Adobe Audience Manager

Greetings,We wish to onboard offline data in our AAM instance. The article mentions the pre-requisites but I could not find any step-by-step article which will guide me through the process.For starters, I was able to achieve "ID synchronization" using the method mentioned in this article. Can anyone confirm if this approach for id-sync is valid to achieve offline data upload too? If not, the other methods mentioned here are not intuitive and I am not able to understand from where to even begin.Coming to the second process of file upload. I can see there are ways using FTP and S3 but no proper documentation on how to even begin with? I did come across a forum post where one of the rep mentioned file uploading via "People" section under the 9-dot drop down on the top, is that the way to go if not S3/FTP?I would really appreciate if someone could break down the process of uploading offline data in simple steps. I am very new to the tool so please excuse me if I missed on some trivial deta

I am getting an error in S3 Browser app while accessing the demdex-s2s-clients/<abcd>partner bucket. Kindly, help

HiI have a couple of questions about segment and trait population. Appreciate your helpQuestion 1 We have segments in AAM that are based on the following profile merge rule: 'No Authentication Profile' + 'Current Device Profile'The segments are made up of on-boarded traits from our CRM cross device data source (no rule based traits). I would therefore expect the population of these segments to be 0. However we see that these segments are populated. Can you help me to understand this please?Question 2@Our 1st party data source is configured to use profile merge rules. According to Adobe documentation about trait association: If the data provider is configured to use Profile Merge Rules for cross-device targeting, the data available for targeting shortly after an ID sync identifies to the matching Audience Manager visitor ID.I uploaded the following 1st party CRM data on day 1:user1     "has_fibre_broadband"="Y"AAM correctly associated 3 devices to the corresponding trait (total trait po

Hi there, I'm attempting to complete the steps outlines here: Audience Manager Targeting Integration and am stuck on the second part of Step 1:After joining the program be sure to "Request Product Access". This will provision your developer account which is needed for Adobe to do the backend configuration for your integration.The response from that link is unauthorized:You have attempted to access Partner Partner Portal content that requires an additional level of permissions.If you think you should have access or need additional information, please contact Partner Help Desk.Looking for suggestion on how to proceed. Thanks.

Hi,I tried to call and contact Adobe for Audience Manager Subscription for my organisation and Details any idea how i can get that?Also any details of sales team of adobe to contact them directly will be helpful.RegradsBhavaya Tyagi

Hello,We have recently setup Server Side Forwarding from our Adobe Analytics instance to Adobe Audience Manager.Queries:How do we test a successful SSF implementation in AAM UI since “Unused Signal Report” is missing? Where do I find this report, it is not present in it's usual location.Will AAM create a data source automatically post implementing SSF? If not, what is the best way to create it manually and ensure that it is indeed fetching data from our Adobe Aanalytics-SSF only?Thank you in advance.

I am trying to bring AA props and eVars in AAM, just trying to understand when would I be able to them in Unused signals report? As of now, it reports the signals for date (T-2)? Is this not realtime or near realtime?

HelloMy offline data sometimes delivers value pairs like this:"MANUFACTURER_CODE"=""which means I need to create a trait for those that had no value.If I use regex like "MANUFACTURER_CODE"  matchesregex  ".*" will give me all that have ANY value and then in the segment I can use is in an AND NOT rule.  I would like to have a trait for the NULL or EMPTY value insteadIs this possible?Thank you

Hi,Kindly suggest  how to implement Secure deletion strategies using AAM.For more details of Secure deletion strategies, please refer to https://assets.krollontrack.com/hv3/PDF/2016-UKIE-OES-Ebook.pdfAppreciate your support.Thanks,Rama.

HelloWe have 2 cross device data sources in AAM for 1st party CRM data:1) data_source_1 (created with Integration_code_1)2) data_source_2  (created with Integration_code_2)Both data sources contain the same CRM user id's. The difference between the 2 data sources is the data_source_1 contains 1st party data that can be used for both off-site and on-site ad targeting, whereas data_source_2 contains 1st party data that can only be used on-site ad targeting (not off-site). I have a couple of questions about this setup:1) On day 1 data_source_1 receives a milestone file for user_1 (AAM recognises this user): user_1     "has_fibre_broadband"="N"On day 5 data_source_2 receives a milestone file for the same user (user_1):user_1     "gaming_fan"="Y"After day 5 is the user associated to both has_fibre_broadband and gaming_fan traits? Or  does the milestone file received on day 5 overwrite all previous traits, therefore the user is only associated to the gaming_fan trait? 2) What role does Integ

I am running report for List 1 in AA for 1 month for Unique Visitors and same thing When I am doing in AAM I am seeing huge difference.AAM is reporting 60% drop in Unique Visitors as compared to AA.List 1 variable is set to never expire.Even I tried chnaging TTL in AAM to Zero but it didn't work.Do you have any thoughts?

