Adobe Target

We're trying to run a test where the confirmation page is the same as the initial landing page. The conversion trigger is simply a page refresh and is not loading properly. The error being thrown is attached.

Hi, we've been running test in Test&Target containing 5 experiences. Once the experience is shown to visitor, we also send evar to analytics, that helps to cross check Test & Target data. From the beginning of the test T&T balanced traffic between experiences equally, but after few days, it started to prefer one /first/ experience. We might made any mistake in setup /maybe we should change the test type from "landing page campaign" to "A/B..N campaign" - see screenshots/. Any help or idea would be appreciated.  Thanks

Hello, I have a client that is exploring Adobe Target at the moment, however one question that came up is where (Data centres, physical boxes holding the data) is the data stored ?In this context, "Data" is campaign configuration, HTML offer values, campaign results. Is there any options to choose where the location of the Data is stored ?  The reason why I ask is because we have to comply with legal requirements set upon us that any solutions we use needs to be hosted within Australia. 

Hello,I created a simple test in Target Premium where I'm just changing the copy and targeted based on a query string parameter.  Although I can see the changes in the visual editor, when I activate the campaign, the variation is not shown either when I click the "verify URL" link in the activity or when I trigger the activity.  Any recommendations on what to do will be greatly appreciated.Test URL:  uat2-www.devry.comThanks,Ridder

I am trying to create a new experience using the visual experience composer in Target Standard and am not able to do so due to the VEC not rendering our test site. I have attached what I am seeing as well as what the web site is suppose to look like.I did make sure I enabled mixed content in Firefox. I tried Firefox in Windows and Mac and neither worked. I cannot even get it to run in Chrome so I have not tried it there.Any guidance on how to get this working would be greatly appreciated.

Hey Guys, Is there a way in which i could get information, whether a page has mbox and is there an active campaign on that mbox, programatically. Something in the API that i have missed. It would greatly help, as I am trying to make sure the developers know about active campaigns before they start making changes, not to mess up something horribly, when they make dev change.Something like a flag that i can use, maybe ?  Thanks Raghav 

Hi there,I've set up a few MVT / landing page testing campaigns but haven't set up a Display Ad Campaign in T&T before and I had a few questions..Our client is interested in essentially doing MVT testing within banner ads. We would test ad elements such as: color, image, headline, CTA, copy.Is this possible and is this considered a Flash campaign or a Display Ad Campaign?What is the difference between a Flash campaign and a Display Ad Campaign?Would this type of campaign use mBoxes or Flashboxes?I will likely have more questions pending your response. Thanks for your help!

I didn't change anything but suddenly today my Target Standard experience targeting tests are broken.  I.e., http://www.prometheusreg.com/california/mountain-view-apartmentsAny suggestions? Thank you!

I drag the adobe banner component into the search result page, but the bannerArea property has no values in the drop down. Does anyone know where to define the values? I looked at the banner component jsp, The adobe SearchPromoteService has a method called getBannerAreaList(memberid, accountnumber), so the list most probably is defined in Adobe site somewhere. Can someone point out where it is or any documentation I can follow?Thanks.

When using zip codes to geo target, do I just use a comma in-between each one?

Hi,I'd like to pass information about what campaign and experience a user is receiving from Target, into Analytics for later analysis. I believe there is a way to make a call to target on a page, to receive those information. However, I can't find any information about it.Does anyone here have experience doing this, and can guide me in the right direction?Thanks./Løjmann

Does anyone has any thoughts about using Adobe Target to split outside-USA traffic and direct them to a different website? Is this a good use case for the product?

I am trying to access saveCampaign API for testing purpose.I followed the instructions provided, formed URL to create a plain campaign with URL  : https://testandtarget.omniture.com/api?client=user&email=user1@acme.com//testandtarget.omniture.com/api?client=user&email=user1@acme.com&password=pword&version=1&operation=saveCampaign&thirdPartyId=extID501&version=1&campaign=<campaign><id>NNNN</id><name>Campaign Name</name></campaign>ofcourse, by editing proper email,clientID and password.I get below mentioned error message : This XML file does not appear to have any style information associated with it. The document tree is shown below.<error><message>A generic Exception has occurred.</message><code>500</code></error> However the operation listCampaign works fine and returns a list of campaigns.It would be a great help if someone could help. thanks in advance. 

