Adobe Marketo Engage General

I'm trying to export the Results from a Smart Campaign to show my Account Managers the Opens, Delivered, etc from the Activity Type but I need to also show the Account Manager field. I cannot seem to find a way to get this field into the Smart Campaign Results. I also created a Smart List but I cannot add the Activity Type information. What is the best way to pull this data?

I have created a nurture program. I pulled in the contacts into stream 1. However, the first email has not been sent.SUMMARY (shows 63 members pulled in)STREAM 1 (has 2 emails)CADENCE (set for yesterday and happens every 2 weeks on Tues, Wed, or Thurs)TRANSITION RULESWhat am I missing? 

Is it possible to export the full activity log for a lead? We're looking to do an analysis of leads and are combining various data sources. Having the full activity log would be beneficial.

So I've done a few regular email nurture campaigns with various emails and streams. However, I've never done a Nurture Campaign with the nested program in the stream and I wanted to see if anyone had some examples they've done. Part 2 of this question is about cadence. In the past, I've set the cadence to send to run once every two weeks on Tuesdays, which has worked relatively fine. But, correct me if I'm wrong, no matter when you get added to a nurture campaign, you'll always get the emails based on when the next cast is going to send. However, my manager wants anyone who added to the SFDC Campaign linked with the nurture campaign to get the first email the next day and then wait two weeks from the first send before the next email goes out. Does this mean I should do a nested program with aSmart list: Trigger - added to SFDC campaign Flow step - wait 24 hours                     Send email #1                     Wait 2 weeks                     Send email #2                      Wait

Hi , I have a set of emails running in a program and I would like to make some changes in the live emails and keep them as a draft.The issue I am facing is that I want to approve the new draft emails and unapprove the existing ones and sometimes this action needs to be done during night time as well.Is there a way we can automate the draft approval at certain time??Urgent help would be appreciated.Regards, Shweta

Very basic question about Account Based Marketing in Marketo: Is the ABM tool itself an add-on feature in integrations? For people who are currently using it, how useful is the feature for your marketing and sales org compared to tools like Terminus and Engagio? #abm tool‌ #account based marketing strategy‌

Hi,I'm using Facebook Lead Ad with Marketo and so far everything is working fine. However, I need to add custom questions to the form and map them to a field in Marketo. In the launchpoint service configuration, when I try to map a "Facebook" field with a "Marketo" field, I only see available certain fields in the Facebook drop down menu (see below).Do you know how can I get a field added to that dropdown? Is it configured somewhere in the Facebook page?In addition, I also want to include an "opt-in/opt-out" checkbox in the Facebook form and have the preference selected sent to the "Unsubscribe" field in Marketo. However, i haven't been able to pass that value to any field in Marketo. I'm starting to believe that the issue might be to the fact that is a boolean field, but is just a "hunch".Have any of you been able to successfully send the value of a "consent" radio button to a field in Marketo?Very much appreciated!

Our business has a lead field called "uniqueID" that we use to identify unique devices/people in our database that have created an account on our site.Right now, that uniqueID is stored in an "Account Custom Object" that holds all the other account information - First Name, Last Name, Address, Company, etc.We want to add the uniqueID as query string to all URLs in Marketo that point to our website. I know we can use Velocity Scripting to append that to urls as a token, however, not all people in our database have an account with us and therefore don't have the Account Custom Object.My question is three parts:If a user doesn't have a uniqueID and we use velocity scripting to append it to urls as part of a query string, will the link break?Is there a way to have a field in a Custom Object like uniqueID be populated into a regular contact field?Is this something Marketo already does? I feel like I've read somewhere else before that Marketo had a recent release or upcoming release where th

On our site there are activities that members take to earn points and then they can use those points to enter drawings.I would like to send a monthly email based on the following.List the activities where the status equals “Completed”.Only show the activities that were completed this month based on the column updatedAt and list them (if there is more than one) in descending order based on the date.Show the name of the completed activity and the points earned.Add up the points earned this month and show the total number of points earned. Trying to break this project down, I am first trying to get the list of activities a person has completed. However, I am finding that it not only gives me the information in the entire row, it ignores the “Completed” status and gives me activities a person had started as well as completed.Here’s the code #if (${sPAdActivity_cList.get(0).activityStatus} == "Completed" )#set( $activityDescription = ${sPAdActivity_cList.get(0).description})#else#

Is there a way to access the Opportunity ID from SFDC?

