Adobe Experience Manager Sites

Hello Everyone, We have observed an inconsistency between the Content Fragment Editor and the Universal Editor regarding enforcement of Content Fragment model constraints.A multi-value field  in our Content Fragment model is configured with Maximum number of items = 3.In the Content Fragment Editor, this constraint is respected and authors are prevented from adding more than three entries. In the Universal Editor, the same field allows adding a fourth item, and the value is persisted without any validation error. After saving from the Universal Editor, reopening the fragment shows all four values stored in the repository.This suggests that the Universal Editor does not currently enforce the max items constraint defined in the Content Fragment model.Please confirm:Whether this behavior is expected or a known issue If there are plans to align Universal Editor validation with Content Fragment model constraints Whether any server-side validation or configuration is recommended to prevent t

Hi, To resolve "Deprecated Service User Mapping Detected", I created the following file under the osgiconf of the ui.config"org.apache.sling.serviceusermapping.impl.ServiceUserMapperImpl.amended.cfg.json"Following are its sample content. {   "user.mapping": [        "com.adobe.acs.acs-aem-commons-bundle:twitter-updater=[serviceuser--com.adobe.acs.acs-aem-commons-bundle--twitter-updater]",         "aem-precompiled-scripts:scene7-asset-reader-service=[serviceuser--aem-precompiled-scripts--scene7-asset-reader-service]"     ]}Does it look good to resolve the "Deprecated Service User Mapping Detected"? Or is there anything more to do?  

Hey All,Need your expert opinion on an Adobe Target + AEM Cloud setup.Currently, our AEM homepage is built using a single layout container (all components inside it). Because of this, Target (VEC) sees it as one DOM block, making it difficult to: 1. Reorder components 2. Inject experience fragments 3. Run personalisation without custom JS We are considering a few approaches - 1. mBox container for injection 2. Custom JS to reorder components 3. Nested layout containers (split page into sections) 4. Converting sections/components into Experience FragmentsAdditionally, we have three different user types, where the homepage content varies based on the user. One approach I am considering is to create user-specific content as Experience Fragments, export them to Target, and let Target handle the personalisation. On the AEM side, I would provide designated containers on the homepage where Target can inject the relevant content.From an Adobe best practices perspective, what would you recommen

This is a weird one.  I created a new component. No problems with it in AEM Local or lowest environment Dev.   It was present in the Design mode. I could enable it on my page. I could then add it to the page in Edit mode. However, in the Stage environment, the new component is simply missing. If I look in crx/de, the component is not there in the menu.Anyone have any idea what might have happened?  Or what sort of error messages might help me debug?thanksFiona

I have a requirment where we have a listing page with restaurants (cards). There is a filter and when end user select single filter example cuisine=french. im able to fetch the data from graphql query and return the CFs which has a tag called french. Now if end user selects multiple filters like french and italian then i need to show all the CFs which has tags french and italian through graphql. I have tried multiple ways but im getting null valuessample query:query getDiningList( $langcode: String,$tag1: [String], $tag2:String,$offset: Int,$limit: Int) {  diningList(    includeVariations: true    _locale:$langcode    offset: $offset    limit: $limit       filter:{        _path:{        _expressions:[          {_operator: STARTS_WITH,value:"/content/dam/test/cfm"}        ]        },      cuisineTag:{         _logOp:OR        _expressions:[{_operator:CONTAINS , values:$tag1}],      }        locationTag:{           _expressions:[{_operator: CONTAINS, value:$tag2}]        }    }  ){     

We’re excited to celebrate Arun Patidar ( ​@arunpatidar ), who has been named the 2025 Community Member of the Year for the Adobe Experience Manager community!   Arun is a big reason why the AEM community is such a helpful and welcoming place. Through his consistent participation, thoughtful responses, and deep product knowledge, he has supported countless community members as they work through challenges and get more value from Adobe Experience Manager.  Whether he’s answering tough technical questions, sharing practical tips, or helping move conversations forward, Arun always shows up with generosity and care. His contributions make a real difference and help strengthen the collective knowledge of the AEM community. The Community Member of the Year recognition celebrates individuals who go above and beyond to support others, and Arun truly embodies that spirit. Please join us in congratulating Arun by sharing your appreciation in the comments below. We’re grateful for everything he d

Hi everyone,I’m facing an issue with one of our Content Fragment Models in AEM where a few text fields were intentionally disabled using disabled=true and renderReadOnly=false at the field node level under /conf/<project>/settings/dam/cfm/models/<model-name>/jcr:content/model/cq:dialog/content/items/textfield. In the old Content Fragment Editor (Granite UI), these fields appear correctly disabled and are not editable, but after moving to the new Content Fragment Editor (which is React-based and built on Adobe React Spectrum), the same fields appear editable and authors are able to modify them. It seems the new editor doesn’t respect the traditional disabled or renderReadOnly properties that used to work in the old UI. Could someone please guide me on how to make these fields appear disabled or read-only in the new React Spectrum–based Content Fragment Editor? Any official documentation or best practice would be really helpful. Thanks,Abhishek A.