Hello, we are deploying target on homolog environment, which have restricted access. When trying to load the URL of our site onto visual composer, we got a error message. What is happening?[img]Target Error.PNG[/img]

Hello T&T Community,Does anyone know if it is possible to get (download) a specific parameter using the API? Basically we have been running a test for a few months and we are passing a "custom parameter" within each mbox call, now I would like to get the list of those parameters however I couldn't find any information in the documentation.Any help would be highly appreciated.Best Regards,Ivan

Good Morning! I am relatively new to Adobe Target and am looking for some insight on how to set up an A/B test for our direct traffic to our site. I am looking to show one set of our customers the default expereince and then I have something different lined up for the other group but can't quite figure out how to target direct traffic only. Thank you for any help you can provide. Jessica 

Right now the marketing cloud "Customer Portal UI" is down again. Most products can still be accessed via the Legacy Product Logins. However, Adobe Target Standard is inaccessible when the cloud portal is down and there is no legacy login or workaround for accessing it. This means that a considerable amount of highly visible content showing on our site (including always-on Automated Personalization shown to all visitors) cannot be modified, leaving us exposed when we have important/timely promotions that need to be updated (e.g. product launch, key events, etc.). Also, if a content mistake/issue is reported in one of our campaign experiences, we have no way to fix while the cloud portal is down.What is being done to address this downtime exposure for clients who have embraced the new Target and have multiple campaigns running all the time? Are there other users of Target Standard out there affected in this way by marketing cloud portal downtime/maintenance? (This is the second time in

Hi!I've noticed it is not possible to receive a campaign type form any Target API methods. However one needs to provide it when e.g. updating a campaign. Is there a fix/workaround for that?I would appreciate your answer very much!

When should I use the mboxCreate/Define/Update functions?

Hi,I'm very new to Target Classic and have been searching the documentation for a solution to my question but with no luck.What I need to do is serve a specific Offer depending on whether a custom mbox parameter value exists in an array of values.So far, this is what I have:1. Pass in my mbox parameter2. Create 3 experiences and target a Custom Segment for each Offer. Each Custom Segment uses Visitor Behavior to check if my custom parameter is equal to a single value.3. If the mbox parameter is equal to specific value then, show that Offer.This all works right now, but I'm only checking against one unique value in each Offer. I need to compare the mbox parameter to an array of values for each Offer and if the value is found in the array then show that Offer.I've tried creating Profile Attributes for each Offer, for example:var offerBArray = [ '1','2','3' ];if ( offerBArray.indexOf( profile.parameter2 ) != -1 ) {return true;} else {return false;}Then setting the Visitor Behavior to this

Hi Team,I have a question in template(guided_xml.tmpl) configuration in Adobe Search & Promote.This template basically is the structure of the response returned by the Search & Promote. Under the root node "pagination", page positions First,Last,Previous,Next,viewall can be configured. Can these values be configured in any language other than english?The specific issue i am facing is, when the page position is configured in chinese language, Pagination object's hasPrevious() and hadNext() methods always returns "false", due to which the logic for displaying "Previous" and "Next" buttons is not working for this Search & Promote account.Any inputs on this will be highly appreciated.Thanks in advance.Update: Added more details<page position="First"><![CDATA[<guided-page-path gsname="first" />]]></page> is the configuration in english.Can the value for position be in any other language for example, traditional chinese?<page position="页首"><![CDAT

I've set up a few activities on our site, one that targets returning customers and another that targets new visitors. The number of entrants seems very low. (Only 1k over the course of a week or two). I'm concerned that this means that the tracking is not setup correctly. Since both of these are experiments on our landing page/visible on many different pages, I would expect the number of entrants to track closely to the total number of sessions that we see from Google Analytics.

Hi All,I want to ask a question about offers in test and target.We makes rules in offers through Segmentation, is it possible to add rules in an offer programmatic through xml.    

Hi,We are planning to integrate our AEM CQ 5.6.1 system with search and promote functionality. Wondered if anyone is able to help with few questions we had that would be great. We are still in initial stages of implementation so excuse us about these questions.Thanks in anticipation.1) Our site structure is locale specific and relies on GEO IP location functionality to redirect the request to the correct location. We believe that search promote crawlers seems to run its indexes through american ip addresses and hence our GEO IP always seems to redirect its request to our american servers and hence reads invalid sitemap. Any ideas if we are able to update search and promote to use GEO IP so that crawler server IP address is europe when indexing from europe ip address. Any other alternatives, perhaps we should have a separate search and promote configuration for EU and US so they can originate from the desired IP addresses ?2) We seem to have one search and promote account for each local

How do I send an invite to a new user to join Adobe Target?