We're looking to move away from localised forms towards global forms to enable progressive profiling, make it easier to update everything in one place, and quickly.Struggling with this though - so we'll have one form for all lead gen initiatives. We currently embed our forms on WordPress pages (we actually add to a Marketo LP and use that URL within WordPress to embed). We currently handle the thank you/re-direct upon form submission within the form itself, because we create a new form per new initiative.Given that we'll now be using the same form across multiple WordPress LP's - how can we manage the thank you page redirect moving forward for every different initiative? Our thank you pages are created in WordPress too - in most cases this is actually just a redirect to a PDF report, whitepaper, etc.I need a way that's scalable, and easy to follow for people with basic Marketo understanding. Ideally though, I want this to be managed centrally to minimise chances of errors. Is there som

I'm specifically trying to identify what these two fields are telling me:   Success:        false   Acquired by:    falseI'm also curious as to how the only line item in the lead's entire Activity Log related to this Program shows they became a member, however, nothing ever happened again to them despite the program deploying.This predated me but I'm trying to play Sherlock Holmes to see how this lead was not sent a vital email 19 months ago notifying them of a significant price increase to their account that began then. Now 19 months later they are justifiably outraged.It's obviously human error but I'm still curious as to specifically what "Success" (presumably this refers to program success) and "Acquired by" means as well as how one can become a member of a program and then nothing else (presumably this means they entered the program but nothing happened because they were not a part of the Smart List audience the emai

Hi!I am a brand new Marketo user coming over from Pardot. In Pardot forms are embedded using iframes and the "Embed" code for that is automatically generated. I notice that with Marketo we only have scripts... Does anyone know if converting the scripts to iframes is possible? If so, how might you do it? Thanks!Steph

Hi all,We have a triggered program that listens out for changes in the fields that we want to demo score on and if it detects any, it does the following:1) Clear Demo Score2) Set Person Score = Behaviour Score3) Run separate Smart campaigns that will add to both the Demo and Person score points based on the Demo fields (Industry, Job Title Etc.)This works fine, but it is causing negative impact on lead routing.Our scoring is based on 100 points Person Score (made up of up to 40 for Demo and 60+ for behavioural) sends a lead to inside sales.Whilst the demo re-scoring is takes place, the score can drop to below the 100 point mark and can then go back up again to over 100.  For these case, the router will re-route as though it is a brand new AQL and will send some email notification, much to the annoyance of the Lead Owner, as this person has not done anything new.How do I enable triggered Demo scoring whilst not affecting rerouting upon AQL in such manner?Thanks in advance for any advice

Hi all,I am seeing a weird issue in our client's Marketo instance i.e Marketo is tracking all webpages on their website as well as Eloqua Landing pages, when I goto test contact record activity page I can see "visit web page" there. However, I have setup a scoring campaign where I want to score contacts based on visit web page. The smart list is a trigger i.e. "Visits Web Page" contains = "List of pages" (here I have list of pages I want to track each on new line as we usually do in Marketo).I am seeing that the trigger campaign is scoring contacts for webpage activity (website) as well as landing pages. But it is only scoring those landing pages where subdomain is "subdomain.domain.com" and not the one where subdomain is online.subdomain.domain.comNote: In their Marketo instance they have setup the landing pages CNAME in this way > online.subdomain.domain.com. Not sure if this is causing the issue or if there is something wrong with trigger itself.Thanks

My organization tracks lead and opportunity attribution by marketing channel - i.e. events, webinars, advertising, etc. has its own lead and opportunity quota. We now need to figure out the same for nurture campaigns.  (we do last-touch opportunity attribution)Currently, we treat nurtures as their own lead source. However, any person that submits a form for gated content in a nurture sequence is now attributed to 'content' rather than the nurture itself.Any insight as to how people out there attribute leads & opps to nurtures?   Are content downloads from your nurtures attributed to content or the nurture program itself?  Again, we use last-touch attribution.Thanks!