400+ segments need to be migrated from one instance to another. Consequently all traits (6000+)will be migrated too.We replicated traits from the original instance to the new one using BAAAM, and we reached the step of creating the segments onto the new instance.The challenge is to map the recently added traits from the new instance onto the new segments - yet to be uploaded using BAAAM. How do we do this?An example of one segment rule to upload exported using BAAAM. The sids Traits would have to be replaced by the new ones.segmentRule(2499170T OR 2499180T OR 2695679T) OR (2499575T and 2938974T) or (3544630T and 2499575T)Really appreciate if someone could give any insights on this workflow.

How can the AMO use the segment of AAM created by AA mobile SDK data? and what are the use case? Device co-opp  etc and  the possibilityis it value for  money to do AMO targeting

Hi folks,Quick question on SPA and its implementation of AAM. Our AAM is using server side forwarding, which works perfectly across page loads - I can see demdex calls being generated per load, however, the SPA application don't generate any demdex calls despite Adobe Analytics does.Is there any docs on implementation of AAM on SPA? The synch calls on SPA pages works well, but as I said I am not sure if we need to be generating a demdex call on SPA too?Thanks.

Hi - I progressing through the steps listed here: Audience Manager Targeting Integration After review of the document from Step 2 (C2A-AEP Audience Manager Data Exchange) there are some items that I'd like to red line. Who is the proper contact to discuss this with.Cheers,Steve M.

Hi,1. If we need access to the log files created by AAM, who provides access to them?2. Does AAM create log files at all?Appreciate your support.Thanks,Rama.

Hi All,I have created a segment in Analytics and sent to AAM and created one more segment within AAM itself with the same criteria. I want to understand the report variations?  I see there is around 20% more traffic in AAM Segment compare to Analytics segment in AAM. Can you please explain why?And If I pull the report from  Analytics and compare it with AAM with the same date range there is again huge difference.Thanks in advance.

I am going through the "AAM: Technical Foundations (OD)" training for Adobe Audience Manager. I am currently on the "AAM: Web Implementation" section.The first module for "Instructions for Completing Course Exercises" contains a PDF that discusses using a shared training environment.How do I access this testing / training Audience Manager environment for training? How do I access the sandbox / training demo where I can click around AAM and create Traits, Data Sources, etc.Thank you

Hi, I am trying to run a Lookalike modeling using a first party segment as base and Acxiom 3rd party traits. When AAM return the results, I saw two things kind of weird:1. The horizon of chart 'Model Reach&Accuracy' chart started from 84% instead of 0%;2. The top selected traits' relative weight is just 0.5%. I wonder if that's due to using 3rd party data. But I want to see if anyone has suggestion?Based on the current result, I am not sure if this Lookalike model is good to use. Any thought?Thanks in advance!

Reading the documentation about audience manager targeting integration, I can see that the first technical step is "set up a user id sync"There are TWO sync flows:- partner initiated flow- audience manager initiated flowAre both mandatories or can we implement only the partner initated flow?If the answer is "YES",  how can we fill the AAM outbound integration request form?We select "YES" into the option "Data Partner will initiate syncs", but the field that contains the url for ID sync (initiated by AAM) is red and seems to be mandatory.Thank you for supportSilvia AAM Outbound Integration - Request Form

Hi there!I'd read that the recommended way to send Analytics data to AAM is with Server side forwarding, and not DIL code. Now I want to use DFP (DoubleClick for publishers) as a destination, but in this link https://marketing.adobe.com/resources/help/en_US/aam/aam-dfp-requirements.html ​says that DIL code must be deployed in the inventory to work.The thing is that here Analytics to Audience Manager Implementation Guide  says that:It is very important to note that both implementation methods are mutually exclusive one one site. The moment the Audience Library is enabled and AA data collection hosts are configured by Adobe, all Analytics data will start to flow to AAM server-side. So, if the client keeps both DIL and AppMeasurment module, the data will be sent twice to AAM.​So I wonder if there is a way to use the SSF integration way, but deploy DIL code just to use DFP destination, and not get the data duplicated, or if I should go directly with the DIL method from the begining.¡Thanks

Hi,On AAM,  how to Monitor and log privileged user ID access?That means, if a user of a certain privilege logs in to AAM, we need to log a message in to a log file about this.Appreciate all your replies.Thanks,Rama.

Hi,Kindly suggest how to Enable the client to implement techniques such as data partitioning, pseudonomisation, anonymization, encryption on AAM data.Appreciate your replies.Thanks,Rama.

Hello GuysI'm no longer using Adobe Illustrator and Acrobat pro. I tried my best to cancel my subscription, but it seems they made it so hard to cancel it intentionally. Seriously, there is no cancellation button, and I'm supposed to got to the customer support page to cancel it. And when I search for the cancellation method it guides me to the same page.This is very misleading and annoying..Please help me cancel my subscription...

Hi!I wonder how, once completed the server side forwarding set-up, can the data from AA be used at audience manager. Is it enough to reference the eVar/prop name? I don't understand neither how AAM knows where is getting the data from when you set a datasource Please help me