Hi all, Kindly point me a to a tutorial for each of a simple Content Fragment and an Experience Fragment (with just two fields, say name and address)Creation of Content/Experience Fragment Model Creation of Content/Experience Fragment from it and populating the fields with values. Process of Exposing it via GraphQL API Any Sling Model required ? If so its Code. Usage in AEM Front End (Sighly) with code.. I want to follow along this tutorial along and see this working. A similar tutorial for Experience Fragment also will help. Appreciate all your responses. Thanks,RK.

Hi all, Kindly walk me through a case study of AEM - SFDC Integration using CIF.Please involve1.Typical High level requirements2.Prerequisites3.High level steps to accomplish it.       Configurations       Customizations       Testing4.Any tutorials for me to follow and replicate this integration. I will follow hyper links to go deep on any of these steps. Appreciate all your replies. Thanks,RK.

Hi Everyone,  We had a 3rd party DAM system which was tied to our dialog by a custom sling:resourceType “/apps/custom-connector/core/ui/components/content/custom-pathfield”This is now being replaced with “cq/gui/components/authoring/dialog/fileupload” modeled on Image V3 component to allow Remote Asset Picker feature on the dialog.Previously if we had a field say “heroImage” which hosted the old URL “https://media-www.abc.com/test.png” This is now replaced by having a fileReference field “heroImagefileReference” which hosts the delivery API URL when an author selects the image from remote DAM instance such as “/urn:aaid:aem:000a885c-3807-4fbb-9a2f-9a6ae3120ccf/58fb9408-test.png”The image renders well on both authoring dialog, editor.html view and even published page.We also have written the sling model such that if no value is present in “fileReference” then we read the value in original “heroImage” to continue rendering the image. This works fine on view mode but in the authoring dial

If you build content-heavy AEM sites, you know the pain: designers live in Figma, content authors live in AEM, and someone is stuck manually copying text and assets between the two. This article walks through an n8n workflow that automates that pipeline end‑to‑end: from Figma designs to AEM Content Fragments, complete with uploaded assets and AI‑generated SEO tags.I built an n8n workflow that automates this pipeline end-to-end — from Figma designs straight into AEM Content Fragments, with DAM asset uploads and AI-generated SEO tags handled automatically. Check out full article here: https://medium.com/@vorajineet/building-an-ai-driven-pipeline-figma-designs-aem-content-fragments-with-n8n-4a0a67eb06b2 

Hi Team,We are migrating all our assets to a separate AEM Cloud instance from a 3rd party DAM.Our sites instance is setup in another program while the assets is on a different program, We want to use our current components such that they are able to pull and render the assets remotely.Following https://experienceleague.adobe.com/en/docs/experience-manager-cloud-service/content/assets/dynamicmedia/dynamic-media-open-apis/integrate-remote-approved-assets-with-sites# we are able to leverage image v3 component to fetch assets remotely.However in our custom component we were not able to do so. The previous DAM image URLs were represented in these custom components as simple textfields.We modified and added the below properties - Changing sling:resourceType from textfield to fileuploadsling:resourceType="cq/gui/components/authoring/dialog/fileupload"enableNextGenDynamicMedia="{Boolean}true"fileReferenceParameter="./fileReference"fileNameParameter="./fileName"On adding these values we are abl

I'm using 6.5.21 and trying to call the google maps api from backend. As part of it, I have added the below dependency. in my core pom.xml  <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-dependency-plugin</artifactId> <executions> <execution> <id>copy-google-maps-runtime</id> <phase>generate-resources</phase> <goals> <goal>copy-dependencies</goal> </goals> <configuration> <includeScope>runtime</includeScope> <includeGroupIds> com.google.maps,com.google.code.gson,com.squareup.okhttp3,com.squareup.okio </includeGroupIds>

TLDR: I'm trying to investigate query param caching (example: /archive.html?page=xxx&year=yyyy) in my local dispatcher and I'm not sure how to test for it.-----------1.  If I visit https://www.myhost.com/content/myapp/sg/en/faq.html, I'm pretty sure an HTML file is created in the dispatcher filesystem (maybe in /var/www/html).If I visit http://localhost:8080/content/myapp/sg/en/faq.html, where can I find the HTML file for this page?I tried this command (after running docker exec) but it only found the default Apache HTTPD index.html. Any ideas? Thanks54177f4f6b8b:/# find / -iname "*.html" -type f 2>/dev/null /var/www/localhost/htdocs/index.html--------2. I am trying to test Cache-Control but no matter what value I set, it seems the value is always the same. ("public,max-age=60,s-maxage=300,stale-while-revalidate=86400,stale-if-error=86400")As a test I tried thisHeader set Cache-Control max-age=0Is this normal behavior?------EDIT1: I tried both docker_run_hot_