I have an engagement program where I pause leads for 2 days before they get their first email in the engagement stream. I add them to the correct steam of which they become a member (confirmed). I then change the engagement cadence to "pause", wait 2 days, and then change the engagement cadence to "normal". Why are leads not getting emails after the engagement stream is set to normal? Am I missing something?Thanks for the help!

Good morning all.We are trying to use Azure logic app connectors to attach to the Marketo REST API.Azure Logic App connectors wants the following detailsAuthorization Url: The API authorization endpoint to authenticate with the service.Token Url: The API endpoint to get the access token after the authorization has been done.Refresh Url: The API endpoint to refresh the access token once it has expired.I've looked through the Marketo documentation.  As best I can tell, Refresh isn't available, but that's OK.  We can just call the Token URL again.However, it seems like Marketo doesn't use the Authorization URL, just the Token URL.  i.e. [My Instance Here].mktorest.com/identity/oauth/token, with client ID and client Secret.I'm sure I'm missing something blindingly obvious.Help....CheersJo

We are currently in the process of being on-boarded and building out our Marketo instance. I have heard some horror stories with the Design Studio and images and file organization getting out of hand. I am hoping to get us started on the right foot in terms of organization with the Design Studio.Does anyone have any recommendations on best practices for folder structure for assets and naming conventions they use to organize those assets? #design-studio‌ #naming convention‌

I need help on building a drip/nurture campaign structure for manual list upload of users who are incrementally loaded into an application. I feel there are a ton of ways to go about this but I would love some advice on what works best in my situation.Situation:A list of users receives a specific email on a Tuesday. After the email is sent, we wait one week to see if the users activates on the application at which point they will go down one of two tracks: nonactivated and activated.Nonactivated track - Users who do not have an activation date field filled will need to get a set of emails sent every Tuesday, but if they activate during this campaign they will need to be removed from this flow and switch to the Activated trackActivated track - Users who have an activation date field will get a different set of emails sent every Tuesday nurturing them into further application adoption.What is the best way to go about this? Would it be a combination of campaigns?My thinking is to create a

I am trying to build a report outside of Marketo similar to an Email performance report, after extracting to a data warehouse activity types 6,7,8 and more through Bulk API.Everything was going well until I realized that Engagement Programs, if they are found in activity 6 under a Campaign ID, don't seem to be tied to a Program ID, and therefore I can't get an Email Name. Actually, the Campaign ID for those engagement programs is a SmartList, found under the SmartList asset endpoint, without Program attribute, whereas the regular email programs are found as attributes of the Campaign in the Campaign endpoint as any one would expect...How can I find the Program Name associated to a Engagement Program Activity entry?@Sanford Whiteman‌ wrote:There's no exposed Activity Type ID for the cast as separate from the send.  You would have to triangulate this (roughly) by aggregating their last stream ID change (which is a separate event) with the send.I am not sure if that could be a clue, as I

I'm currently exploring forms and have a few questions:1) I see that you can set "Visibility Rules" for form fields ... is this the best way to approach dynamically displaying form fields on a global form?2) I also see that the visibility rules limit you to using a number of Marketo fields ... are we able to pull in UTM params and use that as conditional criteria?

Hello community,If I have token parameters within my URL to prefill on a Marketo landing page it directs too, are the tokens values populated at the point of click or after someone lands on the page?Thanks!

Right now we are working on putting a Marketo Form on an external landing page.Our Dev team built a page to put it on in QA and tested it and the form fill activity is not being recorded in our instance.I sent in a support ticket and am waiting to hear back, but I was wondering if there are limitations to form fill activity being pushed into Marketo? Does the munchkin code also need to be embed on the page the form is on? Is this something that needs to be on a live landing page rather than a QA environment? etc...

Just wondering if anyone has added the MSI iFrame in the Marketo solution to the Opportunity Entity or another Entity like Account?THanksTodd.