initialization code which will be used in these fragments if we start using them.What is the recommended way of calling this initialization right after an offer with a component is loaded? What event should our code handle to achieve this, if we don't know exactly when the offer will be loaded? Also, what will change in the approach if Launch's script is loaded with "async" or "defer"?Our current Target version is 1.8.7.

Hi, Any suggestion on how we can handle the impression capping for each experience in 1 mbox. For eg: if i have 10 different experience in 1 mbox, i want to show each experience 3 times to the user. Any thoughts? With this link(https://analyticsdemystified.com/testing-and-optimization/how-adobe-target-can-help-in-the-craziest-of-times/), it looks like we can use profile script but would like to know how we can handle for each experience.

Hello,I'm working to exclude outdated articles for a recommendation activity but I'm having some trouble with the profile script that is supposed to return the current date minus 60 days, in order to create a 'greater than or equal to' audience to exclude old articles. Here is the script I'm using, seems to be something wrong with the syntax because Target wont let me activate it. Any advise? Is there an easier way perhaps? 

We usually run a report in adobe analytics for all of our target A/B: tests currently running. In order to verify that our visitor traffic is correct I create a page report for the page we're testing next to it. Currently there's a few of our tests that aren't matching up with the page report. Sometimes I see only 50% of the traffic in analytics for target vs the page report. When I dig in further I see a good chunk of the traffic in the page report is "unspecified" visitors. Could you please explain why this might be happening?  

Just wondering if there's another way that someone had tried to test when visitors click the "google play store" and "apple app store" on their website other than using clicked an element in target? 

Hi Team,  I would like to create a JSON offer in Adobe Target by passing contnet URL. Please help me to create JSON offers in Adobe Target (Adobe documentation not helping much).   Thank You,Uma        

Join us for the next monthly Adobe Target Community Q&A Coffee Break,  taking place Wednesday, December 8th, 2021 @ 8am PT 🗓️☕Be sure to MARK YOUR CALENDARS with a link to this thread☕🗓️ We'll be joined by Robert Calangiu, aka @robertcalangiu,  Senior Product Manager for Adobe Target, who will be signed in here to the Adobe Target Community to chat directly with you on this thread about your Adobe Target questions pertaining to his areas of expertise: Target Setup and Admin UI A4T Integration AEM Integration General Adobe Target UI    REQUIREMENTS TO PARTICIPATE  Must be signed in to the Community during the 1-hour period  Must post a Question about Adobe Target THAT'S IT!  *(think of this as the Adobe Target Community equivalent of an AMA, (“Ask Me Anything”), and bring your best speed-typing game)  INSTRUCTIONS  Click the blue “Reply” button at

We currently capture the first name of the visitor in the DataLayer and would like to pull that to personalize the headline with the name. Looking for suggestions on how best to do that.