Hi everyone,We are migrating our Azure AD B2C login systems, which are currently using SAML, to the OpenID Connect (OIDC) protocol. We came across this documentation: https://experienceleague.adobe.com/en/docs/experience-manager-cloud-service/content/security/open-id-connect-support-for-aem-as-a-cloud-service-on-publish-tier?utm_source=chatgpt.comand we are using it for our implementation.The problem is that we are getting the following error:Caused by: com.nimbusds.oauth2.sdk.GeneralException: The returned issuer doesn't match the expected: https://apexbrasilb2cdev.b2clogin.com/[my_tenant_id]/even though we are setting the baseUrl correctly, as shown in the document:"baseUrl": "https://apexbrasilb2cdev.b2clogin.com/[my_tenant_id]/[my_custom_policy]"And the well-known configuration is located at:https://apexbrasilb2cdev.b2clogin.com/[my_tenant_id]/[my_custom_policy]/v2.0/.well-known/openid-configurationInside the .well-known file, the issuer is defined as:"issuer": "https://apexbrasilb

Just more of a question to other AEM users. Have you ever experienced delays when trying to publish multiple pages?We’ve noticed in our environment when we select 20 or more pages to publish in one go that only one or 2 publish and we have republish the remaining pages again.Any suggestions on where we could look to optimize the queue or any tips or tricks that you can suggest?

We still use the foundation content fragment component (/libs/dam/cfm/components/contentfragment).  It is listed as deprecated but is still functional in recent 6.5 SPs and I haven’t seen any documentation that it has been removed.We are having issues with it in 6.5 LTS.  After adding it to a page and selecting the content fragment, the check is greyed out.  Existing content fragments components still render correctly but switching to a different fragment causes the check to grey out also.  

After building the code the bundle is in still installed state.it showing the below import is missing like that it is showing . Can you please helps on this .this aem 6.5+TCRegardsSesha sai.Cc : ​@VeenaVikraman , ​@patidar.rajesh , ​@santosh_sai2011 .

We have some GraphQL persisted queries that show up in the AEM Query Recorder logs as having large scans to return a single result. Here’s an example of what we see in the logs.  [72.135.49.53 [1773258109390] POST /graphql/execute.json/mycompany/getProductDetails HTTP/1.1] org.apache.jackrabbit.oak.query.stats.QueryRecorder count: 2400 query: SELECT main.* FROM [dam:IndexedFragmentData] AS main WHERE ISDESCENDANTNODE(main, 'x') AND main.[@string@model] = 'x' AND (name(main) = 'x') AND ((ISDESCENDANTNODE(main, 'x')) AND (main.[string@serviceCode] = 'x') AND (main.[jcr:primaryType] IS NOT NULL) AND (main.[jcr:primaryType] IS NOT NULL) AND (main.[jcr:primaryType] IS NOT NULL)) ORDER BY main.[jcr:path] OPTION (INDEX TAG[contentFragments], TRAVERSAL FAIL)What’s jumping out to me is the “QueryRecorder count: 2400” when there is only 1 record returned. And when I run the same query locally and look at its performance in the Query Performance tool it shows as scanning only 1 row. So I’m wonder

Search Facets editor is appearing empty , No properties are visible to edit.http://localhost:4502/libs/cq/core/content/tools/customsearch.html/conf/global/settings/dam/search/facets/assets/jcr:content    

For all of the pipelines, production and non-production, the code coverage results always 100%, but this is impossible, because we haven’t all of coverage and in local with JaCoCo is less then cloud environments.What could be the problem?

We are seeing from time to time the following exception in the logs of the publish instance, related to sling distribution.We haven't configured anything specific for sling distribution, so it is working ootb.We haven't experienced any particular issue related to this exception, but we see it often, and wonder if it's a real error or if it should be ignored.It's logged as INFO, which is already a bit confusing.02.10.2025 09:04:27.513 level=INFO [pool-45-thread-1] org.apache.sling.distribution.journal.impl.subscriber.Announcer Failed to send discovery message for agent publishSubscriber, Error sending POST request to url=http://content-distribution.ns-team-content-distribution.svc.cluster.local:8080/distribution/topics/discovery/sources/148472-1512067-b22574e0-501f-478a-a829-35c1c2a8acc2/types/DiscoveryMessage, status=500, reason=org.apache.sling.distribution.journal.MessagingException: Error sending POST request to url=http://content-distribution.ns-team-content-distribution.svc.cluste